Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
KeyWord Density?
-
What is an acceptable density for a keyword? It's wise to push it as close to spam without sacrificing user experience, correct?
I read an article on SeoMoz (outdated I think) that mentioned 6%.
If it's a keyword phrase, do you have to make sure you don't go over the density level of a particular word in the phrase. If it's a three word phrase, do you have to not use any one word more than X% or just monitor the exact keyword.
-
In my understanding - Google is a machine that wants us to think that it is acting as a human being
In general - there is some human influence on their 'algos' but it's important to understand - it is still a machine! And most important is to clearly lied down - it is machine that constantly keeps upgraded and tweaked by humans.
I see where and why Joseph coming from and I see why he still is not satisfied with the answer. You know why? Because question is wrong for this community
Everyone here wants to do good for you Joseph! And that is why you are not getting direct answer regarding correct keyword density percentage. The truth is - this number is keeping changing constantly and whatever 'density' will you apply to your article it is - DANGEROUS! There is no exact magical number but there is a safe side that works for present moment.
And to answer you directly - do not cross 1.5 - 2.0 percentage at the moment. Think about this like that - If you will apply wrong keyword density to your article you will get fired from your job.
So, how to apply correct keyword density you are asking! - you see, you asking to guarantee you something that only Google can guarantee as there is no insight - what Google will implement next and how that will affect everyone here.
One golden rule applies for this though - keep constantly updating and changing your content! As far it is the best of the best of all ranking advices what I can give you because as far as it goes now - Whenever new content is published Google clearly and immediately recognizes, responds and communicates with you via changes of you ranking positions via what!? - via keyword density,placement,decoration,website structure, credibility,visibility and all this blah,blah,blah stuff
You see - keywords are still there!
So, sorry, but there is no magical and precise pill for this! That is why question was a bit wrong.
all the best,
Jungles
-
Google is placing less and less importance on keyword density.
As a general rule always have the keyword/phrase in the Title, summary and opening paragraph and enbedded in any images/videos attached. And include some variations of the key term throughout the content eg. using synonyms.
I would recommend sticking at around 3% anything more than that definitely looks spammy
A little bit 'old school' but a tool you can use is http://www.visiblepr.com
You just enter in your top 3 keywords/phases and copy and paste the text into the box and it will tell you the density.
As mentioned through Google will probably appreciate the synonyms throughout the content over high density keywords.
-
Keyword density is passe. Just make sure you have used the targeted keywords in the title and a couples of times in the body content. But no need to use them as it is. For say if you are writing on Web design NY, you do not need to use the phrase as it.
-
I believe the tools are focused on a minimum number of instances of the phrase and not the %. Keyword density as an important ranking factor is a myth.
Here are two great links that will help shine some light on the subject for you:
http://www.seomoz.org/blog/10-myths-that-scare-seos-but-shouldnt-whiteboard-friday http://www.seomoz.org/beginners-guide-to-seo/myths-and-misconceptions-about-search-engines
-
This is a common sense approach. There is an optimal %.
I can write endless content that has high value. My site targets local real estate. I could write a hundred pages with a high value to customers. I need to know the %. I could write 300 words at 6% phrase. I could write 1,000 words at 3% etc... No matter how much content I add, it will be high quality.
I appreciate the link to the tool; however, even the tool has to target a specific %. It has to have an objective concept in which it weighs by. I am certain it has a %.
A blog on SEOMOZ once said 6%. A local SEO told me that is high level spam.
-
You should always write content for users and not search engines. Trying to achieve a specific percentage of keyword density could do more harm than good if it messes up the natural flow of your content. Instead you should use the on-page optimization tool to make sure your following best practices. It will of course let you know if you should try and include a few more instances of your targeted keyword. Adding additional content sections to the page can sometimes help you find better places to work in your keywords, try adding testimonials, lists, pull out quotes or excerpts of the main content, etc. There's also data that suggests partial match and related terms can help influence your on page relevancy so be sure you're working in these types of terms as well.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
URL keyword separator best practice
Hello. Wanted to reach out see what the consensus is re-keyword separators So just taken on a new client and all their urls are structured like /buybbqpacks rather than buy-bbq-packs - my understanding is that it comes down to readability, which influences click through, rather than search impact on the keyword. So we usually advise on a hyphen, but the guy's going to have to change ALLOT of pages & setup redirects to change it all wasn't sure if it was worth it? Thanks! Stu
On-Page Optimization | Apr 28, 2017, 9:47 AM | bloomletsgrow0 -
My target keyword is "moringa powder" but my product title is "moringa ultimate original powder". Is this a problem?
