Data highlighter in WMT displays old version of page
-
I want to mark up a business address for Google Local, so I thought I would use the data highlighter in WMT. However I only just added the address to the the bottom of the home page and when using data highlighter iit is giving me the old version of page to mark up without the address on.
Rather frustrating, does any body have any experience on the time frame until Google updates the page in the data highlighter?
According to this thread it's not even related to the page re caching: Data Highlighter: Start link is pulling an old version of page
-
OK I just checked it and it is now updated to the correct preview.
So it took up to approx 19 hours to change. Although bear in mind I wasn't checking it all the time, could be faster. Also note, if you have started highlighting the old version, when you go back into the saved one it will still have the old preview, so you need to start over again.
I can also confirm the preview in the data highlighter is not connected to Google's cache of the page in the index, as the old version of the page is still cached.
-
Thanks for the tips Thomas. I had considered doing it 'manually' but wanted to experiment with the data highlighter tool.
I'll keep on eye on it and report back the time it took Google to update to the correct preview.
-
The only thing I can think of is Google is showing you what it last indexed and that does sound strange. However there is a other way to put your address on schema properly and quickly so you'll get the local search results you want.
Use this tool http://www.feedthebot.com/tools/address/
it's 100% free and has a lot of extra tools connected that are great
You can also utilize
If you prefer to use micro data which is almost the same thing as schema you can use this tool.
http://www.microdatagenerator.com/
However I have been told not to mix the two causes some issues with search engines. So take schema or micro data is what I have recently been told I have been trying to get a solid confirmation so I think it's a possibility that it would make sense but don't want to tell you something that is not true.
My $.02 use the 1st tool and it will do the job just fine.
It is in the form of a Word press plug-in but also gives you the ability to create schema correctly right on the site and paste it into your code.
The nice thing about it is there's a little box to the right that gives you a exact match of what it's going to look like on your site.
If you don't want it to look like it formatted anything I would use the 1st tool. However both of them are excellent.
One last thing if you're using WordPress consider Yoast Local SEO it seems expensive but does a fantastic job
More great sources of information
http://www.searchenginejournal.com/how-to-use-schema-markup-for-local-seo/
http://searchengineland.com/13-semantic-markup-tips-for-2013-a-local-seo-checklist-143708
Sincerely,
Thomas
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
How to rank a product page
Hello, I have a product page and just did a little introduction ( 5 lines of text) but I have the feeling this is not enough for google. What is the solution ? Is it to increase the amount of content even though it is not going to be user friendly ? Or will google look at the product page I link too and take into account the content on those subpages to boost my "pillar / product page". Thank you,
Intermediate & Advanced SEO | | seoanalytics1 -
Page not being ranked properly
Hi, Wondering if someone could possibly shed some light on why some of our pages are not being ranked properly on Google. For example this page https://www.mypetzilla.co.uk/dog-breeds Keyword "Dog Breeds" we can't be found on and we are absolutely baffled why? Could it be that we are listing all 100 and something dog breeds on one page? Should we introduce pagination or load more as user scrolls down. This page has been up for at least 4 years. Any suggestion or advice would be much appreciated. Many thanks
Intermediate & Advanced SEO | | Mypetzilla0 -
How would you build links to this page?
Hi i have ecommerce store and currently we are looking to build links to category pages like: http://www.theiconic.com.au/womens-clothing-dresses-party-dresses/ What are some natural ways to build links to a page like this? Our SEO agency has done guest posting and forums but these are not natural link building methods and against Google policy. Any suggestions on how to build natural links to these pages? Cheers.
Intermediate & Advanced SEO | | wozniak651 -
Too many on page links
Hi I know previously it was recommended to stick to under 100 links on the page, but I've run a crawl and mine are over this now with 130+ How important is this now? I've read a few articles to say it's not as crucial as before. Thanks!
Intermediate & Advanced SEO | | BeckyKey1 -
A/B Testing - Should I add product descriptions on my category landing pages as well as on product pages and if so . how to do this to avoid duplicate content
Hi All, I recently relaunched a new design on my tool hire eCommerce website and now display my products in grid form on my category landing pages as opposed to just a list view which we previously had on the old design. My bounce rates are alot higher than they use to be and my gut instinct is telling me maybe this is wrong . I want to do some a/b testing using a list view. My question is , previously in our list views we just showed the images and pricing and had on page content on the bottom of the page. The user would click on the product image and they would then we taken to the product page which has the product description , t&c, etc etc.. If I was to do this in my a/b testing but change it so we also displayed the product descriptions as well on the category landing pages . Is there a special way to do this as in effect, we would have duplicate content as the product descriptions are also on the product page?. Does anyone have any thoughts on this as to whether its a No No from an SEO point of view ?... Heres a short url link to one of my category pages - http://goo.gl/QJv5gw Historically we use to rank well for the category landing pages and not for the product pages.Our Rankings are down , bounce rates are higher so I am trying to sort both. We have good content on pages etc. Any advice greatly appreciated as always thanks Pete
Intermediate & Advanced SEO | | PeteC120 -
Redirecting 404 pages
Hello,We have a wordpress site that has some "hidden" pages with weird URL's. Due to the way the site was built (not by us) if we setup our standard practice for 404 pages some site functionality will be lost.Standard Practice for 404's www.domain.com/fafsaf shows 404 error pageProposed solution:- www.domain.com/safaf >forwards to> www.domain.com/404 - shows 404 error page. Will this stop the search engines indexing the pages? - we have also amended the robots.txt to try and stop some pages being indexed but we still keep finding the odd little "hidden" page.The aim is to try and get all the search engines just to index the few simple pages on the sitemap instead of finding all these extra pages.
Intermediate & Advanced SEO | | JohnW-UK0 -
Redirecting thin content city pages to the state page, 404s or 301s?
I have a large number of thin content city-level pages (possibly 20,000+) that I recently removed from a site. Currently, I have it set up to send a 404 header when any of these removed city-level pages are accessed. But I'm not sending the visitor (or search engine) to a site-wide 404 page. Instead, I'm using PHP to redirect the visitor to the corresponding state-level page for that removed city-level page. Something like: if (this city page should be removed) { header("HTTP/1.0 404 Not Found");
Intermediate & Advanced SEO | | rriot
header("Location:http://example.com/state-level-page")
exit();
} Is it problematic to send a 404 header and still redirect to a category-level page like this? By doing this, I'm sending any visitors to removed pages to the next most relevant page. Does it make more sense to 301 all the removed city-level pages to the state-level page? Also, these removed city-level pages collectively have very little to none inbound links from other sites. I suspect that any inbound links to these removed pages are from low quality scraper-type sites anyway. Thanks in advance!2 -
Pricing Page vs. No Pricing Page
There are many SEO sites out there that have an SEO Pricing page, IMO this is BS. A SEO company cannot give every person the same quote for diffirent keywords. However, this is something we are currently debating. I don't want a pricing page, because it's a page full of lies. My coworker thinks it is a good idea, and that users look for a pricing page. Suggestions? If I had to build one (which I am debating against) is it better to just explain why pricing can be tricky? or to BS them like most sites do?
Intermediate & Advanced SEO | | SEODinosaur0