Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
A question about RSS feeds and nofollow's
-
With the nofollow tag used very widely on the internet these days I was just wondering about how an RSS feed might help me find a way around it. Basically my question is this : I post a comment on a blog, it's approved and my comment together with my link(nofollow tag applied) is there. Now when the blogs RSS feed updates, does this nofollow tag get applied to the feed? As far as I can tell it does not - but I'm not too clue'd up on how the feed is generated.
Anyone want to help me understand how it works and if what I'm suggesting would be 'a way around the nofollow tag' ?
Thanks
-
Thanks Alan - I'm not looking for brute force link building was just curious about the concept
-
@Alan +1
-
Regardless of whether they're updated or not, RSS feeds are generating duplicate content and not the original source, so the value is going to be either none, or more likely, less than comments on an original source. And if you're actually here asking this question, I'd suggest that unless you perform a specific test, in a specific situation across a specific market niche, you're not always going to get the same results.
And unless you're looking for brute force link building, it seems like a poor time expense to pursue these given the dupe-content factor. And if you are looking for brute force link building, don't rely on this method being sustainable.
-
What about dynamically created blogs and databases - surely comments are also stored in the database and then retrieved when the visitor requests the 'page' ? That would keep updating the feed atleast daily when the cron job is run?
And the commentRSS feed is a dofollow? That can be indexed by the search engine and still sits on the domain? Cos that then sounds to me like a dofollow link coming effectively from the domain of the blog?!
-
If you are talking about a commentRSS feed yes, it´s updated when you write a new comment, but the RSS show nofollow tag too. If you are talking about a normal blog RSSfeed, the new comments don´t update the RSS.
-
Surely that can'y be the case - since one of the uses for an RSS feed is to track when someone has replied to your comment/made another comment?
-
Yes, and the comments don´t update the blog RSS feed.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
What's the best way to test Angular JS heavy page for SEO?
Hi Moz community, Our tech team has recently decided to try switching our product pages to be JavaScript dependent, this includes links, product descriptions and things like breadcrumbs in JS. Given my concerns, they will create a proof of concept with a few product pages in a QA environment so I can test the SEO implications of these changes. They are planning to use Angular 5 client side rendering without any prerendering. I suggested universal but they said the lift was too great, so we're testing to see if this works. I've read a lot of the articles in this guide to all things SEO and JS and am fairly confident in understanding when a site uses JS and how to troubleshoot to make sure everything is getting crawled and indexed. https://sitebulb.com/resources/guides/javascript-seo-resources/ However, I am not sure I'll be able to test the QA pages since they aren't indexable and lives behind a login. I will be able to crawl the page using Screaming Frog but that's generally regarded as what a crawler should be able to crawl and not really what Googlebot will actually be able to crawl and index. Any thoughts on this, is this concern valid? Thanks!
Technical SEO | | znotes0 -
What's the best way to handle product filter URLs?
I've been researching and can't find a clear cut answer. Imagine you have a product category page e.g. domain/jeans You've a lot of options as to how to filter the results domain/jeans?=ladies,skinny,pink,10 or domain/jeans/ladies-skinny-pink-10 or domain/jeans/ladies/skinny?=pink,10 And in this how do you handle titles, breadcrumbs etc. Is the a way you prefer to handle filters and why do you do it that way? I'm trying to make my mind up as some very big names handle this differently e.g. http://www.next.co.uk/shop/gender-women-category-jeans/colour-pink-fit-skinny-size-10r VS https://www.matalan.co.uk/womens/shop-by-category/jeans?utf8=✓&[facet_filter][meta.tertiary_category][Skinny]=on&[facet_filter][variants.meta.size][Size+10]=on&[facet_filter][meta.master_colour][Midwash]=on&[facet_filter][min_current_price][gte]=6.0&[facet_filter][min_current_price][lte]=18.0&per=36&sort=
Technical SEO | | RodneyRiley0 -
301 Re-directing 'empty' domains
Hello, My client had purchased a few domains and 301 re-directed them, pointing to our main website. As far as I am aware the 'empty domains' are brand related but no content has ever been displayed on them, and I doubt they have much authority. The issue here is that we took a dive in ranking for our main keyword, I had a look on ahrefs and found the below: | www.empty-domain/our-keyword | 30 | 19 | 1 | fb 0
Technical SEO | | SO_UK
G+ 0
in 4 | REDIRECT 301 TO www.main-domain/our-keyword | 8 Feb '175 d | The ranking dip happened at the same time as the re-direct was re-discovered / re-crawled. Could the 'empty' URL in question been causing us any issues? I understand that this is terrible practice for 301 redirects, I was hoping someone in the community could shed light on any possible solution for this.0 -
Strange URL's for client's site
We just picked up a new client and I've been doing some digging around on their site. They have quite the wide variety of URL's that make for a rather confusing experience. One of the milder examples is their "About" page. Normally I would expect something along the lines of: www.website.com/about I see: www.website.com/default.asp?Page=About I'm typically a graphic designer and know basically nothing about code, but I just assume this has something funky to do with how their website was constructed. I'm assuming this isn't particularly SEO friendly, but it doesn't seem too bad. Until I got to another section of their site. It's a section that logically should look like: www.website.com/training/public-seminars It's: www.website.com/default.asp?Page=MT&Area=Seminars&Sub=MRM Now that's nonsensical to me! Normally if a client has terrible URL's, I'd say let's do some redirects, but I guess I'm a little intimidated by these. Do the URL's have to be structured like this for some reason? Am I missing some important area of coding here? However, the most bizarre example is a link back to their website from yellowpages.com. Where normally I would expect it to lead to their homepage, I get this bizarre-looking thing: http://website1-px.rtrk.com/?utm_source=ReachLocal&utm_medium=PPC&utm_campaign=AssetManagement&reference_id=15&publisher=yellowpages&placement=ypwebsitemip&action_target=listing_website And as you browse through the site, that strange domain stays. For example the About page is now: http://website1-px.rtrk.com/default.asp?Page=About I would try to google this but I have no idea where to even start! What is going on with these links? Will we be able to fix them to something presentable without breaking their website?
