Blocking URL's with specific parameters from Googlebot
-
Hi,
I've discovered that Googlebot's are voting on products listed on our website and as a result are creating negative ratings by placing votes from 1 to 5 for every product. The voting function is handled using Javascript, as shown below, and the script prevents multiple votes so most products end up with a vote of 1, which translates to "poor".
How do I go about using robots.txt to block a URL with specific parameters only? I'm worried that I might end up blocking the whole product listing, which would result in de-listing from Google and the loss of many highly ranked pages.
DON'T want to block:
http://www.mysite.com/product.php?productid=1234
WANT to block:
http://www.mysite.com/product.php?mode=vote&productid=1234&vote=2
Javacript button code:
onclick="javascript: document.voteform.submit();"
Thanks in advance for any advice given.
Regards,
Asim -
Good to hear, I am glad you perservered
-
Tried them all now and all come back with "Success"... May be I'll post in the WMT Forum and see if anyone can shed light on this problem. Thanks for your help Alan, it's much appreciated.
-
Yes correct, did you try the other formats?
-
Tried "Fetch as Googlebot" in Diagnostics and it came back as "Success" so I guess the robots.txt directive is not working. I'm assuming it should have reported a failure message when attempting to fetch a URL containing "?mode=vote".
-
Wrong place, go to diagnostics, then look for fetch as googlebot
-
I added "Disallow: /mode=vote" to the robots.txt file and also manually entered it on Crawler Access page, then clicked "Test" and no errors were reported. The WMT page states that robots.txt was last downloaded 16 hours ago so I'll wait until it picks the file up again and then check for any errors. Hopefully that will do trick
-
Try this in robots.txt, I did not think that Google allows wild cards but i just read that they do.
Disallow: /*mode=vote*orDisallow: /*mode=voteorDisallow: /*modeThen try in Google WMT to read with googlebot to see if it works.The first in the list seems right to me, but I have seen others do it the other ways. -
Thanks for the reply. The site was developed using PHP, mySQL and Javascript. I was hoping there was a way to do it without getting programmers involved...
-
dont think you are going to do it in robots.txt, rather do a 301 from mode=vote to non mode vote.
If you dont know how to put this into practise, tell me what your site is built with, if it is ASP.NET, i will show you how to impliment, if not someone else should be able to help.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Content Based on User's IP Address
Hello, A client wants us to create a page on two different sites (www.brandA.com/content and www.brandB.com/content) with similar content and serve up specific content to users based on their IP addresses. The idea is that once a user gets to the page, the content would slightly change (mainly contact information and headers) based on their location. The problem I am seeing with this is that both brandA and brandB would be different Urls so there is a chance if their both optimized for the similar terms then they would both rank and crowd up the search results (duplicate content). Have you seen something similar? What are your thoughts and/or potential solutions? Also, do you know of any sites that are currently doing something similar?
Technical SEO | | Rauxa0 -
To integrate a blog tool onto site - or build a blog solution - what's better for SEO?
Currently looking at adding a blog to our company site subdirectory and wanted to know if there was a SEO distinction between the following methods: Integrating a bolt-on blog tool with the site to create the blog VS. just using the current site infrastructure to build blog functionality. What's better for SEO? (and if tool integration is the overwhelming response - which tool?). Cheers.
Technical SEO | | Oxfordcomma0 -
Using a Feedburner RSS link in your blog's header tag
It was suggested in Quick Sprout's Advanced SEO guide that it's good form to place your Feedburner RSS link into the header tag of your blog. Anyone know if this needs to be done for every page header of the blog, or just the home/main/index page? Thanks
Technical SEO | | Martin_S0 -
Found a Typo in URL, what's the best practice to fix it?
Wordpress 3.4, Yoast, Multisite The URL is supposed to be "www.myexample.com/great-site" but I just found that it's "www.myexample.com/gre-atsite" It is a relatively new site but we already pointed several internal links to "www.myexample.com/gre-atsite" What's the best practice to correct this? Which option is more desirable? 1.Creating a new page I found that Yoast has "301 redirect" option in the Advanced tap Can I just create a new page(exact same page) and put noindex, nofollow and redirect it to http://www.myexample.com/great-site OR 2. htacess redirect rule simply change the URL to http://www.myexample.com/great-site and update it, and add Options +FollowSymLinks RewriteEngine On
Technical SEO | | joony2008
RewriteCond %{HTTP_HOST} ^http://www.myexample.com/gre-atsite$ [NC]
RewriteRule ^(.*)$ http://www.myexample.com/great-site$1 [R=301,L]0 -
What's the issue?
