Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Is using dots in URL path really a problem?
-
we have a couple of pages displaying a dot in the URL path like
domain.com/mr.smith/widget-mr.smith
It displays fine in chrome, firefox and IE and for the user it may actually look better than replacing it by _ or -.
Did this ever cause problems to anybody?
Any statement from google about it?
Should I change existing URLs?If so, which other characters can I use in the URL instead of underscore and dash, since in our system dash and underscore are already used for rewriting other characters.
Thanks
-
Hi Andrews,
While the difference between dashes and underscores use to be a big issue a few years back its something that seems to hold minimal merit now. The two can be used rather interchangeably without any major impact. This was phased out around the same time as exact-match-domain value was as far too many people were abusing the long-tail dash page method.
-
While I've never come across this exact problem before I can share with you one my mantras that applies here:
"If a system (browser, search engine, etc) needs to perform a data re-write, you aren't accessible enough."
Google loves accessibility. It always wants the user to be able to easily access information and it wants it's spiders to be able to easily index and categorize the information. When accessibility options such as javascript versioning or if a site is using flash or not have an impact then it would only logically follow that more obvious structural access issues do come into effect.
From a technology stand point I can tell you that "." is not traditionally used in the scope of a URL/file structure as it a reserved character and therefore your structure is being re-written to display those. Much like international domains like the chinese internationalized domain name extension .中国 (which is basically a visual re-encode of the unicode: xn--fiqs8s) For the sake of accessibility, proper structure formatting and system practicality you should avoid using non-standard characters such as the . in your url
-
Hi!
As far as I know, this really isn't a huge problem (could be mistaken). I guess it depends...
In regards to readability, I prefer using dashes (-), as they tend to be easier to read. Underscores may be mistaken for a space). Here's what Matt Cutts had to say about this some years ago: http://www.mattcutts.com/blog/whitehat-seo-tips-for-bloggers/ (and http://www.mattcutts.com/blog/dashes-vs-underscores/)
I believe I have read that Google and other search engines read URLs like this when looking for semantic meanings:
- /this-is-part-of-a-website-address = this is part of a website address
- /this_is_part_of_a_website_address = thisispartofawebsiteaddress
At least that used to be the case...It could be changed now.
In your example, I would not obsess too much about it, as it gives perfect semantic meaning. Have you considered removing special characters, instead of replacing them with a "-" ?
Hope this helps.
Best regards,
Anders
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Mass URL changes and redirecting those old URLS to the new. What is SEO Risk and best practices?
Hello good people of the MOZ community, I am looking to do a mass edit of URLS on content pages within our sites. The way these were initially setup was to be unique by having the date in the URL which was a few years ago and can make evergreen content now seem dated. The new URLS would follow a better folder path style naming convention and would be way better URLS overall. Some examples of the **old **URLS would be https://www.inlineskates.com/Buying-Guide-for-Inline-Skates/buying-guide-9-17-2012,default,pg.html
Intermediate & Advanced SEO | | kirin44355
https://www.inlineskates.com/Buying-Guide-for-Kids-Inline-Skates/buying-guide-11-13-2012,default,pg.html
https://www.inlineskates.com/Buying-Guide-for-Inline-Hockey-Skates/buying-guide-9-3-2012,default,pg.html
https://www.inlineskates.com/Buying-Guide-for-Aggressive-Skates/buying-guide-7-19-2012,default,pg.html The new URLS would look like this which would be a great improvement https://www.inlineskates.com/Learn/Buying-Guide-for-Inline-Skates,default,pg.html
https://www.inlineskates.com/Learn/Buying-Guide-for-Kids-Inline-Skates,default,pg.html
https://www.inlineskates.com/Learn/Buying-Guide-for-Inline-Hockey-Skates,default,pg.html
https://www.inlineskates.com/Learn/Buying-Guide-for-Aggressive-Skates,default,pg.html My worry is that we do rank fairly well organically for some of the content and don't want to anger the google machine. The way I would be doing the process would be to edit the URLS to the new layout, then do the redirect for them and push live. Is there a great SEO risk to doing this?
