Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
H1 Tags on Volusion Product Pages
-
So I'm working with a client who has no heading tags on his site and I'm wondering if there is an ideal method to implementing these on the product pages specifically, as the wording I ideally want to specify is is the product title, which i can't really code with an H1.
Has anyone run into this issue? If so, what was your solution?
Also, how vital are these heading tags on the product pages, anyways?
If the Volusion SEO expert could chime in, that would be much appreciated.
Thanks everyone!
-
Hi Nathan,
Has Volusion implemented this change yet? Will They?
-
Hi Jason, the
concern will be addressed with the release of Volusion's new theme engine. I expect this to be available this year, perhaps Q3. Along with this concern, the entire Volusion interface will be modernized and the new framework will enable unprecedented optimization options across categories and products. More information will be available soon.
As for your 300+ pages of duplicate content, it's very unlikely this is an
issue. Have you tried entering one of your URLs into a free service like copyscape.com ? This could help you identify what content is duplicate. Furthermore, If you'd like to provide your store, I'll take a look and get back to you ASAP with a recommendation.
Regards,
Nathan Joynt
-
I just wanted to check in with this question and see if the latest versions of volusion now incorporate h1 automatically, or if i still need to go into the html on each page and add my h1's manually? Moz says i have over 300 pages of duplicate content, I think because there are no h1 tags with my new volusion store?
-
Hi Paul, thank you for your patience. And thank you everyone else as well. I did get this entered into product for 2014. I do not know currently exact timing, although I will keep you posted.
-
Any update on fixing this in Volusion? It seems so simple just to wrap the page title in H1 rather than having users go through thousands of product pages and manually adding H1 titles to the descriptions.
-
Hi Igor, yes you will have to do it manually for now. I am working with V13 product team on this.
Regards,
Nathan
-
Hi Nathan
Is it now implemented? or I need to do it manually?
Kind regards Igor
-
Nathan,
Thanks for your response. The domain name is www.Oransi.com and I did use Tamara's advice, which worked for the most part. Certain variables came into play that I wasn't expecting, but overall that did fix my issue. However, if you could indeed suggest to the V13 product team about using product names as H1s, I believe your clientele would benefit indeed.
Thanks to everyone who helped here.
-
Hello,
Yes, Tamara is correct with her suggestion to include the
within the Description 'HTML Editor' area. I can talk with the V13 product team as well about the ability to treat the product name as the
. I like to use actual merchant examples in my product optimization requests. Would you mind telling me the domain so I can include it in the story?
Kind regards,
Nathan Joynt
-
Ah Volusion. Yes, we've run into this issue. Unfortunately, you can't add an
around the logical spot for the product name (at the top of the page below the crumb trail) So what we've done, and had very good results from in long tail / product-based search results, is to repeat the product name (sometimes with a bit of a keyword tweak) as the leading data in the product description area - where you do have control over the HTML.
Here's an example: https://www.diigo.com/item/image/3y63p/5pnd?size=o
The CSS which styles the H1's was edited to match the product name display at the top of the page, for consistency.
In order to quickly implement this run of site for all products, we used the CONCAT function in Excel to append the tags, and generally used the "productname" value to populate the heading text, then appended the closing tag + the actual description, and then just inserted back into the db.
CAVEAT: If you're pulling a product feed back out of Volusion, you'll want to strip the HTML out of that description, in order to not get wonky behavior in the CSE's (comparison shopping engines).
Hope that helps - if not, and there's anything else I can add - please let me know.
Cheers!
BMT
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Is using a H1 tag in a logo image bad for SEO?
We have brand logos on certain pages that have H1 tags in them - the H1 text being the brand's name, as this is what we'd want the title of the page to be. The logos are at the top of the page instead of a written title. But is this the best option for SEO? Do search engines value H1 tags in images as highly as a standard H1 tag?Would it be better for SEO to add an alt tag to the logo and add a separate H1 tag on the page that's also the name of the brand?
On-Page Optimization | | DVLighting0 -
My website have h1 tags , but still crawlers can't find them?
crawlers can't crawl my meta description and h1 tags even when they are present.
On-Page Optimization | | Green_Beauty0 -
Is it better to keep a glossary or terms on one page or break it up into multiple pages?
We have a very large glossary of over 1000 industry terms on our site with links to reference material, embedded video, etc. Is it better for SEO purposes to keep this on one page or should we break it up into multiple pages, a different page for each letter for example? Thanks.
On-Page Optimization | | KenW0 -
Why are http and https pages showing different domain/page authorities?