Technical SEO | | everestagency0 -
Good alternatives to Xenu's Link Sleuth and AuditMyPc.com Sitemap Generator
I am working on scraping title tags from websites with 1-5 million pages. Xenu's Link Sleuth seems to be the best option for this, at this point. Sitemap Generator from AuditMyPc.com seems to be working too, but it starts handing up, when a sitemap file, the tools is working on,becomes too large. So basically, the second one looks like it wont be good for websites of this size. I know that Scrapebox can scrape title tags from list of url, but this is not needed, since this comes with both of the above mentioned tools. I know about DeepCrawl.com also, but this one is paid, and it would be very expensive with this amount of pages and websites too (5 million ulrs is $1750 per month, I could get a better deal on multiple websites, but this obvioulsy does not make sense to me, it needs to be free, more or less). Seo Spider from Screaming Frog is not good for large websites. So, in general, what is the best way to work on something like this, also time efficient. Are there any other options for this? Thanks.
Technical SEO | | blrs120 -
My old URL's are still indexing when I have redirected all of them, why is this happening?
I have built a new website and have redirected all my old URL's to their new ones but for some reason Google is still indexing the old URL's. Also, the page authority for all of my pages has dropped to 1 (apart from the homepage) but before they were between 12 to 15. Can anyone help me with this?
Technical SEO | | One2OneDigital0 -
Best Practices for adding Dynamic URL's to XML Sitemap
Hi Guys, I'm working on an ecommerce website with all the product pages using dynamic URL's (we also have a few static pages but there is no issue with them). The products are updated on the site every couple of hours (because we sell out or the special offer expires) and as a result I keep seeing heaps of 404 errors in Google Webmaster tools and am trying to avoid this (if possible). I have already created an XML sitemap for the static pages and am now looking at incorporating the dynamic product pages but am not sure what is the best approach. The URL structure for the products are as follows: http://www.xyz.com/products/product1-is-really-cool
Technical SEO | | seekjobs
http://www.xyz.com/products/product2-is-even-cooler
http://www.xyz.com/products/product3-is-the-coolest Here are 2 approaches I was considering: 1. To just include the dynamic product URLS within the same sitemap as the static URLs using just the following http://www.xyz.com/products/ - This is so spiders have access to the folder the products are in and I don't have to create an automated sitemap for all product OR 2. Create a separate automated sitemap that updates when ever a product is updated and include the change frequency to be hourly - This is so spiders always have as close to be up to date sitemap when they crawl the sitemap I look forward to hearing your thoughts, opinions, suggestions and/or previous experiences with this. Thanks heaps, LW0 -
Adding 'NoIndex Meta' to Prestashop Module & Search pages.
Hi Looking for a fix for the PrestaShop platform Look for the definitive answer on how to best stop the indexing of PrestaShop modules such as "send to a friend", "Best Sellers" and site search pages. We want to be able to add a meta noindex ()to pages ending in: /search?tag=ball&p=15 or /modules/sendtoafriend/sendtoafriend-form.php We already have in the robot text: Disallow: /search.php
Technical SEO | | reallyitsme
Disallow: /modules/ (Google seems to ignore these) But as a further tool we would like to incude the noindex to all these pages too to stop duplicated pages. I assume this needs to be in either the head.tpl or the .php file of each PrestaShop module.? Or is there a general site wide code fix to put in the metadata to apply' Noindex Meta' to certain files. Current meta code here: Please reply with where to add code and what the code should be. Thanks in advance.0