Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Rel=canonical and internal links
-
Hi Mozzers,
I was musing about rel=canonical this morning and it occurred to me that I didnt have a good answer to the following question:
- How does applying a rel=canonical on page A referencing page B as the canonical version affect the treatment of the links on page A?
I am thinking of whether those links would get counted twice, or in the case of ver-near-duplicates which may have an extra sentence which includes an extra link, whther that extra link would count towards the internal link graph or not.
I suspect that google would basically ignore all the content on page A and only look to page B taking into account only page Bs links.
Any thoughts?
Thanks!
-
Thanks a lot for your reply Stephan!
I would be super intertesting to read a little more around the subject. Do you have any studies or cases you might refer me to which describe the flow of link equity to "page C" from "Page A"?
Many thanks
-
It's an interesting question. I'll extend your example slightly, so that we have:
- Page A, with a canonical pointing to Page B
- Page A also has a regular link to Page C
- Page B does not link to Page C at all
At the crawling stage, Googlebot will parse all of the links on Page A. So in this case it discovers both B and C (if it doesn't know of their existence already). This is uncontroversial stuff—the use of the canonical tag doesn't affect crawling/discovery.
You might then assume that Google—if it decides to obey the canonical instruction, which of course it doesn't always do—will pass all of Page A's link equity to Page B (minus the small fraction), and then no longer count that link from A to C in the link graph. Almost like a redirect, but for bots only.
However, that doesn't seem to happen. The link from A to C is still included in the link graph. PageRank (or whatever's replaced it) may still flow through that link, even though Page A is not to be indexed.
So to answer your original question, the content of Page A will not be ignored, and neither will its links. The unclear bit is how much Google will value that link from A to C.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Breadcrumbs and internal links
Hello, I use to move up my site structure with links in content. I have now installed breadcrumbs, is it is useful to still keep the links in content or isn't there a need to duplicate those links ? and are the breadcrumbs links enough. Thank you,
Intermediate & Advanced SEO | | seoanalytics1 -
Does Disavowing Links Negate Anchor Text, or Just Negates Link Juice
I'm not so sure that disavowing links also discounts the anchor texts from those links. Because nofollow links absolutely still pass anchor text values. And disavowing links is supposed to be akin to nofollowing the links. I wonder because there's a potential client I'm working on an RFP for and they have tons of spammy directory links all using keyword rich anchor texts and they lost 98% of their traffic in Pengiun 1.0 and haven't recovered. I want to know what I'm getting into. And if I just disavow those links, I'm thinking that it won't help the anchor text ratio issues. Can anyone confirm?
Intermediate & Advanced SEO | | MiguelSalcido0 -
Should my back links go to home page or internal pages
Right now we rank on page 2 for many KWs, so should i now focus my attention on getting links to my home page to build domain authority or continue to direct links to the internal pages for specific KWs? I am about to write some articles for several good ranking sites and want to know whether to link my company name (same as domain name) or KW to the home page or use individual KWs to the internal pages - I am only allowed one link per article to my site. Thanks Ash
Intermediate & Advanced SEO | | AshShep10 -
Yoast & rel canonical for paginated Wordpress URLs
Hello, our Wordpress blog at http://www.jobs.ca/career-resources has a rel canonical issue since we added pagination to the front page and category-pages. We're using Yoast and it's incorrectly applying a rel-canonical meta tag referencing page 1 on page 2, 3, etc. This is a known misuse of the rel-canonical tag (per Google's Webmaster Blog - http://googlewebmastercentral.blogspot.ca/2013/04/5-common-mistakes-with-relcanonical.html, which says rel-canonical should be replaced with rel-prev and rel-next for page 2, 3, etc.). We don't see a way to specify anywhere in Yoast's options to correct this behaviour for page 2, 3, etc. Yoast allows you to override a page's canonical URL, otherwise it automatically uses the Wordpress permalink. My question is, does anyone know how to configure Yoast to properly replace rel-canonical tags with rel-prev and rel-next for paginated URLs, or do I need to look at another plugin or customize the behavior directly in my child theme code? This issue was brought up here as well: http://moz.com/community/q/canonical-help, but the only response did not relate to Yoast. (We're using Wordpress 3.6.1 and Yoast "Wordpress SEO" 1.4.18)
Intermediate & Advanced SEO | | aactive0 -
Rel="canonical" and rel="alternate" both necessary?