My website www.aquatell.com was recently moved to the Shopify platform. We chose to use the http domain, because we didn't want to change too much, too quickly by moving to https. Only our shopping cart is using https protocol. We noticed however, that https versions of our non-cart pages were being indexed, so we created canonical tags to point the https version of a page to the http version. What's got me puzzled though, is when I use open site explorer to look at domain/page authority values, I get different scores for the http vs. https version. And the https version is always better. Example: http://www.aquatell.com DA = 21 and https://www.aquatell.com DA = 27. Can somebody please help me make sense of this? Thanks,
On-Page Optimization | | Aquatell1 -
Getting the Titles and Headings Right on Product Pages. Userbility vs SEO
Hey Mozzers, I am optimising a chaotic section of the site including many similar products. Writing unique content etc. The titles and urls were all over the place so my first job was to tidy them up so I could make some sense of the situation, especially as sometimes they didn't even match! I should point out were on Magento, so product name = Both the Heading and Title of the page, the meta title can be set separately. When i refer to title I mean both <title>and <h1></strong><br /><br />Before they existed as such<br />URL: domain.com/200-x-0-5-g-rs-232-balance.html<br />TItle: PC-1234 200 x 0.5g x 0.3 RS-232 Balance<br /><br />This format was (Product Code, Capacities, Resolutions, Accuracy, Product Title)<br /><br />The issue was all 60 products in a page followed this format. Navigating through the page was a nightmare and was just a jumble of numbers and highly confusing even to me who learnt what they all mean, especially when you had 8 products from the same range you got presented with<br /><br />APC-1234 200 x 0.5g x 0.3 RS-232 Balance<br />APC-1235 500 x 1g x 0.3 RS-232 Balance<br />APC-1236 1000 x 2g x 0.3 RS-232 Balance<br />APC-1238 5000 x 10g x 0.3 RS-232 Balance<br />APC-1239 10000 x 15g x 0.3 RS-232 Balance<br />APC-1210 20000 x 25g x 0.3 RS-232 Balance<br />APC-1211 50000 x 50g x 0.3 RS-232 Balance</p> <p>I changed them to something more user friendly.<br /><br />URL: domain.com/200g-precision-balance.html<br />Title: 200g Precision Balance<br /><br />This has seen the following benefits<br />- URL is now clear and means something to the user<br />- Product titles are easy to navigate and the page is more pleasing to the eye<br />- The jumble of numbers in the title are now all labelled and shown below each product listing in bullet point so the user can see the basic spec of a product without having to decipher any titles<br /><br />Upon reflection I has a couple of concerns I was hoping you could discuss, I am wondering if I have made the titles too simple.<br />1) I have no product code in the title<br />We have our own products manufactured and sell existing brands with their own product codes. Some of these can be lengthy. Adding them makes them hard to the eye and the page looked cramped.<br /><br />The codes are listed beneath each product title on category pages and on a list on the actual product page, but no where in the titles. <br /><br />2)None of our products have a brand listed in the title<br />None of the products on the site had brand names in anything but the images when i started and as such it snuck under my radar. But should i pre-fix all titles with a brand name?<br /><br />Should </p> <p>URL: domain.com/200g-precision-balance.html<br />Title: 200g Precision Balance</p> <p>become</p> <p>URL: domain.com/BRAND1-200g-precision-balance.html<br />Title: BRAND1 200g Precision Balance<br /><br />My instinct tells me to change things to include brands as its useful to the customer and should have an SEO benefit, but to leave out product codes as they are accessible to the customer where they are now and dont make things messy and unreadable.<br /><br />As always, thanks for the input!</p></title>
On-Page Optimization | | ATP0 -
How do I fix duplicate page issue on Shopify with duplicate products because of collections.
I'm working with a new client with a site built on Shopify. Most of their products appear in four collections. This is creating a duplicate content challenge for us. Can anyone suggest specific code to add to resolve this problem. I'm also interested in other ideas solutions, such as "don't use collections" if that's the best approach. I appreciate your insights. Thank you!
On-Page Optimization | | quiltedkoala0 -
Add content as blog post or to product pages?
