Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
I need to whitelist the Google Analytics servers via IP Address. Any one know their server IPs?
-
Due to a walled garden situation, I need to input all the servers we should have access to via IP Address. We need to track the way our users are browsing within the garden, so I require all the IP addresses that Google Analytics would use. I tried googling it, but was not able to find any definitive answers.
Thank you in advance,
Heather
-
Indeed, if you want to whitelist a list of Google IPs, we'd be talking about a TON of IPs. To my knowledge, there doesn't seem to be a public list anywhere.
I'm afraid there is no good answer for your question.
Your best bet might be experimenting with an self-hosted Analytics package like Urchin.
-
Hi,
The reason we require the IP addresses is that we have all internet access completely shut down, so there is no way for our site to send out a call to Google Analytics each time a user loads the page unless the IP address of the google servers have been added to our whitelist, therefore allowing data out from our network to theirs.
I did a bunch of research after initially asking the question back in November and it apparently there are no specific IP ranges for just Google Analytics related servers (they are just part of the overall server farm). We would need to whitelist well over a 100,000 ip addresses based on the ranges I found.
Thank you,
Heather
-
Yes, I think we need this clarified as there are two things to be considered with Analytics - depending which method you want to use to verify your site you may need Googlebot to have access. There is another option in this case though - you could simply turn off the firewall, verify the site and then turn the firewall back on.
Of course Keri is quite right in that there is no need for crawlers to access the site for Analytics to work once verification has been completed as it uses javascript to send information from the browser.
The other question to be addressed though is "do you want any of the pages behind the firewall to be indexed?". If the answer is no, then the question will have been answered by the previous comments.
If the answer is yes, then you would need to whitelist the entire range to give googlebot(s) ongoing access.
Sha
-
Can you clarify if you're talking about Google Analytics, or about the google bot crawling the site itself?
-
I don't believe this is generally a problem, because traditionally googlebot doesn't use javascript that would trigger GA in the first place.
-
Hi Heather,
I think the closest you would get would be to run a Whois lookup for google.com, which will show you a series of IP address ranges that are associated with the domain.
While it will not give you the specific addresses for Analytics, it will also ensure that you are not blocking any of the various googlebots responsible for crawling, whatever job they do
Hope that helps,
Sha
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Whatstuffwherebot user agent messing up Google Analytics
Starting yesterday, Aug 26, 2020, I noticed a new bot crawling our site with user agent whatstuffwherebot. Google Analytics is counting these hits as human traffic, completely throwing off my numbers - yesterday, Analytics reported nearly triple my typical number of visitors. As of now, Search Console only shows data through Aug 25 so I don't know if Search Console is also affected. Is anybody else seeing something similar? Does anybody know what the whatstuffwherebot bot is? I don't get any results when I search on Google or Bing. For what it's worth, the traffic is coming from Columbus, OH, running over Amazon AWS via 278 different IP addresses so far. Also, WordFence (my WordPress security plugin) correctly identifies these hits as bot traffic.
Reporting & Analytics | | ahirai0 -
Is there a way to filter all computers on a specific IPv6 network in Google Analytics?
Is there a quick way of filtering the IP addresses for all the computers on a network that's using IPv6? I want to filter out visits to our websites from the devices on our office network, but each computer (and phone and tablet) seems to have a different address. It _looks _like they all start the same way, though. One computer is xxxx:xxxx:xxxx:xxxx:aaaa:aaaa:aaaa:aaaa, another is xxxx:xxxx:xxxx:xxxx:bbbb:bbbb:bbbb:bbbb, my phone is xxxx:xxxx:xxxx:xxxx:cccc:cccc:cccc:cccc, etc. Does this mean that xxxx:xxxx:xxxx:xxxx is the address for our network as a whole, and I can just set up a Google Analytics filter for "IP addresses starting with..."? Or would doing that also filter out hits from, like, every visitor within a 20 mile radius of our office? If I need to simply put in the individual addresses for each and every device, I will. I'm just hoping it doesn't come to that. Thanks!
Reporting & Analytics | | BrianAlpert780 -
Tracking time spent on a section of a website in Google Analytics
Hi, I've been asked by a client to track time spent or number of pages visited on a specific section of their website using Google Analytics but can't see how to do this. For example, they have a "golf" section within their site and want to measure how many people either visit 5 page or more within the golf section or spend at least 6 minutes browsing the various golf section pages. Can anyone advise how if this can be done, and if so, how I go about it. Thanks
Reporting & Analytics | | geckonm0 -
Google Analytics Showing Inflated Product Revenue
Hi- For the month of Feb on two of our sites we are seeing inflated product revenues. I have not seen this before and I am not having any luck searching for answers. Here is the issue: Product B sells for $159.95 For the month of Feb we sold 3 thus revenue should be ~$479.85 GA is showing Product B's revenue at $3,360.00 I read online that sometimes folks will bookmark the receipt page and that can cause this and we would need to put a catch in place for this but I am guessing this is not the case as it is happening on two sites. Please let me know if you have any questions.
Reporting & Analytics | | K2_Sports0 -
Google Analytics and DNS change
Our new alumni application is going be tested at domain uva.imodules.com . We are going to collect traffic data with a Google analytics account number UA-884652-XX. So going to uva.imodules.com/myPage.html would send its data to Google Analytics with that account number. Then when it is ready for production we are going to just change the domain name of the application and switch the DNS over to dardencommunity.darden.virginia.edu . So going to dardencommunity.darden.virginia.edu /myPage.html would send its data to Google Analtics with that SAME account number. Aside from having the testing domain data in the same profile are there any other issues/problems we may run into?
Reporting & Analytics | | Darden0 -
Localhost:4444 Showing Up in Google Analytics
Hello All, Lately in my Google Analytics account I have noticed a referral source labelled: localhost:4444 The number of visits is really high from this source, but I have no idea (no clue!) what it actually means. Can anyone shed some light on what this is about? Should I be creating some sort of filter to screen out this as a referral source (assuming it is not legitimate)? Many thanks in advance. Cheers!
Reporting & Analytics | | Robert-B0 -
How to remove unwanted dynamic parameters from a URL in Google Analytics
Hi, Would really appreciate some help with this. I have been experimenting with RegEx to achieve this but as I’ve never used it before am currently failing miserably. We have conversion pages i need to set goals for that are formatted as below: https://www.domain.co.uk//Application_Form/(S(ewhbqp5cki0mppuzukunkqno))/enterCardDetails.aspx I need to remove the (s(xxx)) section from the URL as rather than one pages i currently have thousands of unique URL's. What’s catching me out is that as it’s not a URL parameter I can’t discount and as half way through can’t just do head matches etc to /entercarddetails Help would be much appreciated. Thanks.
Reporting & Analytics | | Sarbs0 -
Why does Google Analytics think PPC traffic is organic?
I have a bastard of a problem... Google Analytics is incorrectly tracking PPC traffic as SEO which is screwing up all my reporting . I don't care for rankings, I care for actual SEO traffic and I can't be sure that what i am seeing is correct which is driving me nuts. Any ideas?
Reporting & Analytics | | Red_Mud_Rookie1