Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Blocking URL's with specific parameters from Googlebot
-
Hi,
I've discovered that Googlebot's are voting on products listed on our website and as a result are creating negative ratings by placing votes from 1 to 5 for every product. The voting function is handled using Javascript, as shown below, and the script prevents multiple votes so most products end up with a vote of 1, which translates to "poor".
How do I go about using robots.txt to block a URL with specific parameters only? I'm worried that I might end up blocking the whole product listing, which would result in de-listing from Google and the loss of many highly ranked pages.
DON'T want to block:
http://www.mysite.com/product.php?productid=1234
WANT to block:
http://www.mysite.com/product.php?mode=vote&productid=1234&vote=2
Javacript button code:
onclick="javascript: document.voteform.submit();"
Thanks in advance for any advice given.
Regards,
Asim -
Good to hear, I am glad you perservered
-
Tried them all now and all come back with "Success"... May be I'll post in the WMT Forum and see if anyone can shed light on this problem. Thanks for your help Alan, it's much appreciated.
-
Yes correct, did you try the other formats?
-
Tried "Fetch as Googlebot" in Diagnostics and it came back as "Success" so I guess the robots.txt directive is not working. I'm assuming it should have reported a failure message when attempting to fetch a URL containing "?mode=vote".
-
Wrong place, go to diagnostics, then look for fetch as googlebot
-
I added "Disallow: /mode=vote" to the robots.txt file and also manually entered it on Crawler Access page, then clicked "Test" and no errors were reported. The WMT page states that robots.txt was last downloaded 16 hours ago so I'll wait until it picks the file up again and then check for any errors. Hopefully that will do trick
-
Try this in robots.txt, I did not think that Google allows wild cards but i just read that they do.
Disallow: /*mode=vote*orDisallow: /*mode=voteorDisallow: /*modeThen try in Google WMT to read with googlebot to see if it works.The first in the list seems right to me, but I have seen others do it the other ways. -
Thanks for the reply. The site was developed using PHP, mySQL and Javascript. I was hoping there was a way to do it without getting programmers involved...
-
dont think you are going to do it in robots.txt, rather do a 301 from mode=vote to non mode vote.
If you dont know how to put this into practise, tell me what your site is built with, if it is ASP.NET, i will show you how to impliment, if not someone else should be able to help.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Are image pages considered 'thin' content pages?
I am currently doing a site audit. The total number of pages on the website are around 400... 187 of them are image pages and coming up as 'zero' word count in Screaming Frog report. I needed to know if they will be considered 'thin' content by search engines? Should I include them as an issue? An answer would be most appreciated.
Technical SEO | | MTalhaImtiaz0 -
How Does Dynamic Content for a Specific URL Impact SEO?
Example URL: http://www.sja.ca/English/Community-Services/Pages/Therapy Dog Services/default.aspx The above page is generated dynamically depending on what province the visitor visits from. For example, a visitor from BC would see something quite different than a visitor from Nova Scotia; the intent is that the information shown should be relevant to the user of that province. How does this effect SEO? How (or from what location) does Googlebot decide to crawl the page? I have considered a subdirectory for each province, though that comes with its challenges as well. One such challenge is duplicate content when different provinces may have the same information for some pages. Any suggestions for this?
Technical SEO | | ey_sja0 -
Blocked URL parameters can still be crawled and indexed by google?
Hy guys, I have two questions and one might be a dumb question but there it goes. I just want to be sure that I understand: IF I tell webmaster tools to ignore an URL Parameter, will google still index and rank my url? IS it ok if I don't append in the url structure the brand filter?, will I still rank for that brand? Thanks, PS: ok 3 questions :)...
Technical SEO | | catalinmoraru0 -
Correct linking to the /index of a site and subfolders: what's the best practice? link to: domain.com/ or domain.com/index.html ?
Dear all, starting with my .htaccess file: RewriteEngine On
Technical SEO | | inlinear
RewriteCond %{HTTP_HOST} ^www.inlinear.com$ [NC]
RewriteRule ^(.*)$ http://inlinear.com/$1 [R=301,L] RewriteCond %{THE_REQUEST} ^./index.html
RewriteRule ^(.)index.html$ http://inlinear.com/ [R=301,L] 1. I redirect all URL-requests with www. to the non www-version...
2. all requests with "index.html" will be redirected to "domain.com/" My questions are: A) When linking from a page to my frontpage (home) the best practice is?: "http://domain.com/" the best and NOT: "http://domain.com/index.php" B) When linking to the index of a subfolder "http://domain.com/products/index.php" I should link also to: "http://domain.com/products/" and not put also the index.php..., right? C) When I define the canonical ULR, should I also define it just: "http://domain.com/products/" or in this case I should link to the definite file: "http://domain.com/products**/index.php**" Is A) B) the best practice? and C) ? Thanks for all replies! 🙂
Holger0 -
Google insists robots.txt is blocking... but it isn't.
