Best Day of Week & Best Time of Day for B+B Email
-
For business to business email, should we avoid sending on Mondays and Fridays? The nature of the service is commercial real estate brokerage for office space in New York City.
We are mailing to corporate decision makers in various industries (technology, finance, law). Should we avoid mailing during certain times of day? Or is there a best time of day to send the email.
Thanks,
Alan -
I'm in agreement with Kelly, and have seen a ton of success with this type of triggered email in ecommerce. We have set up clients so they'll receive not only cart abandonment and checkout abandonment emails, but also product and category abandonment emails. These have the highest conversion rate -- far beyond all typical marketing emails we send.
In B2B, perhaps one could do something similar with an abandonment email -- but for a particular service. Something along the lines of "Still interested in service xyz?" with an email showing top examples and best alternatives or pairings below. Something you could consider, and as advised above, test out.
Best of luck!
Zack
-
I completely agree with Michael - triggered emails are great, but only when they add significant value.
They tend to work best in eCommerce where you know the user has intent to purchase and where that decision is a quick one.
To follow your example, if your first email was an office rental in Manhattan, then you may want to follow up alternatives to those customers that clicked on the email as they're likely to be interested.
You could then segment your audience based on their potential location-based needs - which would then allow you to send them more tailored emails. This is especially great if your email platform allows you to add conditional content?
As for sending follow up if your recipient opens the email, I'd personally say no, unless you're reminding them of a time-limited offer. We also find that sending to those who unopened the email has about 1/2 the engagement level of the first email if that's useful for you to know!
It's all worth testing in your own environment though as what works for one business won't work for another. Try testing the engagement levels when you send 2 emails a month to see if it increases conversions. 2 emails a month isn't going to offend people or make people actively unsubscribe unless you've send them really close together.
Hope that adds to Micahels response.
-
Alan,
Triggered emails can be very effective when done right, the key I have found is making sure that your follow up email provides your potential client with value (not money or a discount, just value). A
As for to many emails, you should be able to cap your send frequency to people so that you do not get excessive. I try not to send more than 2 emails a week and only if the person does a high value action or specifically requests it.
When you first start sending emails (especially if you have not been using this list regularly) you will see a larger amount of unsubscribes, this is normal anytime you start getting in front of customers more often, don't worry, the people unsubscribing from 1-2 monthly emails were not going to become customers. Really what it comes down to is you will need to feel out your niche, some industries it is great to do weekly sends, others once a month can be to much.
-
Thank you Kelly and Michael for these excellent answers to my query.
Another related question: if a recipient clicks on a product pages (an office rental in Manhattan) and goes to my website, I have the ability to send them an automated email once they click the link or even several hours afterwards. Will doing so increase my conversion rate? If I do not set this feature up, am I missing a key opportunity?
Also, the package I am working with allows me to send a follow up email if the recipient opens the my promotional email. Is it best practices to set this up?
I don't want to harass of spam any potential customer. At the same time I don't want to miss an opportunity. So what is best practices?
Note I have a mailing list of about 12,000 and intend to send emails targeted by industry during about 10 business days a month. Don't want to send more than one mailer a month to each recipient, scared they will opt out if I over do it.
Any thoughts????
Thanks, Alan
-
Alan,
I work with a number of different B2B companies that use email marketing regularly. You are correct that Mondays and Fridays are bad days to send as we have done a good amount of send time testing and those days always perform poorest. We have found, across almost all of our clients, that Tuesdays between 11am-1pm EST are the best time to send in the US for our clients, but as Kelly mentioned, you should conduct your own tests to find out when your audience is best engaged.
-
Hi!
I work in a B2B and we never send emails on a Monday or Friday - they don't get the engagement or open rate as compared to sending on other days.
A quick way of finding out the right day for you is to check your Google Analytics. What days and times is your site most popular? I'd go for that time to start with.
We find that 10am and 2pm are great for our business but that may be different for you. We've confirmed this through testing too.
I'd say, start by checking the right time/day on GA, then move onto testing. Split your group (if you send to more than 1k subscribers) and see which time they engage with most. Send half at one time and half at another. You'll then get a good answer for your business as to the best time and day to send.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Best to Include Phone Number as CTA Button in Mobile Version of B+B Web Site?
We are attempting to keep the number of CTAs (Calls to Action) on our commercial real estate website to a minimum. Our adjusted design (see attached) has 2 CTAs. One is "Contact Agent" the other is "Schedule a Tour". We are focusing on the listing page, which is the primary product page and critical in terms of CTA. Our mobile version does not show a phone number while the desktop version (also attached) displays a phone number. Should the mobile version also display a button a phone number? Some members of our target audiences, business owners and executives who are often in their 40s and 50s may prefer to call us up rather than communicate by written message. Any suggestions for elegantly displaying the phone number without causing confusion? I have read that the number of CTAs should be limited so I am on the fence as to whether or not to include a phone number Thanks,
Conversion Rate Optimization | | Kingalan1
Alan 6yR88Vt WwYpt810 -
Photos or Video Best for Landing Pages?
My real estate brokerage firm is promoting a listing via advertising on LinkedIn. The advertising links to a landing page: http://www.nyc-officespace-leader.com/MidtownLawOfficeSublet3300SFBelowMarket Rather than photos, the landing page has a 1 minute video. So far we have had about 10 visits to the page. Visitors leave the landing page after a few seconds. So they are not looking at the video. Would it be better to replace the video with photos? Or is engagement generally better with video? My thinking is that business owners may not have the patience or the time for a video and they would more likely have the time and willingness to click on photos. I would be willing to test this further, but at $5/click it could get costly! Any thoughts?
