Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
How to force Wordpress to remove trailing slashes?
-
I've searched around quite a bit for a solution here, but I can't find anything. I apologize if this is too technical for the forum.
I have a Wordpress site hosted on Nginx by WP Engine. Currently it resolves requests to URLs either with or without a trailing slash.
So, both of these URLs are functional:
<code>mysite.com/single-post</code>
and
<code>mysite.com/single-post/</code>
I would like to remove the trailing slash from all posts, forcing
mysite.com/single-post/
to redirect tomysite.com/single-post
. I created a redirect rule on the server:^/(.*)/$ -> /$1
and this worked well for end-users, but rendered the admin panel inaccessible. Somewhere, Wordpress is adding a trailing slash back on to the URL
mysite.com/wp-admin
, resulting in a redirect loop. I can't see anything obvious in .htaccess.Where is this rule adding a trailing slash to 'wp-admin' established?
Thanks very much
-
WPEis run on a base server using Apache with a Nginx proxy so you can use the WP engine 301 redirect system built-in or you can simply add a redirect to the HTAccess file. If you would like to use a tool to do this I recommend this one another alternative is to ask WP engine to make a change for you.https://www.aleydasolis.com/htaccess-redirects-generator/non-slash-vs-slash-urls/ApacheJust copy to your htaccess:```
https://example.com/page/**https://example.com/page** ``` <label for="nonslash">**Slash to Non-Slash URLs**</label> > <ifmodule mod_rewrite.c="">RewriteEngine on > RewriteCond %{REQUEST_FILENAME} !-d > RewriteRule ^(.*)/$ /$1 [L,R=301]</ifmodule> **Non-Slash to Slash URLs** ``` ****Apache** https://example.com/page**
> <ifmodule mod_rewrite.c="">RewriteEngine on > RewriteCond %{REQUEST_FILENAME} !-f > RewriteRule ^(.*[^/])$ /$1/ [L,R=301]</ifmodule>
USEING Nginx to do
**https://example.com/page/**
As you see, there is one tiny difference between those two URLs, and it’s the trailing slash at the end. In order to avoid duplicate content, if you are using Nginx you can **remove the trailing slash from Nginx** URLs. Place this inside your virtual host file in the server {} block configuration: > ``` > rewrite ^/(.*)/$ /$1 permanent; > ``` Full example: > ``` > server { > listen 80; > server_name www.mysite.com; > rewrite ^/(.*)/$ /$1 permanent; > } > ``` All done, now Nginx will remove all those trailing slashes.
USEING Nginx to do
https://example.com/page
https://example.com/page/Add a trailing slash by placing this inside your virtual host file in the server {} block configuration: > ``` > rewrite ^(.*[^/])$ $1/ permanent; > ``` Full example: > ``` > server { > listen 80; > server_name www.mysite.com; > rewrite ^(.*[^/])$ $1/ permanent; > } > ``` From now on, Nginx should add your trailing slash automatically to every url * https://www.scalescale.com/tips/nginx/add-trailing-slash-nginx/ * https://www.scalescale.com/tips/nginx/nginx-remove-trailing-slash/ I hope this helps, Tom
-
Hi John, sorry ive been on leave so not checked back on the forums.
Glad it looks like its working for you. I dont think the comments do anything except signify where word press has begun writing to the .htaccess (i dont run wordpress so can't be sure). Normally comments do nothing but signify something useful to the user.
I can try to breakdown the code a little for you, but my htaccess isn't fantastic so its by no means complete.
Firstline: RewriteCond%{REQUEST_FILENAME}!-d
RewriteCond% = This says use this condition if....
{REQUEST_FILENAME}!-d = ... is NOT a directoryRewriteRule^(.*)/$ /$1 [L,R=301]
I believe this bit takes a snapshot of the url upto the final / then rewrites it to that snapshot.The combination of these must mean it doesn't affect your wordpress admin directory. I know this code can break if your install is within a directory (as is discussed in the stackover flow link) but they have provided a solution for that in that topic. I would say test if on your live website to make complete sure it will work as this may be slightly different to your local install. Have a back-up ready just incase it doesn't.
Make sure you check every url including
Homepage
Pages
Posts
Category Pages
Sub Category Pages
Post Pages
Any images or filesTo make sure it is working as expected on all of them.
-
Thanks so much, ATP! It looks like writing the condition into .htaccess does the trick—at least for my local install. Is this because the commands located within the
BEGIN WordPress
END WordPress
comments only apply to URLs outside of the WP admin area?
Thanks again, ATP—that was a very thorough and helpful response!
-
Hi John
Did ATP's solution help you out? Let us know if we can look into this further!
