Welcome to the Q&A Forum

Browse the forum for helpful insights and fresh discussions about all things SEO.

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Woocommerce and individual category/product set-up

Technical SEO

522

Eoinfitz last edited by

Hi All,

Very new to SEO but trying to make small meaningful changes to wordpress site.

My question is whether it would be better for me to bypass this category page (http://liliglace.com.br/categoria-produto/personalizados/) (website is in Portuguese) and go straight to the underlying product pages by creating individual categories for each product.

I think this will increase SEO efficiency and clarity on the site with regard to these 3 products but I am worried about having a Woo-commerce category page with just one product page. I know that the plugin goes straight to the product page but is there a risk of duplicate content regarding the unused category page? Also long Urls! The Casamento (Wedding) category is already set up this way and same question applies.

Any help or guidence wold be greatly appreciated.

Thanks
1 Reply Last reply
Reply Quote 0
Eoinfitz @Cody_West last edited by

Thats great Cody thanks!
1 Reply Last reply
Reply Quote 0
Cody_West last edited by

You should be fine having one product under a category. To avoid duplicate content, you should use canonical URLs. Since you are using WordPress, you can use Yoast to accomplish this. If you haven't used canonical URLs before check out this guide. https://yoast.com/rel-canonical/

Hope that helps!
1 Reply Last reply
Reply Quote 1

Got a burning SEO question?

Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.

Start my free trial

Browse Questions

View

From

Sorted by

With category

Explore more categories

Related Questions

Magento Category Suffix - redirect issue

Hi All, Just launched a new Magento store & set the category suffix to blank & not .html or / So the desired url is https://www.example.com/category-1 But I am seeing a 301 redirect being implemented: https://www.example.com/category-1/ redirect to: https://www.example.com/category-1 I cant see this is the list of 301 redirects within the redirect panel in Magento but Moz & another redirect checker is picking it up. I am missing a setting or something ? Many Thanks,
Pat
Technical SEO | | PaddyM556

0
Migrating website to new CMS and to https://

Hi, We are migrating an old website to a new one built in Wordpress soon. We also added an SSL to change to https:// Most of the url's stay the same. Can we just migrate from http to https on server level, and for the url's that do change just set a 301 redirect? Or are there other things we should take into account?
Technical SEO | | Mat_C