Conversion Rate Optimization | | Kingalan1
Thanks,
Alan Rosinsky1 -
IE & Edge issues with site relaunch - advice appreciated
Hi, I've been involved in a major ecommerce site relaunch, redesign and backend and have been involved in several successful ones before. On the whole things have gone great. Of course there are some minor bugs to fix, rendering issues etc but my real concern is a significant decline in conversion rate BUT only for IE and Edge users. All other major browsers conv rate has increased. Trawling through analytics and the site itself in those browsers there is no obvious sticking points e.g bounce rate has improved on all browser inc IE & Edge, no particular point in the funnel is suffering more than others, no particular page or landing page is doing much worse than others etc. it just seems like all the kpi's (except bounce) are down a little on the 2 microsoft browsers, which has a significant impact. One of the things that changed on relaunch is that we moved to https and im wondering if that might be causing an issue with IE / Edge security or privacy settings or that functionality on the site that relies on cookies is being affected, though in testing we haven't come across anything. I'd appreciate any advice or insight. Thanks, Andy
Conversion Rate Optimization | | AndyMacLean0 -
Have My SEO Cake & Eat It - Mix Viral Content & Business Content?
Hello, I optimize for a fashion, eCommerce site which has catalogue pages and product pages. http://www.zando.co.za/ We're currently working on a large "blog" which tons of great content designed to attract readers, links and tons of long tail traffic. We'll be doing how-to videos, celeb interviews, top-tens, etc. etc. We'll even have a UGC community section eventually. Really great. Now, I want to use the links generated by this section to rank for generics like this: For example: I want to rank for "Lingerie" and I have this page set up as the target: http://www.zando.co.za/women/clothing/lingerie/ I create some amazing content that generates lots of links containing the word "lingerie" . That awesome content lives in:(hypothetical URL:) http://www.zando.co.za/fashion/magazine/how-lingerie-has-changed-over-50-years/ I want to (and this is where you come in 😉 get people linking to my catalogue page (http://www.zando.co.za/women/clothing/lingerie/) where they can find a banner or something alluding to that piece of link bait (the /fashion/magazine/ url). Perhaps similar to the Wordpress style <read more="">page break on posts?</read> Reason is, I want my "Money-Page" to get the links with "Lingerie" in it. Problem is, it'll be another click to the thing they want to find. Also, say I decide a few months later that I want to do another piece, like "lingerie in films" and do the same. My 'banner' idea would get very crowded or, it would mean that I bump the 50-years piece, which then makes for bad UX for readers clicking through looking for the old piece. Or perhaps this can all be solved with good design? Here's a WBF talking about mixing content: http://www.seomoz.org/blog/mixing-viral-content-with-business-content-whiteboard-friday Does anyone have an example of someone doing this well? PS. Was also thinking that on my "archive'' url, in between the content, I'll query for the top products that, that piece speaks to and make it possible for people to add to cart as they're reading the link bait content that is relevant to the product. Cheers Paul.
Conversion Rate Optimization | | RocketZando0 -
What is the best solution to track conversions on local plumbing site (non-mobile)?
What is the best solution to track conversions on our local plumbing site? 95% of leads coming from phone calls, the rest – from the contact form we have on every page. Is there a reliable solutions to track conversion rate for non-mobile local site? As a side note, we have 6 different phone numbers on our site that users can call in order to reach us.
Conversion Rate Optimization | | dinok_ya0 -
What's the Best Method of Content Distribution
This question is both specific and open ended. I have a new web project I've been working on content for. I paid to have a really sweet research article written and I am in the process of turning it into an info-graphic as well. Being that the the website is so new it doesn't have many customers and few to no blog readership. Now that I will soon have great content for the site should I : A. Post on the Blog ? ( Its a Blogger on a blog. domain.com ) B. Post as a static page on the website ? (domain.com/content) C. Something Else ? Whats the easiest to promote and push traffic to?
Conversion Rate Optimization | | CDUBP
Which will rank best?
Which will rank longer?
Which will rank faster? Any other suggestions to get the content in front of the niche market?0 -
Page Speed & SERPS
What impact does page speed have on rankings in the search engine? If I have a Site that is heavy with Pictures, Onsite videos and various scripts that would ultimately be of good use to a viewer but takes time to load. VS A Site that has pictures that are fully optimized for the web or eliminated to save on load time, Videos that are hosted on Sites like VIMEO or You Tube and eliminate scripts where possible and use css3. Note the site loads faster and is better for mobil but doesn't have the same feel of the first site but is useful to the user. Now let's say that both sites are virtual twins in terms of their link profile, age, content quality, location and citations. Will one rank better because of load time? It's the quest for creating the ultimate site for users while delivering it within the fastest time possible.
Conversion Rate Optimization | | bronxpad0 -
Time spent downloading a page increased drasticly
Hi Guys, We have found increased "Time spend downloading a page" drastically. Our website: www.learnenglishindublin.com Our company is located in Ireland, so we moved our servers from US to Ireland at the beginning of December. Also before increasing 'Time spend downloading a page" I did: I have installed plugins JCH Optimize (plugin is optimizing CSS and Javascripts [merging them]) I have installed ScriptsDown - which is moving all scripts to bottom of site. Pingdom tools shows that site is loading average of 2.7 secs. Pages are cached. Gzip is used. Our SEO rankings dropped from 1 page to 2 page. We have gone up in Google Maps search. Image sizes are about 1.7MB Any idea how things have actually gotten worse after this “improvement”? Thanks, Olivia increased.jpg
Conversion Rate Optimization | | Olivia_led0