We are fighting some duplicate content issues across multiple domains. We have a few magento stores that have different country codes. For example: domain.com and domain.ca, domain.com is the "main" domain. We have set up different rel="alternative codes like: The question is, do we need to add custom rel="canonical" tags to domain.ca that points to domain.com? For example for domain.ca/product.html to point to: Also how far does rel="canonical" follow? For example if we have:
Intermediate & Advanced SEO | | AlliedComputer
domain.ca/sub/product.html canonical to domain.com/sub/product.html
then,
domain.com/sub/product.html canonical to domain.com/product.html0 -
Site wide footer links vs. single link for websites we design
I’ve been running a web design business for the past 5 years, 90% or more of the websites we build have a “web design by” link in the footer which links back to us using just our brand name or the full “web design by brand name” anchor text. I’m fully aware that site-wide footer links arent doing me much good in terms of SEO, but what Im curious to know is could they be hurting me? More specifically I’m wondering if I should do anything about the existing links or change my ways for all new projects, currently we’re still rolling them out with the site-wide footer links. I know that all other things being equal (1 link from 10 domains > 10 links from 1 domain) but is (1 link from 10 domains > 100 links from 10 domains)? I’ve got a lot of branded anchor text, which balances out my exact match and partial match keyword anchors from other link building nicely. Another thing to consider is that we host many of our clients which means there are quite a few on the same server with a shared IP. Should I? 1.) Go back into as many of the sites as I can and remove the link from all pages except the home page or a decent PA sub page- keeping a single link from the domain. 2.) Leave all the old stuff alone but start using the single link method on new sites. 3.) Scratch the site credit and just insert an exact-match anchor link in the body of the home page and hide with with CSS like my top competitor seems to be doing quite successfully. (kidding of course.... but my competitor really is doing this.)
Intermediate & Advanced SEO | | nbeske0 -
Canonical VS Rel=Next & Rel=Prev for Paginated Pages
I run an ecommerce site that paginates product pages within Categories/Sub-Categories. Currently, products are not displayed in multiple categories but this will most likely happen as time goes on (in Clearance and Manufacturer Categories). I am unclear as to the proper implementation of Canonical tags and Rel=Next & Rel=Prev tags on paginated pages. I do not have a View All page to use as the Canonical URL so that is not an option. I want to avoid duplicate content issues down the road when products are displayed in multiple categories of the site and have Search Engines index paginated pages. My question is, should I use the Rel=Next & Rel=Prev tags on paginated pages as well as using Page One as the Canonical URL? Also, should I implement the Canonical tag on pages that are not yet paginated (only one page)?
Intermediate & Advanced SEO | | mj7750 -
Rel=canonical tag on original page?
Afternoon All,
Intermediate & Advanced SEO | | Jellyfish-Agency
We are using Concrete5 as our CMS system, we are due to change but for the moment we have to play with what we have got. Part of the C5 system allows us to attribute our main page into other categories, via a page alaiser add-on. But what it also does is create several url paths and duplicate pages depending on how many times we take the original page and reference it in other categories. We have tried C5 canonical/SEO add-on's but they all seem to fall short. We have tried to address this issue in the most efficient way possible by using the rel=canonical tag. The only issue is the limitations of our cms system. We add the canonical tag to the original page header and this will automatically place this tag on all the duplicate pages and in turn fix the problem of duplicate content. The only problem is the canonical tag is on the original page as well, but it is referencing itself, effectively creating a tagging circle. Does anyone foresee a problem with the canonical tag being on the original page but in turn referencing itself? What we have done is try to simplify our duplicate content issues. We have over 2500 duplicate page issues because of this aliasing add-on and want to automate the canonical tag addition, rather than go to each individual page and manually add this tag, so the original reference page can remain the original. We have implemented this tag on one page at the moment with 9 duplicate pages/url's and are monitoring, but was curious if people had experienced this before or had any thoughts?0
