Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
I need to whitelist the Google Analytics servers via IP Address. Any one know their server IPs?
-
Due to a walled garden situation, I need to input all the servers we should have access to via IP Address. We need to track the way our users are browsing within the garden, so I require all the IP addresses that Google Analytics would use. I tried googling it, but was not able to find any definitive answers.
Thank you in advance,
Heather
-
Indeed, if you want to whitelist a list of Google IPs, we'd be talking about a TON of IPs. To my knowledge, there doesn't seem to be a public list anywhere.
I'm afraid there is no good answer for your question.
Your best bet might be experimenting with an self-hosted Analytics package like Urchin.
-
Hi,
The reason we require the IP addresses is that we have all internet access completely shut down, so there is no way for our site to send out a call to Google Analytics each time a user loads the page unless the IP address of the google servers have been added to our whitelist, therefore allowing data out from our network to theirs.
I did a bunch of research after initially asking the question back in November and it apparently there are no specific IP ranges for just Google Analytics related servers (they are just part of the overall server farm). We would need to whitelist well over a 100,000 ip addresses based on the ranges I found.
Thank you,
Heather
-
Yes, I think we need this clarified as there are two things to be considered with Analytics - depending which method you want to use to verify your site you may need Googlebot to have access. There is another option in this case though - you could simply turn off the firewall, verify the site and then turn the firewall back on.
Of course Keri is quite right in that there is no need for crawlers to access the site for Analytics to work once verification has been completed as it uses javascript to send information from the browser.
The other question to be addressed though is "do you want any of the pages behind the firewall to be indexed?". If the answer is no, then the question will have been answered by the previous comments.
If the answer is yes, then you would need to whitelist the entire range to give googlebot(s) ongoing access.
Sha
-
Can you clarify if you're talking about Google Analytics, or about the google bot crawling the site itself?
-
I don't believe this is generally a problem, because traditionally googlebot doesn't use javascript that would trigger GA in the first place.
-
Hi Heather,
I think the closest you would get would be to run a Whois lookup for google.com, which will show you a series of IP address ranges that are associated with the domain.
While it will not give you the specific addresses for Analytics, it will also ensure that you are not blocking any of the various googlebots responsible for crawling, whatever job they do
Hope that helps,
Sha
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Attribution of conversions to payment gateway in Google Analytics
Hi all, We have been having a problem for a while now where most transactions are attributed to referrals from our payment gateway Sagepay. The issue started a couple of months ago, when we finally upgraded our website to https:// for logged in users and transactions. Before, when we were using http://, transactions were attributed to the correct channel. Even weirder, we upgraded 4 websites and only 2 of them have the issue now, the other two continue to attribute transactions correctly. I added Sagepay to the referral exclusion list which made no difference. Over the weekend, we upgraded to the global site tag and it seems to have improved somewhat, but yesterday 50% of transactions were still attributed to referral/sagepay. I am also seeing an odd issue, where for half of the transactions, the revenue and transaction are attributed to one channel, but the products (quantity) are attributed to another. One of the channels is always referral/sagepay and the other is the channel that the transaction should be attributed to. Has anyone seen this issue before? I'd appreciate any tips that might help us fix this issue. Thanks in advance!
Reporting & Analytics | | ViviCa10 -
Is there a way to filter all computers on a specific IPv6 network in Google Analytics?
Is there a quick way of filtering the IP addresses for all the computers on a network that's using IPv6? I want to filter out visits to our websites from the devices on our office network, but each computer (and phone and tablet) seems to have a different address. It _looks _like they all start the same way, though. One computer is xxxx:xxxx:xxxx:xxxx:aaaa:aaaa:aaaa:aaaa, another is xxxx:xxxx:xxxx:xxxx:bbbb:bbbb:bbbb:bbbb, my phone is xxxx:xxxx:xxxx:xxxx:cccc:cccc:cccc:cccc, etc. Does this mean that xxxx:xxxx:xxxx:xxxx is the address for our network as a whole, and I can just set up a Google Analytics filter for "IP addresses starting with..."? Or would doing that also filter out hits from, like, every visitor within a 20 mile radius of our office? If I need to simply put in the individual addresses for each and every device, I will. I'm just hoping it doesn't come to that. Thanks!
