Google Analytics Custom Filter
-
Hello,
Quick question, when I create a custom filter on a profile that already has data collected will that filter apply to already collected data or will the filter only apply from the day it was created?
Am doing a custom exclude IP filter.
Much thanks,
Davinia -
Great response, thanks Paul. That's answers all my questions!
-
A profile filter will definitely only affect the data collected after the filter was put in place, Davinia. There's no way for Google Analytics to retroactively apply it. It'll take 4 to 8 hours for you see data that the filter has affected as well - that's just the lag-time on GA's reporting.
If you're starting to apply custom filters, I would STRONGLY recommend that you also create a new profile that will continue to collect RAW data for the site. Just create an additional profile and never apply any filters to it, (You can use the Create Duplicate Profile button on your existing profile to make it easy)
That way if anything ever goes wrong with your active profile - like an accidentally misconfigured filter which irretrievably discards data - you'll still have a source of the original data. Because any data filtered out by a custom filter can also never be recovered just by removing the filter.
Just like custom filters, the new profile will only contain data from the date it was created, so best to get it set up now, not at some point in the future when you might already have a problem.
Lastly, I'd suggest you add an Annotation in your GA profile marking when you applied the filter. It's a great way to keep track of changes you've made that might affect results. Much easier than trying to figure out later what you might have done at a particular time that caused significant changes in results. (Useful for adding campaign launches, unusual media mentions/external links etc too.)
Paul
-
Thanks Jared,
Yes I do need to use a filter over an advanced segment but the article doesn't tell me if I can see the data straight away (it does for segments but not filters).
-
As far as I know - profile filters still do not work historically. See the "Differences Between Advanced Segments and Filtered Profiles" here:
http://support.google.com/analytics/bin/answer.py?hl=en&answer=1033017
Update: @Paul - couldn't have said it better - creating a new profile that collects raw data is excellent advice as well.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Drop in Bounce Rate in Google Analytics
Hi guys, I have recently seen a large drop in bounce rate (from GA) which seems unnatural for one of our clients website. Since the start of 2018, the bounce rate was consistently between 40-60%, and then saw a random spike, and now for the past two weeks, the bounce rate is below 10%. I was wondering if anyone had any ideas if this is a problem with GA, or the site itself. Site: https://www.zoomocarcredit.com/ Any comments/feedback is greatly appreciated. Thanks in advance! Jack. SnP0Hc4
Reporting & Analytics | | ChemistryMarketing0 -
Is there a way to filter all computers on a specific IPv6 network in Google Analytics?
Is there a quick way of filtering the IP addresses for all the computers on a network that's using IPv6? I want to filter out visits to our websites from the devices on our office network, but each computer (and phone and tablet) seems to have a different address. It _looks _like they all start the same way, though. One computer is xxxx:xxxx:xxxx:xxxx:aaaa:aaaa:aaaa:aaaa, another is xxxx:xxxx:xxxx:xxxx:bbbb:bbbb:bbbb:bbbb, my phone is xxxx:xxxx:xxxx:xxxx:cccc:cccc:cccc:cccc, etc. Does this mean that xxxx:xxxx:xxxx:xxxx is the address for our network as a whole, and I can just set up a Google Analytics filter for "IP addresses starting with..."? Or would doing that also filter out hits from, like, every visitor within a 20 mile radius of our office? If I need to simply put in the individual addresses for each and every device, I will. I'm just hoping it doesn't come to that. Thanks!
Reporting & Analytics | | BrianAlpert780 -
Collecting post codes / zip codes in Google Analytics - Terms of Service
Hi Mozzers, Just reading up on Google Analytic's Terms of Service and wondering if collecting post codes / zip codes (from a website's 'Find my nearest...' tool) adhere's to the following: "You will not (and will not allow any third party to) use the Service to track, collect or upload any data that personally identifies an individual (such as a name, email address or billing information), or other data which can be reasonably linked to such information by Google." What do you think?
Reporting & Analytics | | A_Q0 -
Google Analytics: Different stats for date range vs single month?
I've been scratching my head, chin, and you name it over this one. I have an advanced segment to remove bot traffic from my data. When I look at the Audience Overview data for a single month (let's say Aug). I am shown a session count. No problems here, however If I set the date range to (January - August). The august monthly stats is incorrect, much lower. What this means is that, if I export a CSV report from Jan-Aug, the data is wrong compared to individually recording a month. Anyone faced this? I've asked the question over at the Google Analytics technical section as well, but no answer P.S I even used the 'control the number of sessions used to calculate this report' tool but no luck.
Reporting & Analytics | | Bio-RadAbs0 -
Google Analytics Custom Alert For Goal Completions?
Hi currently setting up custom alerts for a website. I want to do a custom alerts for when goal completions decrease or increase by a certain % e.g. 20% as shown in the third example from this Moz Article back in 2012 - http://moz.com/blog/7-essential-google-intelligence-custom-alerts-that-keep-me-sane However when i go into my GA account the only options seem to be for when the goal completion conversion rate % drops. I could use this, but i rather do just based on completions rather than %. Any ideas on how i can do this? Thanks.
Reporting & Analytics | | MBASydney0 -
How to setup Google Analytic goals that go to different urls?
I would like to setup my form's conversion rate as a goal in my Google Analytics account. The goal is complete when someone enters their information and hits submit. Logically, the "Thank you page" would be the destination url for the goal. My problem is that the thank you page is outside of the primary domain, for example, my site is: SiteExampl.com but the Thank you URL is thankyouurl.com Is it possible to setup a goal like this? If so how. Thanks in advance!
Reporting & Analytics | | christinarule0 -
Google analytic conversion code in a single wordpress page
Hello How can I add/place the Google analytic conversion code in a single wordpress page? Example: http://www.newsmilecostarica.com/thank-you/ Thank you so much Andy
Reporting & Analytics | | newsmile0 -
Omniture vs Google Analytics
What's your opinion on analytics tools? Specifically Omniture vs Google Analytics. Is Omniture really that much more powerful than GA? Have you used GA Premium, the enterprise package? My main question - Can GA (free or premium) do everything that Omniture can? If GA Premium and Omniture were the same price, which would you choose? Is one harder to implement, pull reports, tweak, ect? Thanks in advance.
Reporting & Analytics | | akim260