Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Blocking URL's with specific parameters from Googlebot
-
Hi,
I've discovered that Googlebot's are voting on products listed on our website and as a result are creating negative ratings by placing votes from 1 to 5 for every product. The voting function is handled using Javascript, as shown below, and the script prevents multiple votes so most products end up with a vote of 1, which translates to "poor".
How do I go about using robots.txt to block a URL with specific parameters only? I'm worried that I might end up blocking the whole product listing, which would result in de-listing from Google and the loss of many highly ranked pages.
DON'T want to block:
http://www.mysite.com/product.php?productid=1234
WANT to block:
http://www.mysite.com/product.php?mode=vote&productid=1234&vote=2
Javacript button code:
onclick="javascript: document.voteform.submit();"
Thanks in advance for any advice given.
Regards,
Asim -
Good to hear, I am glad you perservered
-
Tried them all now and all come back with "Success"... May be I'll post in the WMT Forum and see if anyone can shed light on this problem. Thanks for your help Alan, it's much appreciated.
-
Yes correct, did you try the other formats?
-
Tried "Fetch as Googlebot" in Diagnostics and it came back as "Success" so I guess the robots.txt directive is not working. I'm assuming it should have reported a failure message when attempting to fetch a URL containing "?mode=vote".
-
Wrong place, go to diagnostics, then look for fetch as googlebot
-
I added "Disallow: /mode=vote" to the robots.txt file and also manually entered it on Crawler Access page, then clicked "Test" and no errors were reported. The WMT page states that robots.txt was last downloaded 16 hours ago so I'll wait until it picks the file up again and then check for any errors. Hopefully that will do trick
-
Try this in robots.txt, I did not think that Google allows wild cards but i just read that they do.
Disallow: /*mode=vote*orDisallow: /*mode=voteorDisallow: /*modeThen try in Google WMT to read with googlebot to see if it works.The first in the list seems right to me, but I have seen others do it the other ways. -
Thanks for the reply. The site was developed using PHP, mySQL and Javascript. I was hoping there was a way to do it without getting programmers involved...
-
dont think you are going to do it in robots.txt, rather do a 301 from mode=vote to non mode vote.
If you dont know how to put this into practise, tell me what your site is built with, if it is ASP.NET, i will show you how to impliment, if not someone else should be able to help.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
What's the best way to handle product filter URLs?
I've been researching and can't find a clear cut answer. Imagine you have a product category page e.g. domain/jeans You've a lot of options as to how to filter the results domain/jeans?=ladies,skinny,pink,10 or domain/jeans/ladies-skinny-pink-10 or domain/jeans/ladies/skinny?=pink,10 And in this how do you handle titles, breadcrumbs etc. Is the a way you prefer to handle filters and why do you do it that way? I'm trying to make my mind up as some very big names handle this differently e.g. http://www.next.co.uk/shop/gender-women-category-jeans/colour-pink-fit-skinny-size-10r VS https://www.matalan.co.uk/womens/shop-by-category/jeans?utf8=✓&[facet_filter][meta.tertiary_category][Skinny]=on&[facet_filter][variants.meta.size][Size+10]=on&[facet_filter][meta.master_colour][Midwash]=on&[facet_filter][min_current_price][gte]=6.0&[facet_filter][min_current_price][lte]=18.0&per=36&sort=
Technical SEO | | RodneyRiley0 -
Spam URL'S in search results
We built a new website for a client. When I do 'site:clientswebsite.com' in Google it shows some of the real, recently submitted pages. But it also shows many pages of spam url results, like this 'clientswebsite.com/gockumamaso/22753.htm' - all of which then go to the sites 404 page. They have page titles and meta descriptions in Chinese or Japanese too. Some of the urls are of real pages, and link to the correct page, despite having the same Chinese page titles and descriptions in the SERPS. When I went to remove all the spammy urls in Search Console (it only allowed me to temporarily hide them), a whole load of new ones popped up in the SERPS after a day or two. The site files itself are all fine, with no errors in the server logs. All the usual stuff...robots.txt, sitemap etc seems ok and the proper pages have all been requested for indexing and are slowly appearing. The spammy ones continue though. What is going on and how can I fix it?