Is there a way to do a mass "Fetch as googlebot" to reindex these if I do say 50 a day? I only see the ability to do 1 URL at a time in the webmaster backend.
Is there anything else I am missing? I believe this change would overall be good in the long run but do not want to take a huge hit initially by doing something incorrectly. This would be done on 5- to a couple hundred links across various sites I manage. Thanks in advance,
Chris Gorski0 -
Competitor Title, can I use the same???
there are some pages, my competitor is ranking well and also, we have done page optimization it is 100% for page title keywords as im going to use the same title of the competitor? Will this affect me? Pls suggest wht should I do..
Intermediate & Advanced SEO | | Rahim1190 -
Image URLs - best practice
Hi - I'm assuming image URL best practice follows same principles as non image URLs (not too many files and so on) - I notice alot of web devs putting photos in subdomains, so wonder if I'm missing something (I usually avoid subdomains like the plague)!
Intermediate & Advanced SEO | | McTaggart1 -
Replace dynamic paramenter URLs with static Landing Page URL - faceted navigation
Hi there, got a quick question regarding faceted navigation. If a specific filter (facet) seems to be quite popular for visitors. Does it make sense to replace a dynamic URL e.x http://www.domain.com/pants.html?a_type=239 by a static, more SEO friendly URL e.x http://www.domain.com/pants/levis-pants.html by creating a proper landing page for it. I know, that it is nearly impossible to replace all variations of this parameter URLs by static ones but does it generally make sense to do this for the most popular facets choose by visitors. Or does this cause any issues? Any help is much appreciated. Thanks a lot in advance
Intermediate & Advanced SEO | | ennovators0 -
Attack of the dummy urls -- what to do?
It occurs to me that a malicious program could set up thousands of links to dummy pages on a website: www.mysite.com/dynamicpage/dummy123 www.mysite.com/dynamicpage/dummy456 etc.. How is this normally handled? Does a developer have to look at all the parameters to see if they are valid and if not, automatically create a 301 redirect or 404 not found? This requires a table lookup of acceptable url parameters for all new visitors. I was thinking that bad url names would be rare so it would be ok to just stop the program with a message, until I realized someone could intentionally set up links to non existent pages on a site.
Intermediate & Advanced SEO | | friendoffood1 -
Using Canonical URL to poin to an external page
I was wondering if I can use a canonical URL that points to a page residing on external site? So a page like:
Intermediate & Advanced SEO | | llamb
www.site1.com/whatever.html will have a canonical link in its header to www.site2.com/whatever.html. Thanks.0 -
URL mapping for site migration
Hi all! I'm currently working on a migration for a large e-commerce site. The old one has around 2.5k urls, the new one 7.5k. I now need to sort out the redirects from one to the other. This is proving pretty tricky, as the URL structure has changed site wide. There doesn't seem to be any consistent rules either so using regex doesn't really work. By and large, the copy appears to be the same though. Does anybody know of a tool I can crawl the sites with that will export the crawled url and related copy into a spreadsheet? That way I can crawl both sites and compare the copy to match them up. Thanks!
Intermediate & Advanced SEO | | Blink-SEO0 -
Avoiding Duplicate Content with Used Car Listings Database: Robots.txt vs Noindex vs Hash URLs (Help!)
Hi Guys, We have developed a plugin that allows us to display used vehicle listings from a centralized, third-party database. The functionality works similar to autotrader.com or cargurus.com, and there are two primary components: 1. Vehicle Listings Pages: this is the page where the user can use various filters to narrow the vehicle listings to find the vehicle they want.