The focus keyword is "moringa powder". The product title and default H1 tag is "moringa ultimate original powder". The url also has "moringa ultimate original powder". Yoast is saying the keyword does not appear in the url or any subheadings. So should I change the product title and url to Original Ultimate moringa powder or is having them separated ok? https://greenvirginproducts.com/product/moringa/150-gram-moringa-ultimate-original-powder/ Thanks
On-Page Optimization | Apr 25, 2016, 6:26 PM | Jeremy-Marion0 -
Exact keyword match for meta title and h1 what is best practice?
How exact should my meta titles and H1 one be compare to the keyword you wish to rank on. Eksample. When I do a research with google AdWords the keyword tool shows me: 260 monthly searches for house for rent Hua Hin 140 monthly searches for Hua Hin house for rent 70 monthly searches for House for rent in Hua Hin The first two includes the exact same 5 words while the last one includes the stopword "in". That google have different search volumens for these very smilair search queries tells me that small differences matters. So how does that effect the way i shoulf write my: a)meta titles b)H1 I feel I get better sentences often by reordering the keywords etc. “Top tips on how to rent house in Hua Hin” Instead of “Top tips if you want a house for rent in Hua Hin” Do you use stop words like “in” hua hin. (only used in 25% of the searches queries)? Also would it matter if i write a plural form of a keyword instead of a singular etc propeties and sted of property? My goal is to write easy to read and unique content but i feel i can make exact matches if required with out compromising to much.
On-Page Optimization | Mar 13, 2015, 8:14 PM | nm19770 -
Avoid Keyword Dilution
Hi
On-Page Optimization | Nov 25, 2013, 9:18 AM | ulefos
I am struggling with keyword dilution, and I don't understand what I need to do to change.I have read it but don't get it. This is the explanation - You want to target each keyword with a single page on your site, so modify the anchor text of this link so it is not an exact match. The only thing that I see is the title and the anchor text the same and the image alt also the same is that what the problem is here is the page I am trying to sort out for the keyword kiln dried logs.
Thank you0 -
Are there any SEO benefits changing the default home page filename (index.htm) to a keyword rich filename
II'm a newbie. I have a website using the default home page filename: index.htm. I have total control over the web server. I was wondering whether I can get any SEO improvements for my main keyword if I change the default filename with a filename that contains the main keyword, like our-main-product.htm (doing the 301 redirect and changing the server search order, of course)?
On-Page Optimization | May 16, 2013, 10:41 AM | Grafimart0 -
Target keywords on homepage or sub page?
Is it better to target main keywords on a site's homepage, or in a sub page. I would usually assume the homepage, but if the domain for the homepage doesn't include the keyword is it better to have a sub page with an exact match URL? For example we target the keyword "abc123" Is it better to optimise the homepage: brandname.com Or create a page to target it: brandname.com/abc123/ And leave the homepage to target brand keywords, but link to the "abc123" page. Whats the best option?
On-Page Optimization | Feb 7, 2013, 1:15 AM | timscullin0 -
Should you try to rank for misspelled keywords?
Hi there, 2 part question: Is it best practice to try to rank for misspelled keywords that bring in lots of traffic or should you instead just try to rank for the correct spelling of that keyword and hope that you rank better on the misspelling as an indirect result? E.G. The misspelled keyword "Hamilton island accomodation" is a common misspelling that brings in traffic but we have an "F" rank for that term (obviously because we spell accommodation correctly on our site). We don't want to misspell anything but are there techniques to rank better for misspellings that won't hurt content quality? The On-Page Optimization tool says that our website doesn't rank in the top 50 on Google Aus for "Accomodation Hamilton Island" or "Hamilton Island Accomodation" but when i do a manual search, we actually are the first result. Is this an error with the On-Page optimization tool? Thanks!
On-Page Optimization | Dec 14, 2011, 12:24 PM | HamiltonIsland0 -
How to avoid keyword stuffing on e-Commerce Category pages
Hi, I'm optimizing a large, consumer electronic e-commerce superstore. Based on client's choice of keywords, I'm using product category pages as my target urls. Because of the proprietary CMS structure, product names and titles, featured on my landing pages (product category pages) create a keyword overkill, affecting various ranking factors. For example, one of the target urls / landing pages, dedicated to a specific product category, mentions the keyword over 190 times because of so many product titles in the "body" section. Would inline "rel="canonical" help? If yes, what part of the website should it "canonize"? If rel="canonical" is not the answer, what strategies would you suggest? Thanks!
On-Page Optimization | Nov 22, 2011, 5:51 PM | dimanyc0