Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Google Analytics: Different stats for date range vs single month?
-
I've been scratching my head, chin, and you name it over this one.
I have an advanced segment to remove bot traffic from my data. When I look at the Audience Overview data for a single month (let's say Aug). I am shown a session count.
No problems here, however If I set the date range to (January - August). The august monthly stats is incorrect, much lower. What this means is that, if I export a CSV report from Jan-Aug, the data is wrong compared to individually recording a month.
Anyone faced this? I've asked the question over at the Google Analytics technical section as well, but no answer
P.S I even used the 'control the number of sessions used to calculate this report' tool but no luck.
-
Google's pre-built filters are working fine for me (i.e. all sessions) and it's my bot filter when I view via a date range vs month only that is causing the confusion.
I got an answer from the google analytics technical page. There is a setting to exclude bot traffic, therefore avoiding the need to build custom segments.
You can do this for each profile so I've turned it on to test, let's see how my results turn out. If it removes the bot traffic automatically, then the date range wouldn't change. Here's how to do it:
Admin >> View Settings >> Bot Filtering (Click the Check Box) then the Save button. Done... no need for a dedicated segment.
-
I agree with Bendall that sampling is what is most likely causing your problem here. You may find this post useful: https://support.google.com/analytics/answer/1042498?hl=en-GB
I suspect that the reason that your sampled total closely matches the total of individually downloaded monthly data is because sampled data is Google's 'best guess' when the data in the date range becomes too large. This best guess is based on sound statistics, but ultimately there will be some variances. I've found these variances get bigger the larger your site and the larger your date range. Google do this to reduce load on their servers as crunching the numbers for large data sets can be very resource intense. You COULD upgrade to Google Analytics Premium which gives you un-sampled data as standard, but this is very expensive and only really suitably for large organisations.
There is no easy way round this I'm afraid. I'd suggest that you think about what level of data you are comfortably using - sampled data can still give you valuable insights / trends. Some are comfortable with using sampled data (I prefer now too). I believe there are some tools that allow you to download un-sampled data from Google Analytics via their API but I have not tried these.
-
I didn't know about this. I always thought the a data range would show the same data as the small range.
Strange thing is, If I note down each month's sessions individually and then add them up, they closely match the total session count my data range gives. Its just that my month data within the range that is wrong.
-
Are you sure the data in the larger date range is not being "Sampled". Always more dependable to add up smaller date ranges from my experience in the free version of GA, as if their is too much data to crunch it will take a sample and upscale it.
Regards
Ben
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Strange landing page in Google Analytics
Hello MOZ Community, The website in question is https://x-y.com/ When i looked at the landing pages report in GA , x-y.com is appended at the end of every URL like this. https://x-y.com/x-y.com When i open the above URL in GA interface, it shows page not found. This is obvious as there is no such URL.
Reporting & Analytics | Dec 1, 2019, 5:05 AM | Johnroger
The metrics like sessions, Users, Bounce rate all look good. In the property settings, The default URL is written like this http:// cell-gate.com (Please note that s is missing in property settings). But how is traffic tracked correctly How do i solve this problem. What settings should we change to make the landing pages report look ok Thanks0 -
How to exclude traffic for a specific mobile device in Google Analytics view?
Hi, Need help on how to exclude traffic for a specific mobile device in Google Analytics view. I have been searching and the only information available is excluding IP address of internal traffic. Is there any way to exclude traffic through a mobile MAC address?
Reporting & Analytics | Oct 26, 2016, 2:47 AM | Khadija_K0 -
Google Analytics SEO Queries Not Showing
Hi All, This might be a silly question, but for all the properties I monitor in Google Analytics, I'm now showing no data for SEO Queries under Acquisition for the past 6 days. Normally I would expect a few day delay in queries, but nothing for 6 days is somewhat peculiar especially as it was functioning fine prior to November 12th. Does anyone have insight into what might be going on? Thanks! URaNMa3
Reporting & Analytics | Jan 23, 2016, 5:27 AM | amichaels0 -
How does Google Maps/G+ traffic show up in Analytics?
Hi Moz Community, I've been trying to figure out how traffic from Google Maps (and G+) shows up in Google Analytics and am struggling to find a good answer online. If someone finds a business through Google Maps and then clicks on the website in the Maps listing, does that show up as a referral from Google Maps? Our site shows virtually zero traffic from Google Maps even though we have a number of listing. Two related questions: if someone clicks through to a G+ page from a Maps result and then visits our website from the G+ page, does that show up in Analytics as a referral from G+? Is traffic from Google Maps or G+ ALSO counted as organic traffic? (Would it be possible to accidentally double-count a visit as both organic and a referral from Maps/G+? Thanks everybody!
Reporting & Analytics | Aug 14, 2015, 2:29 PM | JohnGroves0 -
On google analytics what is Mozilla Compatible Agent under browser and OS?
On my Google Analytics (I know this is not SEOMOZ) I have a lot of visits from mozilla compatible agent with 100% bounce rate. Does anybody know what this is?
Reporting & Analytics | Apr 20, 2018, 11:08 AM | essentialworld0 -
How do I manually add transactions to Google Analytics
We are seeing Google Analytic's drop transaction on our site so therefore all the figures are skewed. Is there a way I can manually add transactions to GA to cover the missing one?
Reporting & Analytics | Feb 15, 2013, 11:49 AM | Towelsrus0 -
Localhost:4444 Showing Up in Google Analytics
Hello All, Lately in my Google Analytics account I have noticed a referral source labelled: localhost:4444 The number of visits is really high from this source, but I have no idea (no clue!) what it actually means. Can anyone shed some light on what this is about? Should I be creating some sort of filter to screen out this as a referral source (assuming it is not legitimate)? Many thanks in advance. Cheers!
Reporting & Analytics | Sep 13, 2012, 6:05 PM | Robert-B0 -
How to remove unwanted dynamic parameters from a URL in Google Analytics
Hi, Would really appreciate some help with this. I have been experimenting with RegEx to achieve this but as I’ve never used it before am currently failing miserably. We have conversion pages i need to set goals for that are formatted as below: https://www.domain.co.uk//Application_Form/(S(ewhbqp5cki0mppuzukunkqno))/enterCardDetails.aspx I need to remove the (s(xxx)) section from the URL as rather than one pages i currently have thousands of unique URL's. What’s catching me out is that as it’s not a URL parameter I can’t discount and as half way through can’t just do head matches etc to /entercarddetails Help would be much appreciated. Thanks.
Reporting & Analytics | Aug 23, 2012, 12:41 PM | Sarbs0