Intermediate & Advanced SEO | | browndoginteractive
2. Vehicle Details Pages: this is the page where the user actually views the details about said vehicle. It is served up via Ajax, in a dialog box on the Vehicle Listings Pages. Example functionality: http://screencast.com/t/kArKm4tBo The Vehicle Listings pages (#1), we do want indexed and to rank. These pages have additional content besides the vehicle listings themselves, and those results are randomized or sliced/diced in different and unique ways. They're also updated twice per day. We do not want to index #2, the Vehicle Details pages, as these pages appear and disappear all of the time, based on dealer inventory, and don't have much value in the SERPs. Additionally, other sites such as autotrader.com, Yahoo Autos, and others draw from this same database, so we're worried about duplicate content. For instance, entering a snippet of dealer-provided content for one specific listing that Google indexed yielded 8,200+ results: Example Google query. We did not originally think that Google would even be able to index these pages, as they are served up via Ajax. However, it seems we were wrong, as Google has already begun indexing them. Not only is duplicate content an issue, but these pages are not meant for visitors to navigate to directly! If a user were to navigate to the url directly, from the SERPs, they would see a page that isn't styled right. Now we have to determine the right solution to keep these pages out of the index: robots.txt, noindex meta tags, or hash (#) internal links. Robots.txt Advantages: Super easy to implement Conserves crawl budget for large sites Ensures crawler doesn't get stuck. After all, if our website only has 500 pages that we really want indexed and ranked, and vehicle details pages constitute another 1,000,000,000 pages, it doesn't seem to make sense to make Googlebot crawl all of those pages. Robots.txt Disadvantages: Doesn't prevent pages from being indexed, as we've seen, probably because there are internal links to these pages. We could nofollow these internal links, thereby minimizing indexation, but this would lead to each 10-25 noindex internal links on each Vehicle Listings page (will Google think we're pagerank sculpting?) Noindex Advantages: Does prevent vehicle details pages from being indexed Allows ALL pages to be crawled (advantage?) Noindex Disadvantages: Difficult to implement (vehicle details pages are served using ajax, so they have no tag. Solution would have to involve X-Robots-Tag HTTP header and Apache, sending a noindex tag based on querystring variables, similar to this stackoverflow solution. This means the plugin functionality is no longer self-contained, and some hosts may not allow these types of Apache rewrites (as I understand it) Forces (or rather allows) Googlebot to crawl hundreds of thousands of noindex pages. I say "force" because of the crawl budget required. Crawler could get stuck/lost in so many pages, and my not like crawling a site with 1,000,000,000 pages, 99.9% of which are noindexed. Cannot be used in conjunction with robots.txt. After all, crawler never reads noindex meta tag if blocked by robots.txt Hash (#) URL Advantages: By using for links on Vehicle Listing pages to Vehicle Details pages (such as "Contact Seller" buttons), coupled with Javascript, crawler won't be able to follow/crawl these links. Best of both worlds: crawl budget isn't overtaxed by thousands of noindex pages, and internal links used to index robots.txt-disallowed pages are gone. Accomplishes same thing as "nofollowing" these links, but without looking like pagerank sculpting (?) Does not require complex Apache stuff Hash (#) URL Disdvantages: Is Google suspicious of sites with (some) internal links structured like this, since they can't crawl/follow them? Initially, we implemented robots.txt--the "sledgehammer solution." We figured that we'd have a happier crawler this way, as it wouldn't have to crawl zillions of partially duplicate vehicle details pages, and we wanted it to be like these pages didn't even exist. However, Google seems to be indexing many of these pages anyway, probably based on internal links pointing to them. We could nofollow the links pointing to these pages, but we don't want it to look like we're pagerank sculpting or something like that. If we implement noindex on these pages (and doing so is a difficult task itself), then we will be certain these pages aren't indexed. However, to do so we will have to remove the robots.txt disallowal, in order to let the crawler read the noindex tag on these pages. Intuitively, it doesn't make sense to me to make googlebot crawl zillions of vehicle details pages, all of which are noindexed, and it could easily get stuck/lost/etc. It seems like a waste of resources, and in some shadowy way bad for SEO. My developers are pushing for the third solution: using the hash URLs. This works on all hosts and keeps all functionality in the plugin self-contained (unlike noindex), and conserves crawl budget while keeping vehicle details page out of the index (unlike robots.txt). But I don't want Google to slap us 6-12 months from now because it doesn't like links like these (). Any thoughts or advice you guys have would be hugely appreciated, as I've been going in circles, circles, circles on this for a couple of days now. Also, I can provide a test site URL if you'd like to see the functionality in action.0