Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Block Moz (or any other robot) from crawling pages with specific URLs
-
Hello!
Moz reports that my site has around 380 duplicate page content. Most of them come from dynamic generated URLs that have some specific parameters. I have sorted this out for Google in webmaster tools (the new Google Search Console) by blocking the pages with these parameters. However, Moz is still reporting the same amount of duplicate content pages and, to stop it, I know I must use robots.txt. The trick is that, I don't want to block every page, but just the pages with specific parameters. I want to do this because among these 380 pages there are some other pages with no parameters (or different parameters) that I need to take care of. Basically, I need to clean this list to be able to use the feature properly in the future.
I have read through Moz forums and found a few topics related to this, but there is no clear answer on how to block only pages with specific URLs. Therefore, I have done my research and come up with these lines for robots.txt:
User-agent: dotbot
Disallow: /*numberOfStars=0User-agent: rogerbot
Disallow: /*numberOfStars=0My questions:
1. Are the above lines correct and would block Moz (dotbot and rogerbot) from crawling only pages that have numberOfStars=0 parameter in their URLs, leaving other pages intact?
2. Do I need to have an empty line between the two groups? (I mean between "Disallow: /*numberOfStars=0" and "User-agent: rogerbot")? (or does it even matter?)
I think this would help many people as there is no clear answer on how to block crawling only pages with specific URLs. Moreover, this should be valid for any robot out there.
Thank you for your help!
-
Hello!
Thanks a lot for your feedback and clearing this out! It worked well.
The robots.txt tester is a good tip!
Thanks!
-
Hi,
What you have there will work absolutely fine with a little tweak. And no need to leave spaces between lines.
Disallow: /numberOfStars=0
However, no need to add the wildcard at the end if there is nothing more after that.
The best way to test what works, is before you go and add it to live, use the Robots.txt test tool in Search Console (Webmaster Tools), add in the lines above and then check to make sure none of your other pages are blocked. They won't be, but it's a great way to test before going live.
I hope this helps
-Andy
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Pages with Duplicate Content Error
Hello, the result of renewed content appeared in the scan results in my Shopify Store. But these products are unique. Why am I getting this error? Can anyone please help to explain why? screenshot-analytics.moz.com-2021.10.28-19_53_09.png
Moz Pro | | gokimedia0 -
Difference between urls and referring urls?
Sorry, nit new to this side of SEO We recently discovered we have over 200 critical crawler issues on our site (mainly 4xx) We exported the CSV and it shows both a URL link and a referring URL. Both lead to a 'page not found' so I have two questions? What is the difference between a URL and a referring URL? What is the best practice/how do we fix this issue? Is it one for our web developer? Appreciate the help.
Moz Pro | | ayrutd1 -
URL Length Issue
MOZ is telling me the URLs are too long. I did a little research and I found out that the length of the URLs is not really a serious problem. In fact, others recommend ignoring the situation. Even on their blog I found this explanation: "Shorter URLs are generally preferable. You do not need to take this to the extreme, and if your URL is already less than 50-60 characters, do not worry about it at all. But if you have URLs pushing 100+ characters, there's probably an opportunity to rewrite them and gain value. This is not a direct problem with Google or Bing - the search engines can process long URLs without much trouble. The issue, instead, lies with usability and user experience. Shorter URLs are easier to parse, copy and paste, share on social media, and embed, and while these may all add up to a fractional improvement in sharing or amplification, every tweet, like, share, pin, email, and link matters (either directly or, often, indirectly)." And yet, I have these questions: In this case, why do I get this error telling me that the urls are too long, and what are the best practices to get this out? Thank You
Moz Pro | | Cart_generation1 -
Is one page with long content better than multiple pages with shorter content?
(Note, the site links are from a sandbox site and has very low DA or PA) If you look at this page, you will see at the bottom a lengthy article detailing all of the properties of the product categories in the links above. http://www.aspensecurityfasteners.com/Screws-s/432.htm My question is, is there more SEO value in having the one long article in the general product category page, or in breaking up the content and moving the sub-topics as content to the more specific sub-category pages? e.g. http://www.aspensecurityfasteners.com/Screws-Button-Head-Socket-s/1579.htm
Moz Pro | | AspenFasteners
http://www.aspensecurityfasteners.com/Screws-Cap-Screws-s/331.htm
http://www.aspensecurityfasteners.com/Screws-Captive-Panel-Scre-s/1559.htm0 -
Canonical URLs all show trailing slash on main site pages - using Yoast SEO for Wordpress - how to correct
We are using Yoast for a number of our sites. We use naked domain as the canonical. I have noticed in the header tags that all our sites show the canonical URLs as having a trailing slash: Example: http;//foxspizzajc.com, when I look at the source code, it shows the canonical as http;//foxspizzajc.com/ Of course, it is much more likely that all sites that link to us will not use the trailing slash - so preferably we do not want that to be the canonical - among other reasons. Does this need to be fixed so the trailing slash is removed? I cannot see how to do this in Yoast SEO or in Permalinks structure for Wordpress. Sorry for my ignorance. Thanks for any help.
Moz Pro | | Adam_RushHour_Marketing1 -
Special Characters in URL & Google Search Engine (Index & Crawl)
G'd everyone, I need help with understanding how special characters impact SEO. Eg. é , ë ô in words Does anyone have good insights or reference material regarding the treatment of Special Characters by Google Search Engine? how Page Title / Meta Desc with Special Chars are being index & Crawl Best Practices when it comes to URLs - uses of Unicode, HTML entity references - when are where? any disadvantage using special characters Does special characters in URL have any impact on SEO performance & User search, experience. Thanks heaps, Amy
Moz Pro | | LabeliumUSA0 -
Duplicate page titles are the same URL listed twice
The system says I have two duplicate page titles. The page titles are exactly the same because the two URLs are exactly the same. These same two identical URLs show up in the Duplicate Page Content also - because they are the same. We also have a blog and there are two tag pags showing identical content - I have blocked the blog in robots.txt now, because the blog is only for writers. I suppose I could have just blocked the tags pages.
Moz Pro | | loopyal0 -
How to check Page Authority in bulk?
Hey guys, I'm on the free trial for SEOmoz PRO and I'm in love. One question, though. I've been looking all over the internet for a way to check Page Authority in bulk. Is there a way to do this? Would I need the SEOmoz API? And what is the charge? All I really need is a way to check Page Authority in bulk--no extra bells and whistles. Thanks, Brandon
Moz Pro | | thegreatpursuit0