Why do I get different results with On-Page Grader and Page Optimization tool? What is the difference between these two tools?
-
I use the Page Optimization tool to evaluate and make updates to a page until I get a grade of "A." But when I add the page and the keyword to the Page Optimization section of my campaign, it scores a 76% or 85% (which looks like a C or B to me). What would account for the difference in the evaluation results?
Thanks for your help!
-
Hi Brandon! Sorry about any confusion around this.
The reason you're seeing different scoring metrics is that we recently updated the Page Optimization section within your campaign. We realized the A-F grading system, while understandable in certain countries, is not used world-wide. It was causing confusion so we changed it to a 1-100 scoring system. We also adjusted some of the weighting of the optimization factors and added new explanations for the on-page issues. The Page Grader tool has not yet seen some of these updates, so you'll still see the old scoring system there, and because of the differences in weighting for the factors you might see slightly different scores. We plan to get the Page Grader up to par in the future!
I hope that clarifies things!
-
Well ... are you checking based on the same keyword? That's the first question. They both use 27 data points and I do think there's quite a lot of overlap, if not 100% ... so they should be fairly similar in terms of what's missing/what you should fix.
I just don't think they're graded the same way with the weights. As an example:
If I check my site http://mattantonino.com/ in the Page Optimization tab for my name, I see a score of 79 because I have addressed 22/27 factors.
Using the on-page grader I have also addressed 22/27 factors but ... I get an "F" for optimizing this keyphrase.
But the grader rates the importance of each factor - Critical! My title doesn't include my name. And two of the factors are "high importance." The grader says that as well - "We weight the items graded by their importance level, which we determine by our industry experience and correlation research."
I think the Page Optimization is not weighted the same way - it's more of "how many boxes did you check."
As long as your SEO is done fairly well, the on-page grader AND the Page Optimization should only be used as a guide. I used the above example to illustrate the point as I'm currently ranking #2 behind my well-optimized LinkedIn profile for my name. Yes, if I put my name in the title I would shoot to #1. But #2 and the page got an F on the grader.
I chose the #1 ranking site for "SEO" here locally and it receives a "B" grade with the keyword used 193 times. The sites ranked #2 & 3 get an A and the one ranked 90th gets an A as well.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Site Crawl 1-page 301 status error but httpstatus.io says its 403
I am trying to run a site crawl for my website and MOZ is only resulting in 1 page crawled with the home page URL Status Code of 301. However when I run it in httpstatus.io it is giving me a 403 status error. Im curious as to why MOZ is saying its a 301 and httpstatus.io is saying 403. Is there anything I can do in MOZ first to get the site crawled before asking my developers to look into the 403 error?
Moz Bar | | JohnConover0 -
When I try to run a Moz report, it sends me to a 404 page?
Hey there. I'm trying to export a .pdf to send to my client. When I click "export pdf", the page sits for a second then goes to a 404 page? I've never seen this before. Is anyone else getting this problem?
Moz Bar | | TaylorRHawkins2 -
Moz Crawl only crawling the top level page (1 page)
For the past few mounts my weekly site crawl has been inconsistent. One week works fine, it crawls all of my 500 or so pages. The following week it only crawls 1 page (http://mydomain.com) and nothing else. A few weekly scan go by and the crawl is back up the the 500 or so pages.I went ahead and created several campaigns with duplicate settings and crawled the site. Most times but not all the new campaign's crawl works fine crawling all pages. But within a week or two the weekly crawl will fail again. (crawling 1 page). Currently i have four campaign's all with the same settings running weekly crawls. 2 campaign's crawled the 500 pages and two crawled only the single page. Any help will be greatly appreciated
Moz Bar | | dmaude0 -
Error in Duplicate Content Being Reported - Pages Aren't Actually Duplicates
The recent crawl of one of our sites revealed a high number of duplicate content issues. However, when I viewed the report for pages with duplicate content I noticed almost all of them are not duplicates. For example, these two pages are marked as dupes:
Moz Bar | | M_D_Golden_Peak
https://www.writersstore.com/publishers/hollywood-creative-directory
https://www.writersstore.com/authors/g-miki-hayden These are thin as far as content goes but definitely not duplicates. Any recommendations or ways to adjust the settings so that these false positives aren't clogging up our site crawl report?0 -
Cannot Crawl ... 612 : Page banned by error response for robots.txt.
I tried to crawl www.cartronix.com and I get this error: 612 : Page banned by error response for robots.txt. I have a robots.txt file and it does not appear to be blocking anything www.cartronix.com/robots.txt Also, Search Console is showing "allowed" in the robots.txt test... I've crawled many of our other sites that are similarly set up without issue. What could the problem be?
Moz Bar | | 1sixty80 -
Moz crawler only crawls one page?!
Hello there, I'm using Moz for a while and I'm very pleased with the tool and community. But for the first time I encountered a problem. We are trying to run a crawler for a client's website but only one page (only the homepage) was crawled. We tried to do a test on a more detailed level (maybe there is something wrong with the homepage). My campaign test's crawl came back for the Producten folder (level deeper than homepage), and it was also only a 1 page crawl with a 200 status. I did look at the robots.txt file now, and it is very restrictive, but there is nothing that I can clearly see that would explain why the crawl isn't working. Hopefully someone can point us at the right direction. Thanks in advance, Jeremy
Moz Bar | | mediaxplain.nl0 -
Domain Authority vs Actual Results?
Hi. I know that MOZ's domain authority (DA) is an industry authority when it comes to evaluating the quality of a website. However, I've encountered something interesting in regards to a specific site: Digital Journal If you examine in through OSE you'd notice it has amazingly high DA - 83. But when you look at it through SEMRush you'd see that it is steadily dropping in rankings and accordingly traffic (lost 93% of traffic over the last year) which makes me believe that it got penalized. Shouldn't it be reflected on MOZ's analysis?
Moz Bar | | BeytzNet
Is it a site I should worry that points to me? This is an addition...
I encountered also the following site: americanchronicle.com which has the DA of 61 (pretty high) and is actually down for a while now Thanks0 -
Crawl Diagnostics - nofollow - reducing duplicate pages
Hi I'm looking at a crawl diagnostic report, I can see I have many duplicate pages, the reason for this is that when a brand filter is applied to a page. IE
Moz Bar | | chameleondm
www.mysite.com/mycategory - lets say this is the product listing page
www.mysite.com/category/mybrand - and this is the same page but with a brand filter applied
www.mysite.com/category/myotherbrand - and this is the same page but with a different brand filter applied I had intially appendeded the meta title, description and keywords with some extra content if a brand filter was applied, because the page on the whole does have different content. IE I would have a custom meta information, H1 tag and products on that page just for that specific brand.
However I am wondering if these two pages are really just competing with each other as lots of the content will be the same. Should I scrap that approach and use either nofollow on the brand filter link, or simply use a canonical. Thanks, James1