0
When should a variant be a variant and when should it be a separate product from an SEO POV?

Hi all, We are looking at changing our current e-commerce store to a new platform and in doing so thinking of making some changes to how we list products in sub-categories. We have seen related questions asking about splitting a single product into multiple products to rank for different terms, but we are wondering about combining multiple products into a single product page? The examples we have seen have been about fashion items with variants of colour and size. However, the products we sell have variances that change the appearance, dimensions and technical specification, so we would like to ask the MOZ community if combining products with these variances would still be deemed good practice? We sell wood burning stoves and a good example of a product that we are considering combining is the Scan 85 stove, which is available in eight different configurations: 85-1, 85-2, 85-3 etc. Scan themselves refer to each version as a separate product and they are bought, stocked and sold as separate products. Wood burning stoves like this typically have a firebox in the centre and then design options that can change the top, side, base, door, colour and fuel. In this example, the firebox is the Scan 85 and the variation is the last number, each of which corresponds to a different design option changing both the appearance and dimensions (see attached image). We have them listed as eight different products on our current site, one for each version. Primarily because each option has its own name (albeit 1-digit difference) which when we created the pages we thought that more pages would present us with more ranking opportunity. However, we have since learnt that because these eight pages are all so similar and it is difficult to write unique content about each product (with the 85-1 and 85-2 the only difference between the models are the black trim on the 85-1 and the silver trim on 85-2). Especially as when talking about the firebox itself, how well the fire burns, how controllable it is etc, will be the same for all versions. Likewise, earning backlinks to eight separate pages is also very difficult. Exploring this lead, us to the question, when is a variant a variant and when is it a separate product? Are there hard and fast rules for what defines variants and products? Or does it simply vary from industry to industry product to product, and if so should we be looking at it from a UX or SEO POV, when making that decision? Our hope is that if we combine these eight products into a single high-quality page, it will present us with a greater ranking opportunity for that one page over eight individual pages. We also hope that in doing so will allow us to create a more intuitive UX on a single page with a unique description, more reviews focused on one page and an explanation of the options available, all of which should lead to more conversions. Finally, by creating a better UX and unique detailed description we hope that there is a higher chance of us earning product level backlinks then we do with eight lower quality pages. One of the issues in creating a single product page for all the variants is the sub-category/results pages, as we would be removing eight simple products and replacing them with one complex product. We have questions over how this would work from a filter/facet level whereby when you apply a filter there is an expectation that the image shown will match the criteria, so if we filter for stoves with a silver trim for example, there is an expectation to only see stoves that have a silver trim in the results. When you have separate product pages you have separate listings which makes this easier to only bring back the models matching the criteria. However, when you have a single page this is more complex as you will need a default image for non-filtered results and then the ability to assign an image to lots of different attributes so that the correct image is always shown that matches the criteria selected. All of which we have been assured is do-able but adds an extra level of complexity to the process from an admin side. The alternative to doing this would be to create eight simple/child products and link them to one configurable/parent product. We could them list the simple products into the results pages and have them all linking back to the main configurable product which could load with the options of the simple product that was selected. From an SEO POV this brings in some more work, redirecting each page to the parent, but ultimately this could provide a better UX and might be the better solution. Has anyone got any experience in doing either of these options before? Both options above with affect the number of products we have available, so does the number of products in a sub-category effect the ability for that category page to rank? We currently have around 500 products in our wood burning stoves category, with perhaps an additional 300 to add. If we go down the combining into a single product page route this will reduce the number of products by around a third. If we keep all the simple/child products, then this will stay around the same. So, have we missed something obvious? Is there a glaring issue that we have overlooked from an SEO point of view as well as from the customer experience? We would appreciate your thoughts on this. Thanks, Reece scan85-1.jpg
Technical SEO | | fireproductsuk

0
When to use mod rewrite / canonical / 301 redirect

Hello, I have taken over the management of a site which has a big problem with duplicate content. The duplicate content is caused by two things: Upper and lower case urls e.g: www.mysite.com/blog and www.mysite.com/Blog The other reason is the use of product filters / pagination which mean you can get to the same 'page' via different filters. The filters generate separate URLs. http://www.mysite.com/casestudy
http://www.mysite.com/casestudy/filter?page=1
http://www.mysite.com/casestudy/filter?solution=0&page=1
http://www.mysite.com/casestudy?page=1
http://www.cpio.co.uk/casestudy/filter?solution=0" Am I right to assume that for the case sensitive URLs I should use a 301 redirect because I only want the lower page to be shown? For the issue with dynamic URLs should we implement a mod-rewrite and 301 to one page? Any advice would be greatly appreciated.
Mat
Technical SEO | | Barques-Design

0
Blog.furnacefilterscanada.com/ or furnacefilterscanada.com/blog/

My shopping cart does not allow to instal a WordPress blog on a sub-domain like: furnacefilterscanada.com/blog/ But I can host my blog on another server with a sub-domain like: blog.furnacefilterscanada.com In a SEO point of view is there a difference between the 2? Link juice? Page authority? Thank you, BigBlaze
Technical SEO | | BigBlaze205

