Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Is using dots in URL path really a problem?
-
we have a couple of pages displaying a dot in the URL path like
domain.com/mr.smith/widget-mr.smith
It displays fine in chrome, firefox and IE and for the user it may actually look better than replacing it by _ or -.
Did this ever cause problems to anybody?
Any statement from google about it?
Should I change existing URLs?If so, which other characters can I use in the URL instead of underscore and dash, since in our system dash and underscore are already used for rewriting other characters.
Thanks
-
Hi Andrews,
While the difference between dashes and underscores use to be a big issue a few years back its something that seems to hold minimal merit now. The two can be used rather interchangeably without any major impact. This was phased out around the same time as exact-match-domain value was as far too many people were abusing the long-tail dash page method.
-
While I've never come across this exact problem before I can share with you one my mantras that applies here:
"If a system (browser, search engine, etc) needs to perform a data re-write, you aren't accessible enough."
Google loves accessibility. It always wants the user to be able to easily access information and it wants it's spiders to be able to easily index and categorize the information. When accessibility options such as javascript versioning or if a site is using flash or not have an impact then it would only logically follow that more obvious structural access issues do come into effect.
From a technology stand point I can tell you that "." is not traditionally used in the scope of a URL/file structure as it a reserved character and therefore your structure is being re-written to display those. Much like international domains like the chinese internationalized domain name extension .中国 (which is basically a visual re-encode of the unicode: xn--fiqs8s) For the sake of accessibility, proper structure formatting and system practicality you should avoid using non-standard characters such as the . in your url
-
Hi!
As far as I know, this really isn't a huge problem (could be mistaken). I guess it depends...
In regards to readability, I prefer using dashes (-), as they tend to be easier to read. Underscores may be mistaken for a space). Here's what Matt Cutts had to say about this some years ago: http://www.mattcutts.com/blog/whitehat-seo-tips-for-bloggers/ (and http://www.mattcutts.com/blog/dashes-vs-underscores/)
I believe I have read that Google and other search engines read URLs like this when looking for semantic meanings:
- /this-is-part-of-a-website-address = this is part of a website address
- /this_is_part_of_a_website_address = thisispartofawebsiteaddress
At least that used to be the case...It could be changed now.
In your example, I would not obsess too much about it, as it gives perfect semantic meaning. Have you considered removing special characters, instead of replacing them with a "-" ?
Hope this helps.
Best regards,
Anders
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Help with facet URLs in Magento
Hi Guys, Wondering if I can get some technical help here... We have our site britishbraces.co.uk , built in Magento. As per eCommerce sites, we have paginated pages throughout. These have rel=next/prev implemented but not correctly ( as it is not in is it in ) - this fix is in process. Our canonicals are currently incorrect as far as I believe, as even when content is filtered, the canonical takes you back to the first page URL. For example, http://www.britishbraces.co.uk/braces/x-style.html?ajaxcatalog=true&brand=380&max=51.19&min=31.19 Canonical to... http://www.britishbraces.co.uk/braces/x-style.html Which I understand to be incorrect. As I want the coloured filtered pages to be indexed ( due to search volume for colour related queries ), but I don't want the price filtered pages to be indexed - I am unsure how to implement the solution? As I understand, because rel=next/prev implemented ( with no View All page ), the rel=canonical is not necessary as Google understands page 1 is the first page in the series. Therefore, once a user has filtered by colour, there should then be a canonical pointing to the coloured filter URL? ( e.g. /product/black ) But when a user filters by price, there should be noindex on those URLs ? Or can this be blocked in robots.txt prior? My head is a little confused here and I know we have an issue because our amount of indexed pages is increasing day by day but to no solution of the facet urls. Can anybody help - apologies in advance if I have confused the matter. Thanks
Intermediate & Advanced SEO | | HappyJackJr0 -
Replace dynamic paramenter URLs with static Landing Page URL - faceted navigation
Hi there, got a quick question regarding faceted navigation. If a specific filter (facet) seems to be quite popular for visitors. Does it make sense to replace a dynamic URL e.x http://www.domain.com/pants.html?a_type=239 by a static, more SEO friendly URL e.x http://www.domain.com/pants/levis-pants.html by creating a proper landing page for it. I know, that it is nearly impossible to replace all variations of this parameter URLs by static ones but does it generally make sense to do this for the most popular facets choose by visitors. Or does this cause any issues? Any help is much appreciated. Thanks a lot in advance
Intermediate & Advanced SEO | | ennovators0 -
Attack of the dummy urls -- what to do?