I recently launched a new website. During development, I'd enabled the option in WordPress to prevent search engines from indexing the site. When the site went public (over 24 hours ago), I cleared that option. At that point, I added a specific robots.txt file that only disallowed a couple directories of files. You can view the robots.txt at http://photogeardeals.com/robots.txt Google (via Webmaster tools) is insisting that my robots.txt file contains a "Disallow: /" on line 2 and that it's preventing Google from indexing the site and preventing me from submitting a sitemap. These errors are showing both in the sitemap section of Webmaster tools as well as the Blocked URLs section. Bing's webmaster tools are able to read the site and sitemap just fine. Any idea why Google insists I'm disallowing everything even after telling it to re-fetch?
Technical SEO | | ahockley0 -
Best Practices for adding Dynamic URL's to XML Sitemap
Hi Guys, I'm working on an ecommerce website with all the product pages using dynamic URL's (we also have a few static pages but there is no issue with them). The products are updated on the site every couple of hours (because we sell out or the special offer expires) and as a result I keep seeing heaps of 404 errors in Google Webmaster tools and am trying to avoid this (if possible). I have already created an XML sitemap for the static pages and am now looking at incorporating the dynamic product pages but am not sure what is the best approach. The URL structure for the products are as follows: http://www.xyz.com/products/product1-is-really-cool
Technical SEO | | seekjobs
http://www.xyz.com/products/product2-is-even-cooler
http://www.xyz.com/products/product3-is-the-coolest Here are 2 approaches I was considering: 1. To just include the dynamic product URLS within the same sitemap as the static URLs using just the following http://www.xyz.com/products/ - This is so spiders have access to the folder the products are in and I don't have to create an automated sitemap for all product OR 2. Create a separate automated sitemap that updates when ever a product is updated and include the change frequency to be hourly - This is so spiders always have as close to be up to date sitemap when they crawl the sitemap I look forward to hearing your thoughts, opinions, suggestions and/or previous experiences with this. Thanks heaps, LW0 -
Found a Typo in URL, what's the best practice to fix it?
Wordpress 3.4, Yoast, Multisite The URL is supposed to be "www.myexample.com/great-site" but I just found that it's "www.myexample.com/gre-atsite" It is a relatively new site but we already pointed several internal links to "www.myexample.com/gre-atsite" What's the best practice to correct this? Which option is more desirable? 1.Creating a new page I found that Yoast has "301 redirect" option in the Advanced tap Can I just create a new page(exact same page) and put noindex, nofollow and redirect it to http://www.myexample.com/great-site OR 2. htacess redirect rule simply change the URL to http://www.myexample.com/great-site and update it, and add Options +FollowSymLinks RewriteEngine On
Technical SEO | | joony2008
RewriteCond %{HTTP_HOST} ^http://www.myexample.com/gre-atsite$ [NC]
RewriteRule ^(.*)$ http://www.myexample.com/great-site$1 [R=301,L]0 -
Does 'framing' a website create duplicate content?
Something I have not come across before, but hope others here are able offer advice based on experience: A client has independently created a series of mini-sites, aimed at targeting specific locations. The tactic has worked very well and they have achieved a large amount of well targeted traffic as a result. Each mini-site is different but then in the nav, if you want to view prices or go to the booking page, that then links to what at first appears to be their main site. However, you then notice that the URL is actually situated on the mini-site. What they have done is 'framed' the main site so that it appears exactly the same even when navigating through this exact replica site. Checking the code, there is almost nothing there - in fact there is actually no content at all. Below the head, there is a piece of code: <frameset rows="*" framespacing=0 frameborder=0> <frame src="[http://www.example.com](view-source:http://www.yellowskips.com/)" frameborder=0 marginwidth=0 marginheight=0> <noframes>Your browser does not support frames. Click [here](http://www.example.com) to view.noframes> frameset> Given that main site content does not appear to show in the source code, do we have an issue with duplicate content? This issue is that these 'referrals' are showing in Analytics, despite the fact that the code does not appear in the source, which is slightly confusing for me. They have done this without consultation and I'm very concerned that this could potentially be creating duplicate content of their ENTIRE main site on dozens of mini-sites. I should also add that there are no links to the mini-sites from the main site, so if you guys advise that this is creating duplicate content, I would not be worried about creating a link-wheel if I advise them to link directly to the main site rather than the framed pages. Thanks!
Technical SEO | | RiceMedia0