-
Hi John,
I asked something similar myself something myself but im on the Magento platform. This should matter as the solution wasn't platform specific. It just involved editing htaccess file. If your up for editing your .htacccess file then it could be of some use. The topic URL is below and it contains multiple solutions for editing and removing the / and the debugging process we went through along the way. (Courtesy of Andy and Dirk) Hopefully its of some use to you
https://moz.com/community/q/cms-pages-multiple-urls
SUMMARY:
If you know how to edit your .htaccess and your ready to dive straight in this code should do it.RewriteCond%{REQUEST_FILENAME}!-d
RewriteRule^(.*)/$ /$1 [L,R=301]If you want the page with explanations and walk-through please see the original topic as editing your htaccess badly can cause all sorts of errors.
Edit: I realised i was probably a tiny bit lazy and should of probably included this link which is the original link i got sent from stackoverflow with instructions on how to to edit your .htaccess file.
http://stackoverflow.com/questions/21417263/htaccess-add-remove-trailing-slash-from-url
Dirks answer later in the post offer guidance on applying it to certain parameters which should prove helpful if your still having loop problems with the admin page.
-
Thanks for the replies, Donna, Martijn. I am running Yoast and considered adding the trailing slash, but:
-Most of the inbound links we have are to URLs with no slash
-The slash style seems a little dated in general-few sites use them these days.
I'd really love to just figure out how to solve the issue a little closer to the root.
-
Hi John,
It seems obvious, but why not go for a adding a trailing slash to every URL instead or removing it, would solve your issues at least.
-
Are you using the yoast SEO plugin? There is a setting under Advanced > Permalinks that forces a trailing slash onto URLs. I'd try looking at that first.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Should I use a canonical URL for images uploaded to a blog post in Wordpress?
Hi, I have a wordpress website that has articles/news posts witch contain imagery. I've noticed that in the Media Library, when you upload an image to a blog post it generates a new permalink ...article-name/article-image-01.jpg I have Yoast SEO plugin and have the option to set a canonical URL for this image. Should I point it back to the actual article? Thanks for any helpers with this.
Technical SEO | | Easigrass0 -
Bulk URL Removal in Webmaster Tools
One of Wordpress sites was hacked (for about 10 hours), and Google picked up 4000+ urls in the index. The site is fixed, but I'm stuck with all those urls in the index. All the urls of of the form: walkerorthodontics.com/index.php?online-payday-cash-loan.htmloncewe The only bulk removal option I could find was to remove an entire folder, but I can't do that, as it would only leave the homepage and kill off everything else. For some crazy reason, the removal tools doesn't support wildcards, so that obvious solution is right out. So, how do it get rid of 4000 results? And no, waiting around for them to 404 out of the index isn't an option.
Technical SEO | | MichaelGregory0 -
Redirect non slash to slash
Hello SEO gurus We have an issue here ( www.xyz.com.au) is having 200 responses www.xyz.com.au and www.xyz.com.au/ ( when i ran the crawl test i found this ) We have been advised to do a 301 from non slash to slash ( as our other pages are showing up with slash ) for the consistency we decided to go with this but our devs just couldnt do it. Error is - redirect loop and this site is a wordpress one Can anyone help us with this issue? Help is much appreciated.
Technical SEO | | Pack0 -
How do I redirect the Author archive page in Wordpress?
If you do a search for my name on Google, the first result is the author archive page of my Wordpress blog. I would like to redirect the author page to my "about me" page but cannot add a 301 as the author page is created dynamically in Wordpress. Anyone know how I can do this?
Technical SEO | | richdan0 -
Pages removed from Google index?
Hi All, I had around 2,300 pages in the google index until a week ago. The index removed a load and left me with 152 submitted, 152 indexed? I have just re-submitted my sitemap and will wait to see what happens. Any idea why it has done this? I have seen a drop in my rankings since. Thanks
Technical SEO | | TomLondon0 -
How to force a trailing slash after the domain name
My campaign analysis is predictably listing domain.com and domain.com/ as repeated content. I've searched and searched but cannot find a way to force a trailing slash on the end of the domain name unless there's a file or directory after it.. Is there a way to accomplish this using .htaccess
Technical SEO | | JollyBoy0 -
Sitefinity vs Wordpress
We're looking for a new CMS and out development company suggested Sitefinity. I've had great success with Wordpress. Is either system better. I love worpdress but have had no experience with Sitefinity. Thanks!
Technical SEO | | StandUpCubicles0 -
How do I add meta descriptions to Archives in Wordpress?
My most recent crawl returned a number of 'missing meta description' errors, and when I checked individual URLs, it turned out they were Wordpress Archived pages - for individual months and days (e.g. http:// .../2011/01). What's the best way to go about adding descriptions to these pages, if at all? Or should I have these pages not be indexed? I am using the All in One SEO plugin, so maybe there is an easy fix through this plugin, or it may be the cause of these errors? Any help is appreciated, thanks in advance! **EDIT After looking it up further, I have decided to use noindex for Archives, which should solve my problem right? Or is there a benefit to having those archived pages?
Technical SEO | | NetPicks0