Hi, We have around 40 products which we can produce plenty of in-depth and detailed "how to"-type pieces of content for. Our current plan is to produce a "How to make" style post for each as a long blog post, then link that to the product page. There's probably half a dozen or more of these kind of blog posts that we could do for each product. The reason why we planned on doing it like this is that it would give us plenty of extra pages (blog posts) on their own URL which can be indexed and rank for long tail keywords, but also that we can mention these posts in our newsletter. It'd give people a new page full of specific content that they can read instead of us having to say "Hey! We've updated our product page for X!", which seems a little pointless. Most of the products we sell don't get very many searches themselves; Most get a couple dozen and the odd few get 100-300 each, while one gets more than 2,000 per month. The products don't get many searches as it's a relatively unknown niche when it comes to details, but searches for the "categories" these products are in are very well known (Some broad terms that cover the niche get more than 30,000+ searches a month in the UK and 100,000+ world wide) [Exact].
On-Page Optimization | | azu25
Regarding the one product with more than 2,000 searches; This keyword is both the name of the product and also a name for the category page. Many of our competitors have just one of these products, whereas we're one of the first to have more than 6 variations of this product, thus the category page is acting like our other product pages and the information you would usually find on our product pages, is on the category page for just this product. I'm still leaning towards creating each piece of content as it's own blog post which links to the product pages, while the product pages link to the relevant blog posts, but i'm starting to think that it may be be better to put all the content on the product pages themselves). The only problem with this is that it cuts out on more than 200 very indepth and long blog posts (which due to the amount of content, videos and potentially dozens of high resolution images may slow down the loading of the product pages). From what I can see, here are the pros and cons: Pro (For blog posts):
1. More than 200 blog posts (potentially 1000+ words each with dozens of photos and potentially a video)..
2. More pages to crawl, index and rank..
3. More pages to post on social media..
4. Able to comment about the posts in the newsletter - Sounds more unique than "We've just updated this product page"..
5. Commenting is available on blog posts, whereas it is not on product pages..
6. So much information could slow down the loading of product pages significantly..
7. Some products are very similar (ie, the same product but "better quality" - Difficult to explain without giving the niche away, which i'd prefer not to do ATM) and this would mean the same content isn't on multiple pages.
8. By my understanding, this would be better for Google Authorship/Publishership.. Con (Against blog posts. For extended product pages):
1. Customers have all information in one place and don't have to click on a "Related Blog posts" tab..
2. More content means better ability to rank for product related keywords (All but a few receive very few searches per month, but the niche is exploding at an amazing rate at the moment)..
3. Very little chance of a blog post out-ranking the related product page for keywords.. I've run out of ideas for the 'Con' side of things, but that's why I'd like opinions from someone here if possible. I'd really appreciate any and all input, Thanks! [EDIT]:
I should add that there will be a small "How to make" style section on product pages anyway, which covers the most common step by step instructions. In the content we planned for blog posts, we'd explore the regular method in greater detail and several other methods in good detail. Our products can be "made" in several different ways which each result in a unique end result (some people may prefer it one way than another, so we want to cover every possible method), effectively meaning that there's an almost unlimited amount of content we could write.
In fact, you could probably think of the blog posts as more of "an ultimate guide to X" instead of simply "How to X"...0 -
Is it ok to use the H1 tag for bullet points?
Our search results page doesn't have a typical H1 tag because adding a true header would take up space unnecessarily. Therefore, we've assigned the h1 tag to be the breadcrumb. As filters are applied, the breadcrumb grows to include these filters. This breadcrumb is coded as bullet points, even though they're not the typical style of bullet points. Here's a screenshot: http://screencast.com/t/AjGC9iAYR3 For example, the breadcrumb: Home >> NYC Social Media Classes >> Adult >> Manhattan is currently coded as: | |
On-Page Optimization | | mevseo
| | * class="first"><a <span="">href</a><a <span="">="</a>/">Home |
| | * <a <span="">href</a><a <span="">="</a>/nyc/classes/social-media/age-adults/neighborhood-manhattan" class="Selected">Search results |
| | |
| | |
| | id="cat_social-media" type="checkbox" checked onclick="setCategory('social-media')" /> |
| | # style="font-size: 12px; display: inline;">NYC Social Media Classes |
| | <label <span="">for</label>="cat_social-media"> |
| | |
| | |
| | |
| | <nobr>id="age_adults" type="checkbox" checked onclick="setAge('adults')" /><label <span="">for</label>="age_adults">Adults</nobr> |
| | |
| | |
| | <nobr>id="nbhd_manhattan" type="checkbox" checked onclick="setNeighborhood('manhattan')" /><label <span="">for</label>="nbhd_manhattan">Manhattan</nobr> |
| | |
| | | Right now that H1 tag just relates to 'NYC Social media classes', but we'd like to expand it to include both 'Manhattan' & 'Adults' - would that be ok? And if so, would it be better to put the tag before and after the tag?0