Reporting & Analytics | | BrianAlpert780 -
Google Analytics Goals - Button Tracking
Does anyone know if there is a really easy way to track a button in Google Analytics yourself? It seems that most button click goal setups involve some use of tricky code and I'm wondering if there is a much easier way to do this that will allow us to simply setup and track certain button clicks as goal conversions in Analytics. Your help here is much appreciated!
Reporting & Analytics | | Gavo0 -
Can you track two Google Analytics Accounts on one site?
If you have a site that had an old analytics account and then implemented a new one is it possible to run tracking code that records to both accounts without causing your site or data issues? We are doing this so we don't loose data at any point - ideally it wouldn't have been split between the two but making one redundant isn't an option. Ideally we would have merged the data from both accounts and had one - however the research we have done points to this not being a possibility - unless one of you guys knows different? It would be great if anyone has experience on any this.. Thanks
Reporting & Analytics | | ChrisAllbones0 -
Set Up of Goal Tracking with Google Analytics-$750 a Fair Price????
Greetings Moz Community! My firm operates commercial real estate website that contains 3-4 forms. Each form represents a goals. Google Analytics has been set up for years, but it does not track these form completions/goals properly. My SEO firm has offered to configure Goals on Google Analytics for $750. Is this a fair price? If the set up takes one hour, I am really over paying. But if this is a complex project that may take 7-9 hours the pricing seems OK. Also, the SEO firm will require an additional $750 in the future to set up event tracking. Is this excessive? I might add that my developer will need to add code to my web site. My SEO company has proven reliable and accurate. I can go to sleep at night knowing they are doing a good job. Where as my Argentinian developers really try their best, but perhaps because of the language barrier, they can make mistakes from time to time. I am willing to pay a premium to ensure that the job is done correctly domestically, however I don't appreciate over paying. Is the $750 payment for setting up Google Analytics reasonable assuming the job is done well??? Thanks,
Reporting & Analytics | | Kingalan1
Alan0 -
Google Analytics - Next Page Path is the Same URL?
Hey Everyone, I have a Google analytics question. I'm looking through a client's site and when I look at the next page path, I get the same URL as the next path. For example, on the homepage, the next page path I get is the homepage again? This happens for all URL's, is this an implementation error? Is there a way to fix this? Thanks!
Reporting & Analytics | | EvansHunt0 -
Whats 'Other' in Google Analytics (in Acquisition)
When i look in GA under Channels (under Acquisition) 'other' is listed What is 'other' ? I have been told its other unidentified channels as they did not allow 3rd party cookies or surfers were in anonymous/private mode. Other is usually organic traffic that couldn't be identified for the aformentioned reasons. This data is encrypted and available but it violates Google guidelines as they are not allowed to pass personal info//data to third parties so it is automatically filtered. But they are not 'Not Provided' (since that still shows under organic) but is usually/mainly some form of organic visits. Hence Seo can take credit for much of that traffic, is this correct ? Many Thanks
Reporting & Analytics | | Dan-Lawrence0 -
How to remove unwanted dynamic parameters from a URL in Google Analytics
Hi, Would really appreciate some help with this. I have been experimenting with RegEx to achieve this but as I’ve never used it before am currently failing miserably. We have conversion pages i need to set goals for that are formatted as below: https://www.domain.co.uk//Application_Form/(S(ewhbqp5cki0mppuzukunkqno))/enterCardDetails.aspx I need to remove the (s(xxx)) section from the URL as rather than one pages i currently have thousands of unique URL's. What’s catching me out is that as it’s not a URL parameter I can’t discount and as half way through can’t just do head matches etc to /entercarddetails Help would be much appreciated. Thanks.
Reporting & Analytics | | Sarbs0