It occurs to me that a malicious program could set up thousands of links to dummy pages on a website: www.mysite.com/dynamicpage/dummy123 www.mysite.com/dynamicpage/dummy456 etc.. How is this normally handled? Does a developer have to look at all the parameters to see if they are valid and if not, automatically create a 301 redirect or 404 not found? This requires a table lookup of acceptable url parameters for all new visitors. I was thinking that bad url names would be rare so it would be ok to just stop the program with a message, until I realized someone could intentionally set up links to non existent pages on a site.
Intermediate & Advanced SEO | | friendoffood1 -
Problem with redirects in coldfusion
How to redirect pages in cold fusion? If using ColdFusion and modrewrite, the URL will never be redirected from ModRewrite.
Intermediate & Advanced SEO | | alexkatalkin0 -
If I own a .com url and also have the same url with .net, .info, .org, will I want to point them to the .com IP address?
I have a domain, for example, mydomain.com and I purchased mydomain.net, mydomain.info, and mydomain.org. Should I point the host @ to the IP where the .com is hosted in wpengine? I am not doing anything with the .org, .info, .net domains. I simply purchased them to prevent competitors from buying the domains.
Intermediate & Advanced SEO | | djlittman0 -
Canonical URLs and Sitemaps
We are using canonical link tags for product pages in a scenario where the URLs on the site contain category names, and the canonical URL points to a URL which does not contain the category names. So, the product page on the site is like www.example.com/clothes/skirts/skater-skirt-12345, and also like www.example.com/sale/clearance/skater-skirt-12345 in another category. And on both of these pages, the canonical link tag references a 3rd URL like www.example.com/skater-skirt-12345. This 3rd URL, used in the canonical link tag is a valid page, and displays the same content as the other two versions, but there are no actual links to this generic version anywhere on the site (nor external). Questions: 1. Does the generic URL referenced in the canonical link also need to be included as on-page links somewhere in the crawled navigation of the site, or is it okay to be just a valid URL not linked anywhere except for the canonical tags? 2. In our sitemap, is it okay to reference the non-canonical URLs, or does the sitemap have to reference only the canonical URL? In our case, the sitemap points to yet a 3rd variation of the URL, like www.example.com/product.jsp?productID=12345. This page retrieves the same content as the others, and includes a canonical link tag back to www.example.com/skater-skirt-12345. Is this a valid approach, or should we revise the sitemap to point to either the category-specific links or the canonical links?
Intermediate & Advanced SEO | | 379seo0 -
How do you implement dynamic SEO-friendly URLs using Ajax without using hashbangs?
We're building a new website platform and are using Ajax as the method for allowing users to select from filters. We want to dynamically insert elements into the URL as the filters are selected so that search engines will index multiple combinations of filters. We're struggling to see how this is possible using symfony framework. We've used www.gizmodo.com as an example of how to achieve SEO and user-friendly URLs but this is only an example of achieving this for static content. We would prefer to go down a route that didn't involve hashbangs if possible. Does anyone have any experience using hashbangs and how it affected their site? Any advice on the above would be gratefully received.
Intermediate & Advanced SEO | | Sayers1 -
URL Length or Exact Breadcrumb Navigation URL? What's More Important
Basically my question is as follows, what's better: www.romancingdiamonds.com/gemstone-rings/amethyst-rings/purple-amethyst-ring-14k-white-gold (this would fully match the breadcrumbs). or www.romancingdiamonds.com/amethyst-rings/purple-amethyst-ring-14k-white-gold (cutting out the first level folder to keep the url shorter and the important keywords are closer to the root domain). In this question http://www.seomoz.org/qa/discuss/37982/url-length-vs-url-keywords I was consulted to drop a folder in my url because it may be to long. That's why I'm hesitant to keep the bradcrumb structure the same. To the best of your knowldege do you think it's best to drop a folder in the URL to keep it shorter and sweeter, or to have a longer URL and have it match the breadcrumb structure? Please advise, Shawn
Intermediate & Advanced SEO | | Romancing0