Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Google Analytics Question - Impressions & Queries Up, Sessions Down
-
I'm working with a client who, according to the Google Query report, impressions and sessions are up since we've started work with them about 6 months ago, but Google sessions are down. In moz, we're seeing a gradual, but steady increase in search visibility specifically with Google. Note: this is all organic.
From when we started tracking queries, the first month we were tracking there were 43,581 impressions and 690 click throughs for the month. This past month there were 98,293 queries and 1015 clicks throughs for the month (granted not year over year data) - of these 1,015 clicks, 995 of them were from web. However, for those same time periods, sessions from Google are down over 30% - 1,750 vs. 1,189.
I'm not sure how to interpret this. I realize that clicks and sessions are not a straightforward comparison, but I would think that if clicks were up according to the query report that sessions would also be up. Is it that some of these clicks are bouncing and therefore not being tracked as a session? Is there a potential issue with how data is being tracked?
-
Hi Gyorgy,
Thanks for the info. I did see that article in my own searching, but will do the Screaming Frog analysis to make sure there is no issue with the Analytics code.
thanks again!
-
Hi Corporate_Communications! Did Gyorgy answer your question? If so, please mark his response as a "Good Answer." It'll give him some bonus MozPoints, and it helps us keep track of things.

Otherwise, what further questions do you have on this?
-
Firstly, use a website crawler (e.g. Screaming Frog) and check that every page on the website has Google Analytics tag, and also make sure it's implemented correctly.
Then I recommend reading this article, which explains the difference in more details: http://www.lunametrics.com/blog/2015/08/05/google-search-console-clicks-vs-google-analytics-sessions/
Three common reasons when there are more clicks than sessions (copied from the article):
- Non-HTML pages like PDFs or Word docs are not counted in Google Analytics but are counted as Google Search Console clicks
- The few users who do not have JavaScript enabled will go unnoticed by Google Analytics. (this can be SPAM bots too!)
- The few users that click on a search result but bounce off the site before the GA snippet can be loaded will also go unnoticed by GA. (This number may be higher if the code snippet takes an unusually long time to execute – if it is at the bottom of the source code, for example.)
Hope it helps.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Is there a way to filter all computers on a specific IPv6 network in Google Analytics?
Is there a quick way of filtering the IP addresses for all the computers on a network that's using IPv6? I want to filter out visits to our websites from the devices on our office network, but each computer (and phone and tablet) seems to have a different address. It _looks _like they all start the same way, though. One computer is xxxx:xxxx:xxxx:xxxx:aaaa:aaaa:aaaa:aaaa, another is xxxx:xxxx:xxxx:xxxx:bbbb:bbbb:bbbb:bbbb, my phone is xxxx:xxxx:xxxx:xxxx:cccc:cccc:cccc:cccc, etc. Does this mean that xxxx:xxxx:xxxx:xxxx is the address for our network as a whole, and I can just set up a Google Analytics filter for "IP addresses starting with..."? Or would doing that also filter out hits from, like, every visitor within a 20 mile radius of our office? If I need to simply put in the individual addresses for each and every device, I will. I'm just hoping it doesn't come to that. Thanks!
Reporting & Analytics | | BrianAlpert780 -
Direct traffic spam on Google Analytics: how can you identify and filter it?
One of my smaller clients noticed a huge jump in direct traffic visits last month. The bounce rate was around 97% so I'm pretty certain that most of the traffic was illegitimate. I know how to filter out spam referrals and organic keywords in Google Analytics. However I'm not sure what to do about direct traffic spam. Are there recommendations for filtering this out? Can I identify spam IP addresses?
Reporting & Analytics | | RosemaryB0 -
Google Analytics: Different stats for date range vs single month?
I've been scratching my head, chin, and you name it over this one. I have an advanced segment to remove bot traffic from my data. When I look at the Audience Overview data for a single month (let's say Aug). I am shown a session count. No problems here, however If I set the date range to (January - August). The august monthly stats is incorrect, much lower. What this means is that, if I export a CSV report from Jan-Aug, the data is wrong compared to individually recording a month. Anyone faced this? I've asked the question over at the Google Analytics technical section as well, but no answer P.S I even used the 'control the number of sessions used to calculate this report' tool but no luck.
Reporting & Analytics | | Bio-RadAbs0 -
How to remove unwanted dynamic parameters from a URL in Google Analytics
Hi, Would really appreciate some help with this. I have been experimenting with RegEx to achieve this but as I’ve never used it before am currently failing miserably. We have conversion pages i need to set goals for that are formatted as below: https://www.domain.co.uk//Application_Form/(S(ewhbqp5cki0mppuzukunkqno))/enterCardDetails.aspx I need to remove the (s(xxx)) section from the URL as rather than one pages i currently have thousands of unique URL's. What’s catching me out is that as it’s not a URL parameter I can’t discount and as half way through can’t just do head matches etc to /entercarddetails Help would be much appreciated. Thanks.
Reporting & Analytics | | Sarbs0 -
Setting Up Google Analytic with Sub Folder Sites
What is the best way of setting up Google Analytic for a website that has many sub folders? The main site is example.com and it has 40 sub folder sites like example.com/uk example.com/France etc etc Would it be advised to track a single domain in Google Analytic then create filters for the sub folder sites. Filters > Include traffic from > Sub directories Also with this method is it possible to view overall incoming website stats for everything? Previous experience would be great with this thanks 🙂
Reporting & Analytics | | daracreative0 -
Weird info from google analytics?
Hi Could anyone explain what these visits are in Google Analytics? Under traffic sources and organic I am seeing lots of entries with data like below. Any ideas what kind of traffic this is? Is it a bot and if so what is their purpose of it and is it recommended that you block it? Pages/Visit 1.00 Avg. Time on Site 00:00:00 % New Visits : 100% Bounce Rate: 100.00% Many Thanks
Reporting & Analytics | | ocelot0 -
Google Analytics: Difference Between Goal Conversions & Goal Completions
When using Google Analytics, what is the difference between total goal conversions and total goal completions? We have many goals set up in a lead generation environment. Therefore, the only element of conversion is submitted a lead and arriving on the "Thank You" page. THose thank you pages are tagged accordingly. When we run reports though, the number of "Total Goal Conversions" and "Total Goal Completions" never match up.
Reporting & Analytics | | eMagineSEO0 -
Google Analytics Admin account not allowing us to add other users?
Our Google Analytics Administrator account is not giving us access to the User Manager, and because of that we are unable to add users; have you ever ran in to a problem such as this, if so what was your solution. Thanks a Billion impressions, Vijay E2qE9.jpg
Reporting & Analytics | | vijayvasu0