Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Problem with Yoast not seeing any of this website's text/content
-
Hi,
My client has a new WordPress site http://www.londonavsolutions.co.uk/ and they have installed the Yoast Premium SEO plug-in.
They are having issues with getting the lights to go green and the main problem is that on most pages Yoast does not see any words/content – although there are plenty of words on the pages. Other tools can see the words, however Yoast is struggling to find any and gives the following message:-
Bad SEO score. The text contains 0 words. This is far below the recommended minimum of 300 words. Add more content that is relevant for the topic.
Readability - You have far too little content. Please add some content to enable a good analysis.
They have contacted the website developer who says that there is nothing wrong, but they are frustrated that they cannot use the Yoast tools themselves because of this issue, plus Yoast are offering no support with the issue.
I hope that one of you guys has seen this problem before, or can spot a problem with the way the site has been built and can perhaps shed some light on the problem. I didn't build the site myself so won't be offended if you spot problems with it.
Thanks in advance,
Ben
-
If they do really want to know, they could just copy the text into a standard content box. It'll tell you for that content if it's good/bad etc.
-
Thanks for trying to help - the issue is with the website, so a reinstall won't help.
-
Thanks for your advice - this time Yoast have responded with the following:-
"By default, the Yoast SEO Premium plugin only detects texts contained in the standard WordPress content box. Are your contents written somewhere else?"
Therefore it looks like the issue is with the site as I thought, and it won't be resolved, thanks anyway.
-
Hi Ben,
Its just issue with configuration, i reckon to uninstal the plugin and reinstall it again. This issue will be fixed. In relation to the issue with word count, this is also due to misconfiugration.
I hope this will help
-
I would try and message them on every way that is listed here: https://kb.yoast.com/kb/support/
This is just a guess, but are you using a page builder (drag and drop) by any chance?
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Google has deindexed a page it thinks is set to 'noindex', but is in fact still set to 'index'
A page on our WordPress powered website has had an error message thrown up in GSC to say it is included in the sitemap but set to 'noindex'. The page has also been removed from Google's search results. Page is https://www.onlinemortgageadvisor.co.uk/bad-credit-mortgages/how-to-get-a-mortgage-with-bad-credit/ Looking at the page code, plus using Screaming Frog and Ahrefs crawlers, the page is very clearly still set to 'index'. The SEO plugin we use has not been changed to 'noindex' the page. I have asked for it to be reindexed via GSC but I'm concerned why Google thinks this page was asked to be noindexed. Can anyone help with this one? Has anyone seen this before, been hit with this recently, got any advice...?
Technical SEO | | d.bird0 -
If I'm using a compressed sitemap (sitemap.xml.gz) that's the URL that gets submitted to webmaster tools, correct?
I just want to verify that if a compressed sitemap file is being used, then the URL that gets submitted to Google, Bing, etc and the URL that's used in the robots.txt indicates that it's a compressed file. For example, "sitemap.xml.gz" -- thanks!
Technical SEO | | jgresalfi0 -
Problems with WooCommerce Product Attribute Filter URL's
I am running a WordPress/WooCommerce site for a client, and Moz is picking up some issues with URL's generated from WooCommerce product attribute filters. For example: ..co.uk/womens-prescription-glasses/?filter_gender=mens&filter_style=full-rim&filter_shape=oval How do I get Google to ignore these filters?
Technical SEO | | SushiUK
I am running Yoast Premium, but not sure if this can solve the issue? Product categories are canonicalised to the root category URL. Any suggestions very gratefully appreciated. Thanks Bob0 -
URL Structure On Site - Currently it's domain/product-name NOT domain/category/product name is this bad?
I have a eCommerce site and the site structure is domain/product-name rather than domain/product-category/product-name Do you think this will have a negative impact SEO Wise? I have seen that some of my individual product pages do get better rankings than my categories.