Hi, We have a client who dropped in the rankings (initially from bottom of the first page to page to page 3, and now page 5) for a single keyword (their most important one - targeted on their homepage) back in the middle of March. So far, we've found that the issue isn't the following: Keyword stuffing on the page External anchor text pointing to the page Internal anchor text pointing to the page In addition to the above, the drop didn't coincide with panda or penguin. Any other ideas as to what could cause such a drop for a single keyword (other related rankings haven't moved). We're starting to think that this may just have been another small change in the algorithm but it seems like too big of a drop in a short space of time for that to be the case. Any thoughts would be much appreciated! Thanks.
Technical SEO | | jasarrow0 -
Url's don't want to show up in google. Please help?
Hi Mozfans 🙂 I'm doing a sitescan for a new client. http://www.vacatures.tuinbouw.nl/ It's a dutch jobsite. Now the problem is here: The url http://www.vacatures.tuinbouw.nl/vacatures/ is in google.
Technical SEO | | MaartenvandenBos
On the same page there are jobs (scroll down) with a followed link.
To a url like this: http://www.vacatures.tuinbouw.nl/vacatures/722/productie+medewerker+paprika+teelt/ The problem is that the second url don't show up in google. When i try to make a sitemap with Gsitecrawler the second url isn't in de sitemap.. :S What am i doing wrong? Thanks!0 -
Domain Transfer Process / Bulk 301's Using IIS
Hi guys - I am getting ready to do a complete domain transfer from one domain to another completely different domain for a client due to a branding/name change. 2 things - first, I wanted to lay out a summary of my process and see if everyone agrees that its a good approach, and second, my client is using IIS, so I wanted to see if anyone out there knows a bulk tool that can be used to implement 301's on the hundreds of pages that the site contains? I have found the process to redirect each individual page, but over hundreds its a daunting task to look at. The nice thing about the domain transfer is that it is going to be a literal 1:1 transfer, with the only things changing being the logo and the name mentions. Everything else is going to stay exactly the same, for the most part. I will use dummy domain names in the explanation to keep things easy to follow: www.old-domain.com and www.new-domain.com. The client's existing home page has a 5/10 GPR, so of course, transferring Mojo is very important. The process: Clean up existing site 404's, duplicate tags and titles, etc. (good time to clean house). Create identical domain structure tree, changing all URL's (for instance) from www.old-domain.com/freestuff to www.newdomain.com/freestuff. Push several pages to a dev environment to test (dev.new-domain.com). Also, replace all instances of old brand name (images and text) with new brand name. Set up 301 redirects (here is where my IIS question comes in below). Each page will be set up to redirect to the new permanent destination with a 301. TEST a few. Choose lowest traffic time of week (from analytics data) to make the transfer ALL AT ONCE, including pushing new content live to the server for www.new-domain.com and implementing the 301's. As opposed to moving over parts of the site in chunks, moving the site over in one swoop avoids potential duplicate content issues, since the content on the new domain is essentially exactly the same as the old domain. Of course, all of the steps so far would apply to the existing sub-domains as well, IE video.new-domain.com. Check for errors and problems with resolution issues. Check again. Check again. Write to (as many as possible) link partners and inform them of new domain and ask links to be switched (for existing links) and updated (for future links) to the new domain. Even though 301's will redirect link juice, the actual link to the new domain page without the redirect is preferred. Track rank of targeted keywords, overall domain importance and GPR over time to ensure that you re-establish your Mojo quickly. That's it! Ok, so everyone, please give me your feedback on that process!! Secondly, as you can see in the middle of that process, the "implement 301's" section seems easier said than done, especially when you are redirecting each page individually (would take days). So, the question here is, does anyone know of a way to implement bulk 301's for each individual page using IIS? From what I understand, in an Apache environment .htaccess can be used, but I really have not been able to find any info regarding how to do this in bulk using IIS. Any help here would be GREATLY APPRECIATED!!
Technical SEO | | Bandicoot0 -
Parameter handling (where to find all parameters to handle)?
Google recently said they updated their parameter handling, but I was wondering what is the best way to know all of the parameters that need "handling"? Will Google Webmaster find them? Should the company know based on what is on their site? Thanks!
Technical SEO | | nicole.healthline0