Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
New theme adds ?v=1d20b5ff1ee9 to all URL's as part of cache. How does this affect SEO
-
New theme I am working in ads ?v=1d20b5ff1ee9 to every URL. Theme developer says its a server setting issue. GoDaddy support says its part of cache an becoming prevalent in new themes.
How does this impact SEO?
-
Thanks !
I turned of Geolocate (with page caching support), and as you said, it corrected the problem.
Thanks again.
Bob
-
Hi Bob,
I second Paul. His answer is a good one. Hope we helped you.
Sincerely,
Dana
-
Just FYI - the advice to remove query strings from static resources in that WordPress article is the proverbial Very Bad Idea. If you want a full explanation, let me know, but trust me - don't.
There's a world of difference between static files like CSS and Javascript having variables, and having those variables on page URLs.
You should have self-referential canonical tags on every page on your site anyway, which would take care of the duplicate URL issue created by the variables added to each URL, but there are still many other reasons why they're bad for SEO and usability, as Dana points out.
Paul
-
You have a configuration choice in your WooCommerce settings that is causing this, Bob.
You've got the default customer location in settings set to "Geolocate (with page caching support)". This causes the variable to be added to the URL in order to enable the geo-location for each customer. Turn it off and the variable will no longer be added.
And yea, this is a disaster for SEO, as Dana explains, and it will also badly foul your Analytics and it even borks your site's internal search.
Hope that makes sense?
Paul
-
Hi again Bob,
Take a look at this thread on how to remove query strings from static parameters...I believe your answer is there.
https://wordpress.org/support/topic/how-to-remove-query-strings-from-static-resources
Dana
P.S. Why is this a problem for SEO? A couple of reasons:
1. It's highly likely your content will get shared without the query parameter AND with the query parameter. This will effectively split your link equity between two versions of the same page.
2.Google Search Console is very bad at understanding that the page without the query string is the same as it is with the query string...you'll likely get a lot of duplicate content notifications.
3. From an end-user standpoint, it's just plain ugly....and end user experience matters to SEO right? - I understand that's somewhat facetious....but it's your business right? You want it to look a good, solid, high-quality, professional site. Ugly query parameters scream "I hired my 21 year old nephew to b build me a WordPress site."
-
Hi Bob,
What CMS are you working with? Once you answer that I might be able to help a little more.
Dana
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
What happens when you replace a page with a new version that has the same URL?
a new page template was created the plan is to publish the new page (which has the same URL as before) to web and delete the old page that has the URL , will that have an SEO implications ?
Technical SEO | | lina_digital1 -
SERP result (URL) doesn't change after a 301
A couple of months ago there was a result in Google for our branded search term which wasn't the 'official' URL, actually the result shown in the SERP was www.mycompany-ip.nl. We've applied a 301 redirect of this URL to the 'official' URL which is a subdomain: department.mycompany.nl. From Google the redirect is obviously working, but up until now, I don't see Google replacing the incorrect URL by the correct URL. I am wondering what to do to make the result correct. André
Technical SEO | | ConclusionDigital0 -
Word mentioned twice in URL? Bad for SEO?
Is a URL like the one below going to hurt SEO for this page? /healthcare-solutions/healthcare-identity-solutions/laboratory-management.html I like the match the URL and H1s as close as possible but in this case it looks a bit funky. /healthcare-solutions/healthcare-identity-solutions/laboratory-management.html
Technical SEO | | jsilapas0 -
Migrating to new subdomain with new site and new content.
Our marketing department has decided that a new site with new content is needed to launch new products and support our existing ones. We cannot use the same subdomain(www = old subdomain and ww1 = new subdomain)as there is a technically clash between the windows server currently used, and the lamp stack required to run the new wordpress based CMS and site. We also have an aging piece of SAAS software on the www domain which is makes moving it to it's own subdomain far too risky. 301's have been floated as a way of managing the transition. I'm not too keen on that idea due to the double effect of new subdomain and content, and the SEO impact it might have. I've suggested uploading the new site to the new subdomain while leaving the old site in place. Then gradually migrating sections over before turning parts of the old site off and using a 301 at that point to finalise the move. The old site would inform user's there is a new version and it would then convert them to the new site(along with a cookie to auto redirect them in future.) while still leaving the old content in place for existing search traffic, bookmarks and visitors via static URLs. Before turning off sections on the old site we would create rel canonicals to redirect to the new pages based on a a mapped set of URLs(this in itself concerns me as the rel canonical is essentially linking to different content). Would be grateful for any advice on whether this strategy is flawed or whether another strategy might be more suitable?
Technical SEO | | Rezza0 -
SEO-optimized Urls for Japan: English or Japanese Characters
Hi, Anyone got experience with Japanese Urls? I'm currently working on the relaunch of the Japanese site of the troteclaser.com and I wonder if we should use English or Japanese characters for the Urls. I found some topics on the forums about this, but they only tell you that Google can crawl both without problems. The question is if there is a benefit if Japanese characters are used.
Technical SEO | | Troteclaser1 -
Are Collapsible DIV's SEO-Friendly?
When I have a long article about a single topic with sub-topics I can make it user friendlier when I limit the text and hide text just showing the next headlines, by using expandable-collapsible div's. My doubt is if Google is really able to read onclick textlinks (with javaScript) or if it could be "seen" as hidden text? I think I read in the SEOmoz Users Guide, that all javaScript "manipulated" contend will not be crawled. So from SEOmoz's Point of View I should better make use of old school named anchors and a side-navigation to jump to the sub-topics? (I had a similar question in my post before, but I did not use the perfect terms to describe what I really wanted. Also my text is not too long (<1000 Words) that I should use pagination with rel="next" and rel="prev" attributes.) THANKS for every answer 🙂
Technical SEO | | inlinear0 -
Javascript to manipulate Google's bounce rate and time on site?
I was referred to this "awesome" solution to high bounce rates. It is suppose to "fix" bounce rates and lower them through this simple script. When the bounce rate goes way down then rankings dramatically increase (interesting study but not my question). I don't know javascript but simply adding a script to the footer and watch everything fall into place seems a bit iffy to me. Can someone with experience in JS help me by explaining what this script does? I think it manipulates the reporting it does to GA but I'm not sure. It was supposed to be placed in the footer of the page and then sit back and watch the dollars fly in. 🙂
Technical SEO | | BenRWoodard1 -
Is there a great tool for URL mapping old to new web site?
We are implementing new design and removing some pages and adding new content. Task is to correctly map and redirect old pages that no longer exist.
Technical SEO | | KnutDSvendsen0