Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Approved Word Separators in URLs
-
Hi There,
We are in the process of revamping our URL structure and my devs tell me they have a technical problem using a hyphen as a word separator. There's a whole lot of competing recommendations out there and at this point I'm just confused.
Does anyone have any idea what character would be next-best to the hyphen for separating words in a URL? Any reason to prefer one over another?
Some links I've found discussing the topic:
- This page says that "__Google has confirmed that the point (.), the comma (,) and the hyphen (-) are valid word separators in URL’s.": http://www.internetofficer.com/seo/google-word-separator/
- This page suggests the plus (+) symbol would be best: http://labs.phurix.net/posts/word-separators-in-urls
- This guy says he's tested and there's a whole bunch of symbols that will work as word separators: http://www.webproguide.com/articles/Symbols-as-word-separators-a-look-inside-the-search-engine-logic/
I'm leaning towards the tilde (~) or the plus (+) sign. Usage would be like so: http://www.domain.com/shop/sterling~silver OR /shop/sterling+silver etc...
Thanks in advance for your help!
-
Hey Jonaz, use the plus (+) sign. I think it's your best bet.
-
Hi All,
Anyone got a definitive answer on this one? I wish I could use dashes but can't. Any more advice on this would be greatly appreciated.
Thanks!
-
Hi jonaz, I think I was editing my post when you were replying. Dashes are best, yes. I'd say underscores would be second-best. If your developers can't work with dashes, then my suggestion would be to use underscores.
Using a plus sign (+) isn't bad. The plus sign represents a space character I believe.
-
Hey George,
Problem is that I can't use hyphens (-) and need an alternative... Unless you mean dashes like mdash and ndash? (i.e. – and —) Wasn't sure if those characters were okay for URLs and whether they are recognized as separators by google...
-
Hello jonaz,
Here's the short answer: dashes are best.
Next best might be underscores.
For the long answer, check this post out: http://www.seomoz.org/q/hyphens-v...
Hope this helps!
-
The joys.... good luck!
-
Thanks, Davinia. Didn't want to introduce too much complexity to the problem but the issue is that our devs already have a series of rules in place where the hyphen carries special meaning, so I'm gonna have to work under those constraints...
-
I haven't come across this issue before so can't comment on which alternative but I'd be looking for Google's best practice and select one from there (from Google dev website or perhaps Matt Cutts has covered this in a video).
It seems interesting that your dev team could use an alternative like ~ or + but not (-) a hyphen. Maybe push back for the use of a hyphen!
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
How do I customize Magento product urls?
I would like my product urls to be /category/manufacturer/name/part#. This would be the only url the item uses and how the product is accessed. It would also be used for product feeds. My first attempt was to use https://amasty.com/magento-unique-product-url.html This creates a single url but I can not customize it. Sometimes it selects the manufacturer and sometimes the category. My second attempt was with https://www.magentocommerce.com/magento-connect/custom-product-urls-seo.html I have it installed but it doesn't change the urls. Has anyone been able to do this successfully?
Technical SEO | | Tylerj0 -
Tool to Generate All the URLs on a Domain
Hi all, I've been using xml-sitemaps.com for a while to generate a list of all the URLs that exist on a domain. However, this tool only works for websites with under 500 URLs on a domain. The paid tool doesn't offer what we are looking for either. I'm hoping someone can help with a recommendation. We're looking for a tool that can: Crawl, and list, all the indexed URLs on a domain, including .pdf and .doc files (ideally in a .xls or .txt file) Crawl multiple domains with unlimited URLs (we have 5 websites with 500+ URLs on them) Seems pretty simple, but we haven't been able to find something that isn't tailored toward management of a single domain or that can crawl a huge volume of content.
