Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Removing URL Parentheses in HTACCESS
-
Im reworking a website for a client, and their current URLs have parentheses. I'd like to get rid of these, but individual 301 redirects in htaccess is not practical, since the parentheses are located in many URLs.
Does anyone know an HTACCESS rule that will simply remove URL parantheses as a 301 redirect?
-
I thought I'd come back and re-post the solution in case this shows up in SERPs or anyone other Moz members are looking for this answer (courtesy Noah Wooden of Izoox). HTACCESS:
<ifmodule mod_rewrite.c="">RewriteEngine On
# Strip set of opening-closing parenthesis from URL and 301 redirect.
RewriteCond %{REQUEST_URI} [()]+
RewriteRule ^(.)[(]+([^)])[)]+(.*)$ /$1$2$3 [R=301,L]</ifmodule>Remember to put this in the proper 'order' on your htaccess file if you are doing any other redirecting. The code above 301 redirects URLs with parentheses into the exact same URL minus the parentheses.
-
thanks Merlin - Ill have their programmer try this.
-
Ok,
having looked at the site I would recommend that the changes are done via server side. I assume the htaccess file is been used to to parse category/subcategory/productname to a controller. Within that controller if the product is found clean the product name with the function below test it against the given url and do a 301 redirect to the cleaned name if they do not match
function clean_name($string) { $non_acceptable = '#[^-a-zA-Z0-9 ]#'; $string = preg_replace($non_acceptable, '', $string); $string = trim($string); $string = preg_replace('#[-_ ]+#', '-', $string); return $string; }
-
Hi Merlin - thank you.
Here is an example:
www.domain-name.com/category1/subcategory/product-name-details-(model-number)-length
needs to change to:
www.domain-name.com/category1/subcategory/product-name-details-model-number-length
Any suggestion would be great. Their programmer is having trouble creating a rule.
Thanks in advance
-
I have 1 or two suggestions. Could you provide an example of the URL? This will allow me to give a more definiive solution
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Using 410 To Remove URLs Starting With Same Word
We had a spam injection a few months ago. We successfully cleaned up the site and resubmitted to google. I recently received a notification showing a spike in 404 errors. All of the URLS have a common word at the beginning injected via the spam: sitename.com/mono
Technical SEO | | vikasnwu
sitename.com/mono.php?buy-good-essays
sitename.com/mono.php?professional-paper-writer There's about 100 total URLS with the same syntax with the word "mono" in them. Based on my research, it seems that it would be best to serve a 410. I wanted to know what the line of HTACCESS code would be to do that in bulk for any URL that has the word "mono" after the sitename.com/0 -
Backlinks that go to a redirected URL
Hey guys, just wondering, my client has 3 websites, 2 of 3 will be closed down and the domains will be permanently redirected to the 1 primary domain - however they have some high quality backlinks pointing the domains that will be redirected. How does this effective SEO? Domain One (primary - getting redesign and rebuilt) - not many backlinks
Technical SEO | | thinkLukeSEO
Domain Two (will redirect to Domain One) - has quality backlinks
Domain Three (will redirect to Domain One) - has quality backlinks When the new website is launched on Domain One I will contact the backlink providers and request they update their URL - i assume that would be the best.0 -
URL - Well Formed or Malformed
Hi Mozzers, I've been mulling over whether my URLs could benefit a little SEO tweaking. I'd be grateful for your opinion. For instance, we've a product, a vintage (second hand), red Chanel bag. At the moment the URL is: www.vintageheirloom.com/vintage-chanel-bags/2.55-bags/red-2.55-classic-double-flap-bag-1362483150 Broken down... vintage-chanel-bags = this is the main product category, i.e. vintage chanel bags 2.55-bags = is a sub category of the main category above. They are vintage Chanel 2.55 bags, but I've not included 'vintage' again. 2.55 bags are a type of Chanel bag. red-2.55-classic-double-flap-bag = this is the product, the bag **1362483150 **= this is a unique id, to prevent the possibility of duplicate URLs As you no doubt can see we target, in particular, the phrase **vintage. **The actual bag / product title is: Vintage Chanel Red 2.55 classic double flap bag 10” / 25cm With this in mind, would I be better off trying to match the product name with the end of the URL as closely as possible? So a close match below would involve not repeating 'chanel' again: www.vintageheirloom.com/chanel-bags/2.55-bags/vintage-red-2.55-classic-double-flap-bag or an exact match below would involve repeating 'chanel': www.vintageheirloom.com/chanel-bags/2.55-bags/vintage-chanel-red-2.55-classic-double-flap-bag This may open up more flexibility to experiment with product terms like second hand, preowned etc. Maybe this is a bad idea as I'm removing the phrase 'vintage' from the main category. But this logical extension of this looks like keyword stuffing !! www.vintageheirloom.com/vintage-chanel-bags/vintage-2.55-bags/vintage-chanel-red-2.55-classic-double-flap-bag Maybe this is over analyzing, but I doubt it? Thanks for looking. Kevin
Technical SEO | | well-its-1-louder0 -
Removing Media from Wordpress
I've run the seomoz on page report and found an interesting issue. I'm using wordpress and it seems that every picture I add to my articles seem to be added as separate pages to the site. I'm having to go to each and every picture and creating a meta tag and description to it. I still get duplicate content issues with the same. On my Disqus system, I get the same pictures added just as a page or article would look like. What can I do to avoid this?
Technical SEO | | emasaa0 -
Pages removed from Google index?
Hi All, I had around 2,300 pages in the google index until a week ago. The index removed a load and left me with 152 submitted, 152 indexed? I have just re-submitted my sitemap and will wait to see what happens. Any idea why it has done this? I have seen a drop in my rankings since. Thanks
Technical SEO | | TomLondon0 -
Ok to Put a Decimal in a URL?
I'm in the process of creating new product specific URLs for my company. Some of our products have decimals in them for their names as a unit of measurement. For example - .The URL for a 050" widget would be something like: http://www.example.com/product/category/.050-inch-widget My question is - Can I use a decimal in the URL without ticking off the search engines, and/or causing any other unexpected effects?
Technical SEO | | CodyWheeler0 -
Urls with or without .html ending
Hello, Can anyone show me some authority info on wheher links are better with or without a .html ending? Thanks is advance
Technical SEO | | sesertin0 -
Duplicate canonical URLs in WordPress
Hi everyone, I'm driving myself insane trying to figure this one out and am hoping someone has more technical chops than I do. Here's the situation... I'm getting duplicate canonical tags on my pages and posts, one is inside of the WordPress SEO (plugin) commented section, and the other is elsewhere in the header. I am running the latest version of WordPress 3.1.3 and the Genesis framework. After doing some testing and adding the following filters to my functions.php: <code>remove_action('wp_head', 'genesis_canonical'); remove_action('wp_head', 'rel_canonical');</code> ... what I get is this: With the plugin active + NO "remove action" - duplicate canonical tags
Technical SEO | | robertdempsey
With the plugin disabled + NO "remove action" - a single canonical tag
With the plugin disabled + A "remove action" - no canonical tag I have tried using only one of these remove_actions at a time, and then combining them both. Regardless, as long as I have the plugin active I get duplicate canonical tags. Is this a bug in the plugin, perhaps somehow enabling the canonical functionality of WordPress? Thanks for your help everyone. Robert Dempsey0