Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Blocking URL's with specific parameters from Googlebot
-
Hi,
I've discovered that Googlebot's are voting on products listed on our website and as a result are creating negative ratings by placing votes from 1 to 5 for every product. The voting function is handled using Javascript, as shown below, and the script prevents multiple votes so most products end up with a vote of 1, which translates to "poor".
How do I go about using robots.txt to block a URL with specific parameters only? I'm worried that I might end up blocking the whole product listing, which would result in de-listing from Google and the loss of many highly ranked pages.
DON'T want to block:
http://www.mysite.com/product.php?productid=1234
WANT to block:
http://www.mysite.com/product.php?mode=vote&productid=1234&vote=2
Javacript button code:
onclick="javascript: document.voteform.submit();"
Thanks in advance for any advice given.
Regards,
Asim -
Good to hear, I am glad you perservered
-
Tried them all now and all come back with "Success"... May be I'll post in the WMT Forum and see if anyone can shed light on this problem. Thanks for your help Alan, it's much appreciated.
-
Yes correct, did you try the other formats?
-
Tried "Fetch as Googlebot" in Diagnostics and it came back as "Success" so I guess the robots.txt directive is not working. I'm assuming it should have reported a failure message when attempting to fetch a URL containing "?mode=vote".
-
Wrong place, go to diagnostics, then look for fetch as googlebot
-
I added "Disallow: /mode=vote" to the robots.txt file and also manually entered it on Crawler Access page, then clicked "Test" and no errors were reported. The WMT page states that robots.txt was last downloaded 16 hours ago so I'll wait until it picks the file up again and then check for any errors. Hopefully that will do trick
-
Try this in robots.txt, I did not think that Google allows wild cards but i just read that they do.
Disallow: /*mode=vote*orDisallow: /*mode=voteorDisallow: /*modeThen try in Google WMT to read with googlebot to see if it works.The first in the list seems right to me, but I have seen others do it the other ways. -
Thanks for the reply. The site was developed using PHP, mySQL and Javascript. I was hoping there was a way to do it without getting programmers involved...
-
dont think you are going to do it in robots.txt, rather do a 301 from mode=vote to non mode vote.
If you dont know how to put this into practise, tell me what your site is built with, if it is ASP.NET, i will show you how to impliment, if not someone else should be able to help.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
My Website's Home Page is Missing on Google SERP
Hi All, I have a WordPress website which has about 10-12 pages in total. When I search for the brand name on Google Search, the home page URL isn't appearing on the result pages while the rest of the pages are appearing. There're no issues with the canonicalization or meta titles/descriptions as such. What could possibly the reason behind this aberration? Looking forward to your advice! Cheers
Technical SEO | | ugorayan0 -
Problem with Yoast not seeing any of this website's text/content
Hi, My client has a new WordPress site http://www.londonavsolutions.co.uk/ and they have installed the Yoast Premium SEO plug-in. They are having issues with getting the lights to go green and the main problem is that on most pages Yoast does not see any words/content – although there are plenty of words on the pages. Other tools can see the words, however Yoast is struggling to find any and gives the following message:- Bad SEO score. The text contains 0 words. This is far below the recommended minimum of 300 words. Add more content that is relevant for the topic. Readability - You have far too little content. Please add some content to enable a good analysis. They have contacted the website developer who says that there is nothing wrong, but they are frustrated that they cannot use the Yoast tools themselves because of this issue, plus Yoast are offering no support with the issue. I hope that one of you guys has seen this problem before, or can spot a problem with the way the site has been built and can perhaps shed some light on the problem. I didn't build the site myself so won't be offended if you spot problems with it. Thanks in advance, Ben
Technical SEO | | bendyman0 -
How to Remove /feed URLs from Google's Index
Hey everyone, I have an issue with RSS /feed URLs being indexed by Google for some of our Wordpress sites. Have a look at this Google query, and click to show omitted search results. You'll see we have 500+ /feed URLs indexed by Google, for our many category pages/etc. Here is one of the example URLs: http://www.howdesign.com/design-creativity/fonts-typography/letterforms/attachment/gilhelveticatrade/feed/. Based on this content/code of the XML page, it looks like Wordpress is generating these: <generator>http://wordpress.org/?v=3.5.2</generator> Any idea how to get them out of Google's index without 301 redirecting them? We need the Wordpress-generated RSS feeds to work for various uses. My first two thoughts are trying to work with our Development team to see if we can get a "noindex" meta robots tag on the pages, by they are dynamically-generated pages...so I'm not sure if that will be possible. Or, perhaps we can add a "feed" paramater to GWT "URL Parameters" section...but I don't want to limit Google from crawling these again...I figure I need Google to crawl them and see some code that says to get the pages out of their index...and THEN not crawl the pages anymore. I don't think the "Remove URL" feature in GWT will work, since that tool only removes URLs from the search results, not the actual Google index. FWIW, this site is using the Yoast plugin. We set every page type to "noindex" except for the homepage, Posts, Pages and Categories. We have other sites on Yoast that do not have any /feed URLs indexed by Google at all. Side note, the /robots.txt file was previously blocking crawling of the /feed URLs on this site, which is why you'll see that note in the Google SERPs when you click on the query link given in the first paragraph.