Technical SEO | | timfrick0 -
Redirect URLS with 301 twice
Hello, I had asked my client to ask her web developer to move to a more simplified URL structure. There was a folder called "home" after the root which served no purpose. I asked for the URLs to be redirected using 301 to the new URLs which did not have this structure. However, the web developer didn't agree and decided to just rename the "home" folder "p". I don't know why he did this. We argued the case and he then created the URL structure we wanted. Initially he had 301 redirected the old URLS (the one with "Home") to his new version (the one with the "p"). When we asked for the more simplified URL after arguing, he just redirected all the "p" URLS to the PAGE NOT FOUND. However, remember, all the original URLs are now being redirected to the PAGE NOT FOUND as a result. The problems I see are these unless he redirects again: The new simplified URLS have to start from scratch to rank 2)We have duplicated content - two URLs with the same content Customers clicking products in the SERPs will currently find that they are being redirect to the 404 page. I understand that redirection has to occur but my questions are these: Is it ok to redirect twice with 301 - so old URL to the "p" version then to final simplified version. Will link juice be lost doing this twice? If he redirects from the original URLS to the final version missing out the "p" version, what should happen to the "p" version - they are currently indexed. Any help would be appreciated. Thanks
Technical SEO | | AL123al0 -
Spaces (actual spaces) in URL
Hi all, Is there a huge loss of SEO performance if a URL shows spaces with an actual space (i.e. %20) in the URL rather than a "-" (or indeed a "_")? I know the preferred option is to have a "-", but I am just wondering if it is worth our effort to manually change the "%20" to a "-" in all the instances? Thanks 🙂 Diana
Technical SEO | | Diana.varbanescu0 -
URL - Well Formed or Malformed
Hi Mozzers, I've been mulling over whether my URLs could benefit a little SEO tweaking. I'd be grateful for your opinion. For instance, we've a product, a vintage (second hand), red Chanel bag. At the moment the URL is: www.vintageheirloom.com/vintage-chanel-bags/2.55-bags/red-2.55-classic-double-flap-bag-1362483150 Broken down... vintage-chanel-bags = this is the main product category, i.e. vintage chanel bags 2.55-bags = is a sub category of the main category above. They are vintage Chanel 2.55 bags, but I've not included 'vintage' again. 2.55 bags are a type of Chanel bag. red-2.55-classic-double-flap-bag = this is the product, the bag **1362483150 **= this is a unique id, to prevent the possibility of duplicate URLs As you no doubt can see we target, in particular, the phrase **vintage. **The actual bag / product title is: Vintage Chanel Red 2.55 classic double flap bag 10” / 25cm With this in mind, would I be better off trying to match the product name with the end of the URL as closely as possible? So a close match below would involve not repeating 'chanel' again: www.vintageheirloom.com/chanel-bags/2.55-bags/vintage-red-2.55-classic-double-flap-bag or an exact match below would involve repeating 'chanel': www.vintageheirloom.com/chanel-bags/2.55-bags/vintage-chanel-red-2.55-classic-double-flap-bag This may open up more flexibility to experiment with product terms like second hand, preowned etc. Maybe this is a bad idea as I'm removing the phrase 'vintage' from the main category. But this logical extension of this looks like keyword stuffing !! www.vintageheirloom.com/vintage-chanel-bags/vintage-2.55-bags/vintage-chanel-red-2.55-classic-double-flap-bag Maybe this is over analyzing, but I doubt it? Thanks for looking. Kevin
Technical SEO | | well-its-1-louder0 -
Double Slash // in URL
My client is using double forward slahes in URL like this "//" is this affecting SEO?
Technical SEO | | yanaiguana1110 -
Special characters in URL
Hi There, We're in the process of changing our URL structure to be more SEO friendly. Right now I'm struggling to find a good way to handle slashes that are part of a targeted keyword. For example, if I have a product page and my product title is "1/2 ct Diamond Earrings in 14K Gold" which of the following URLs is the right way to go if I'm targeting the product title as the search keyword? example.com/jewelry/1-2-ct-diamond-earrings-in-14k-gold example.com/jewelry/12-ct-diamond-earrings-in-14k-gold example.com/jewelry/1_2-ct-diamond-earrings-in-14k-gold example.com/jewelry/1%2F2-ct-diamond-earrings-in-14k-gold Thanks!
Technical SEO | | Richline_Digital0 -
Duplicate canonical URLs in WordPress
Hi everyone, I'm driving myself insane trying to figure this one out and am hoping someone has more technical chops than I do. Here's the situation... I'm getting duplicate canonical tags on my pages and posts, one is inside of the WordPress SEO (plugin) commented section, and the other is elsewhere in the header. I am running the latest version of WordPress 3.1.3 and the Genesis framework. After doing some testing and adding the following filters to my functions.php: <code>remove_action('wp_head', 'genesis_canonical'); remove_action('wp_head', 'rel_canonical');</code> ... what I get is this: With the plugin active + NO "remove action" - duplicate canonical tags
Technical SEO | | robertdempsey
With the plugin disabled + NO "remove action" - a single canonical tag
With the plugin disabled + A "remove action" - no canonical tag I have tried using only one of these remove_actions at a time, and then combining them both. Regardless, as long as I have the plugin active I get duplicate canonical tags. Is this a bug in the plugin, perhaps somehow enabling the canonical functionality of WordPress? Thanks for your help everyone. Robert Dempsey0