Technical SEO | | the-gate-films0 -
Strange URL's for client's site
We just picked up a new client and I've been doing some digging around on their site. They have quite the wide variety of URL's that make for a rather confusing experience. One of the milder examples is their "About" page. Normally I would expect something along the lines of: www.website.com/about I see: www.website.com/default.asp?Page=About I'm typically a graphic designer and know basically nothing about code, but I just assume this has something funky to do with how their website was constructed. I'm assuming this isn't particularly SEO friendly, but it doesn't seem too bad. Until I got to another section of their site. It's a section that logically should look like: www.website.com/training/public-seminars It's: www.website.com/default.asp?Page=MT&Area=Seminars&Sub=MRM Now that's nonsensical to me! Normally if a client has terrible URL's, I'd say let's do some redirects, but I guess I'm a little intimidated by these. Do the URL's have to be structured like this for some reason? Am I missing some important area of coding here? However, the most bizarre example is a link back to their website from yellowpages.com. Where normally I would expect it to lead to their homepage, I get this bizarre-looking thing: http://website1-px.rtrk.com/?utm_source=ReachLocal&utm_medium=PPC&utm_campaign=AssetManagement&reference_id=15&publisher=yellowpages&placement=ypwebsitemip&action_target=listing_website And as you browse through the site, that strange domain stays. For example the About page is now: http://website1-px.rtrk.com/default.asp?Page=About I would try to google this but I have no idea where to even start! What is going on with these links? Will we be able to fix them to something presentable without breaking their website?
Technical SEO | | everestagency0 -
Do I use /es/, /mx/ or /es-mx/ for my Spanish site for Mexico only
I currently have the Spanish version of my site under myurl.com/es/ When I was at Pubcon in Vegas last year a panel reviewed my site and said the Spanish version should be in /mx/ rather than /es/ since es is for Spain only and my site is for Mexico only. Today while trying to find information on the web I found /es-mx/ as a possibility. I am changing my site and was planning to change to /mx/ but want confirmation on the correct way to do this. Does anyone have a link to Google documentation that will tell me for sure what to use here? The documentation I read led me to the /es/ but I cannot find that now.
Technical SEO | | RoxBrock0 -
Why is Google's cache preview showing different version of webpage (i.e. not displaying content)
My URL is: http://www.fslocal.comRecently, we discovered Google's cached snapshots of our business listings look different from what's displayed to users. The main issue? Our content isn't displayed in cached results (although while the content isn't visible on the front-end of cached pages, the text can be found when you view the page source of that cached result).These listings are structured so everything is coded and contained within 1 page (e.g. http://www.fslocal.com/toronto/auto-vault-canada/). But even though the URL stays the same, we've created separate "pages" of content (e.g. "About," "Additional Info," "Contact," etc.) for each listing, and only 1 "page" of content will ever be displayed to the user at a time. This is controlled by JavaScript and using display:none in CSS. Why do our cached results look different? Why would our content not show up in Google's cache preview, even though the text can be found in the page source? Does it have to do with the way we're using display:none? Are there negative SEO effects with regards to how we're using it (i.e. we're employing it strictly for aesthetics, but is it possible Google thinks we're trying to hide text)? Google's Technical Guidelines recommends against using "fancy features such as JavaScript, cookies, session IDs, frames, DHTML, or Flash." If we were to separate those business listing "pages" into actual separate URLs (e.g. http://www.fslocal.com/toronto/auto-vault-canada/contact/ would be the "Contact" page), and employ static HTML code instead of complicated JavaScript, would that solve the problem? Any insight would be greatly appreciated.Thanks!
Technical SEO | | fslocal0 -
Should I Parent/Child my Website Pages (need help with terminology too)
Hello I have a website that I am trying to SEO optimise.
Technical SEO | | NikitaG
The current structure of the site is that all pages are linked directly after the domain:
example: www.domain.com**/page01** www.domain.com**/page02** The website is however logically organised in the following form:
www.domain.com**/page01/page02** Sometimes the parenting goes to 3 levels: (please help me with the right term here) Domain
↳ Page001
↳ Page002
↳Page003 My question is: should keep the current structure, or is it worth the effort to re-link the website in a parented way. Are there any benefites to one or the other, and could you point to some video tutorials or documentation to read. BqoDAsx.jpg DMMIC5o.jpg0