Technical SEO | | Digital-Murph0 -
SERP result (URL) doesn't change after a 301
A couple of months ago there was a result in Google for our branded search term which wasn't the 'official' URL, actually the result shown in the SERP was www.mycompany-ip.nl. We've applied a 301 redirect of this URL to the 'official' URL which is a subdomain: department.mycompany.nl. From Google the redirect is obviously working, but up until now, I don't see Google replacing the incorrect URL by the correct URL. I am wondering what to do to make the result correct. André
Technical SEO | | ConclusionDigital0 -
New theme adds ?v=1d20b5ff1ee9 to all URL's as part of cache. How does this affect SEO
New theme I am working in ads ?v=1d20b5ff1ee9 to every URL. Theme developer says its a server setting issue. GoDaddy support says its part of cache an becoming prevalent in new themes. How does this impact SEO?
Technical SEO | | DML-Tampa0 -
Some URLs were not accessible to Googlebot due to an HTTP status error.
Hello I'm a seo newbie and some help from the community here would be greatly appreciated. I have submitted the sitemap of my website in google webmasters tools and now I got this warning: "When we tested a sample of the URLs from your Sitemap, we found that some URLs were not accessible to Googlebot due to an HTTP status error. All accessible URLs will still be submitted." How do I fix this? What should I do? Many thanks in advance.
Technical SEO | | GoldenRanking140 -
How Does Dynamic Content for a Specific URL Impact SEO?
Example URL: http://www.sja.ca/English/Community-Services/Pages/Therapy Dog Services/default.aspx The above page is generated dynamically depending on what province the visitor visits from. For example, a visitor from BC would see something quite different than a visitor from Nova Scotia; the intent is that the information shown should be relevant to the user of that province. How does this effect SEO? How (or from what location) does Googlebot decide to crawl the page? I have considered a subdirectory for each province, though that comes with its challenges as well. One such challenge is duplicate content when different provinces may have the same information for some pages. Any suggestions for this?
Technical SEO | | ey_sja0 -
Ecommerce website: Product page setup & SKU's
I manage an E-commerce website and we are looking to make some changes to our product pages to try and optimise them for search purposes and to try and improve the customer buying experience. This is where my head starts to hurt! Now, let's say I am selling a T shirt that comes in 4 sizes and 6 different colours. At the moment my website would have 24 products, each with pretty much the same content (maybe differing references to the colour & size). My idea is to change this and have 1 main product page for the T-shirt, but to have 24 product SKU's/variations that exist to give the exact product details. Some different ways I have been considering to do this: a) have drop-down fields on the product page that ask the customer to select their Tshirt size and colour. The image & price then changes on the page. b) All product 24 product SKUs sre listed under the main product with the 'Add to Cart' open next to each one. Each one would be clickable so a page it its own right. Would I need to set up a canonical links for each SKU that point to the top level product page? I'm obviously looking to minimise duplicate content but Im not exactly sure on how to set this up - its a big decision so I need to be 100% clear before signing off on anything. . Any other tips on how to do this or examples of good e-commerce websites that use product SKus well? Kind regards Tom
Technical SEO | | DHS_SH0 -
Does 'framing' a website create duplicate content?
Something I have not come across before, but hope others here are able offer advice based on experience: A client has independently created a series of mini-sites, aimed at targeting specific locations. The tactic has worked very well and they have achieved a large amount of well targeted traffic as a result. Each mini-site is different but then in the nav, if you want to view prices or go to the booking page, that then links to what at first appears to be their main site. However, you then notice that the URL is actually situated on the mini-site. What they have done is 'framed' the main site so that it appears exactly the same even when navigating through this exact replica site. Checking the code, there is almost nothing there - in fact there is actually no content at all. Below the head, there is a piece of code: <frameset rows="*" framespacing=0 frameborder=0> <frame src="[http://www.example.com](view-source:http://www.yellowskips.com/)" frameborder=0 marginwidth=0 marginheight=0> <noframes>Your browser does not support frames. Click [here](http://www.example.com) to view.noframes> frameset> Given that main site content does not appear to show in the source code, do we have an issue with duplicate content? This issue is that these 'referrals' are showing in Analytics, despite the fact that the code does not appear in the source, which is slightly confusing for me. They have done this without consultation and I'm very concerned that this could potentially be creating duplicate content of their ENTIRE main site on dozens of mini-sites. I should also add that there are no links to the mini-sites from the main site, so if you guys advise that this is creating duplicate content, I would not be worried about creating a link-wheel if I advise them to link directly to the main site rather than the framed pages. Thanks!
Technical SEO | | RiceMedia0