0
Help us define a category/product structure please

Hi, Apologies in advance for the long winded question... we need some guidance with our category/product/options structure in our shop. We primarily sell car parts and lots of our parts have multiple fitments for what is basically the same part. Some ranges can have 1,000s of products. We can't work out what is an appropriate level of information and granularity for our product structure.We recognise the importance of having fitments and specific terms in the product title and URL, but we also know that having loads of almost identical product pages is a definite negative and fragments our SEO potential. But where's the happy medium? For example, let's say we have a specific brand of brake pad (we'll call it Brako) with 4 different product-models (Super1, Super2, Super3, Super4), each fits 100 different cars, which are made by 10 different manufacturers. We have a few different ways of presenting/splitting up these 400 simple products: (ignore the URLs here, this is just to illustrate the browsing structure & likely product page titles) 1 category for the Brake Brand with 400 product pages inside, 1 product page for each specific combination of brake product-model and car-fitment. /Brako/Brako-Super1-brakes_BMW-M3.html 1 category, 400 product pages, 0 choices on each product page. 1 category for the Brake Brand with 40 products inside, 1 product for each specific combination of brake product-model and car-manufacturer. Each product page would then let you choose from a dropdown which of the 10 specific cars you had. /Brako/Brako-Super1-brakes_BMW.html 1 category, 40 product pages, 10 choices on each product page. 1 category for the Brake Brand with 4 sub-categories inside for the brake product-models with 100 products inside each, 1 product for each specific combination of car-fitment. /Brako/Brako-Super1-brakes/Brako-Super1-brakes_BMW-M3.html 1 category, 4 sub-categories, 40 product pages, 10 choices on the product page. 1 category for the Brake Brand with 4 sub-categories inside for the brake product-models, with 10 products inside each.1 product for each specific combination of brake product-model and car-manufacturer. Each product page would then let you choose from a dropdown which of the 10 specific cars you had. /Brako/Brako-Super1-brakes/brakebrand-Super1-brakes_BMW.html 1 category, 4 sub-categories, 40 product pages, 10 choices on each product page. 1 category for the Brake Brand with 4 products inside, 1 product for each brake product-model. Each product page would then let you choose from 2 dropdowns, each with 10 options: one for car manufacturer, the next for car model. /Brako/Brako-Super1-brakes.html 1 category, 4 product pages, 100 (10x10) choices on each product page. 1 product page containing options to choose all 400 Brako products using 3 drop down boxes: Car Manufacturer, Car Model and Product-Model /Brako/Brako-brakes.html 1 category, 1 product page, 100 (10x10) choices on each product page. Or we could mix it up and split the sub-categories by manufacturer: 1 category for the Brake Brand with 10 sub-categories (1 sub-category for each of the car manufacturers with 40 products inside each), 1 product page for each specific variation of car-fitment and product-model. /Brako/Brako-brakes-BMW/Brako-Super1-brakes_BMW-M3.html 1 category, 10 sub-categories, 40 product pages, 0 choices on the product page. 1 category for the Brake Brand with 10 sub-categories (1 sub-category for each of the car manufacturers with 10 products inside each), 1 product page for each specific variation of car-fitment. Drop dowjn box on the product page lets you choose product-model (Super1-4) /Brako/Brako-brakes-BMW/Brako-brakes_BMW-M3.html 1 category, 10 sub-categories, 10 product pages, 4 choices on the product page. 1 category for the Brake Brand with 10 sub-categories (1 sub-category for each of the car manufacturers with products inside each), 1 product page for each specific variation of product-model. /Brako/Brako-brakes-BMW/Brako-Super1-brakes_BMW.html 1 category, 10 sub-categories, 4 product pages, 10 choices on the product page. Obviously, option 1) is going to be the best search match for someone searching for 'BMW M3 Brako Super1 brakes' but that page will have almost identical content to 100 other pages and very similar content to a further 300 pages, which takes it's quality ranking down a lot. At the other end of the scale of complexity is option 5) which concentrates all search potential for the Brako Super1 down to a single page, which can be well written and have great content, but wouldn't have a match in the title, url or product name for anyone searching for 'BMW M3 Brako Super1 brakes'. 'BMW M3' would be mentioned in the page, but only once in a drop-down along with 100 other cars and possibly once in the content if there's something noteworthy about that application. So which option would you go for and why?
Technical SEO | | DWJames

0
Wordpress Category Archives

Wordpress question here. Can anyone tell me if there is an SEO advantage to creating a page filtered to show results from an individual category as opposed to simply linking to the category archive? The content is identical in both cases.
Technical SEO | | waynekolenchuk

0
Redirecting /default to domain ??

Google analytics shows me that this: http://www.quicklearn.com/default.aspx is my "top content page" This page doesn't redirect to my root domain: http://www.quicklearn.com IT tells me that "/default.aspx" can not redirect to my domain. I am told: "You can only redirect deeper into the site." We have had an ongoing issue with duplicate content (that we are in the process of correcting). Anyone with experience in redirecting that can help? Any advice welcome
Technical SEO | | QuickLearnTraining

0