Technical SEO | | M_D_Golden_Peak0 -
Best Practices for adding Dynamic URL's to XML Sitemap
Hi Guys, I'm working on an ecommerce website with all the product pages using dynamic URL's (we also have a few static pages but there is no issue with them). The products are updated on the site every couple of hours (because we sell out or the special offer expires) and as a result I keep seeing heaps of 404 errors in Google Webmaster tools and am trying to avoid this (if possible). I have already created an XML sitemap for the static pages and am now looking at incorporating the dynamic product pages but am not sure what is the best approach. The URL structure for the products are as follows: http://www.xyz.com/products/product1-is-really-cool
Technical SEO | | seekjobs
http://www.xyz.com/products/product2-is-even-cooler
http://www.xyz.com/products/product3-is-the-coolest Here are 2 approaches I was considering: 1. To just include the dynamic product URLS within the same sitemap as the static URLs using just the following http://www.xyz.com/products/ - This is so spiders have access to the folder the products are in and I don't have to create an automated sitemap for all product OR 2. Create a separate automated sitemap that updates when ever a product is updated and include the change frequency to be hourly - This is so spiders always have as close to be up to date sitemap when they crawl the sitemap I look forward to hearing your thoughts, opinions, suggestions and/or previous experiences with this. Thanks heaps, LW0 -
What's the SEO impact of url suffixes?
Is there an advantage/disadvantage to adding an .html suffix to urls in a CMS like WordPress. Plugins exist to do it, but it seems better for the user to leave it off. What do search engines prefer?
Technical SEO | | Cornucopia0 -
What's the difference between a category page and a content page
Hello, Little confused on this matter. From a website architectural and content stand point, what is the difference between a category page and a content page? So lets say I was going to build a website around tea. My home page would be about tea. My category pages would be: White Tea, Black Tea, Oolong Team and British Tea correct? ( I Would write content for each of these topics on their respective category pages correct?) Then suppose I wrote articles on organic white tea, white tea recipes, how to brew white team etc...( Are these content pages?) Do I think link FROM my category page ( White Tea) to my ( Content pages ie; Organic White Tea, white tea receipes etc) or do I link from my content page to my category page? I hope this makes sense. Thanks, Bill
Technical SEO | | wparlaman0 -
A question about RSS feeds and nofollow's
With the nofollow tag used very widely on the internet these days I was just wondering about how an RSS feed might help me find a way around it. Basically my question is this : I post a comment on a blog, it's approved and my comment together with my link(nofollow tag applied) is there. Now when the blogs RSS feed updates, does this nofollow tag get applied to the feed? As far as I can tell it does not - but I'm not too clue'd up on how the feed is generated. Anyone want to help me understand how it works and if what I'm suggesting would be 'a way around the nofollow tag' ? Thanks 🙂
Technical SEO | | DanHill0 -
Does 'framing' a website create duplicate content?
Something I have not come across before, but hope others here are able offer advice based on experience: A client has independently created a series of mini-sites, aimed at targeting specific locations. The tactic has worked very well and they have achieved a large amount of well targeted traffic as a result. Each mini-site is different but then in the nav, if you want to view prices or go to the booking page, that then links to what at first appears to be their main site. However, you then notice that the URL is actually situated on the mini-site. What they have done is 'framed' the main site so that it appears exactly the same even when navigating through this exact replica site. Checking the code, there is almost nothing there - in fact there is actually no content at all. Below the head, there is a piece of code: <frameset rows="*" framespacing=0 frameborder=0> <frame src="[http://www.example.com](view-source:http://www.yellowskips.com/)" frameborder=0 marginwidth=0 marginheight=0> <noframes>Your browser does not support frames. Click [here](http://www.example.com) to view.noframes> frameset> Given that main site content does not appear to show in the source code, do we have an issue with duplicate content? This issue is that these 'referrals' are showing in Analytics, despite the fact that the code does not appear in the source, which is slightly confusing for me. They have done this without consultation and I'm very concerned that this could potentially be creating duplicate content of their ENTIRE main site on dozens of mini-sites. I should also add that there are no links to the mini-sites from the main site, so if you guys advise that this is creating duplicate content, I would not be worried about creating a link-wheel if I advise them to link directly to the main site rather than the framed pages. Thanks!
Technical SEO | | RiceMedia0