Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Is there a way to filter all computers on a specific IPv6 network in Google Analytics?
-
Is there a quick way of filtering the IP addresses for all the computers on a network that's using IPv6? I want to filter out visits to our websites from the devices on our office network, but each computer (and phone and tablet) seems to have a different address. It _looks _like they all start the same way, though. One computer is xxxx:xxxx:xxxx:xxxx:aaaa:aaaa:aaaa:aaaa, another is xxxx:xxxx:xxxx:xxxx:bbbb:bbbb:bbbb:bbbb, my phone is xxxx:xxxx:xxxx:xxxx:cccc:cccc:cccc:cccc, etc.
Does this mean that xxxx:xxxx:xxxx:xxxx is the address for our network as a whole, and I can just set up a Google Analytics filter for "IP addresses starting with..."? Or would doing that also filter out hits from, like, every visitor within a 20 mile radius of our office?
If I need to simply put in the individual addresses for each and every device, I will. I'm just hoping it doesn't come to that.
Thanks!
-
It looks like you've identified a common prefix in the IPv6 addresses on your office network, which is a good start. However, keep in mind that the first part "xxxx:xxxx:xxxx:xxxx" is just a subnet identifier, and devices within that subnet will have different addresses for the remaining sections.
To filter out visits from your office network in Google Analytics, you can use the "IP addresses starting with..." approach, but make sure to include the common prefix specific to your office subnet. For example, if your office network is identified by "xxxx:xxxx:xxxx:xxxx," you can set up a filter for "IP addresses starting with xxxx:xxxx:xxxx:xxxx." This should help you isolate visits from devices within your office network without affecting others in the vicinity.
-
Ah, that makes sense. I'll look into how our network is set up.
Thanks!
-
Those individual machine IP addresses are for identifying the computers to each other and to the server inside your network (called the LAN or Local Area Network). The IP address you need to block in Google Analytics is the one that connects the LAN to the outside internet. Unless your network has an unusual setup, using the browser of any computer or device connecting to the network (including phones using WiFi) to type "what is my IP" into the address bar will return the same IP address for the all the machines inside the network. (Large companies occasionally have multiple outside connections, but it doesn't sound like that's what you're dealing with.)
In addition, most commercial internet connections use static IP addresses so the IP "shouldn't" change, but anytime major changes or outages occur, it's a good idea to doublecheck the IP address to be sure it's stayed the same.
Make sense?
Paul
Sidenote: this is one of the main security purposes of a router. It routes all those internal machines' connections out to the internet through a single IP address, so the nasties out on the internet don't have access to an IP address for an individual machine that they can use to direct attacks against it. Thus the network admin only has to protect one device from direct attack from the nastyweb - the router - instead of having to protect every machine individually.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Can you arrange Google Analytics source/medium traffic by percentage change?
I'm doing a year to year traffic audit for a client. I would like to analyze Google Analytics source/medium traffic by percent change. Is there a way to do this? Do I have to create a custom variable? 9BH70RO
Reporting & Analytics | | VanguardCommunications0 -
Google Analytics Real Time Not Working! :(
Hello Everyone, Today, the real time feature in my google analytics stopped working. I am able to see that traffic is visiting my site, but not in real time. The real time count is usually at 0. But, there are some instances where real time will come back online, but there will be only 1 unique visitor. At any given time, our website usually has 20 visitors or so..Has anyone encountered this issue? Where should i start looking for fixes? What are the possible problems? Thanks!
Reporting & Analytics | | KarlMarxTheBear0 -
Google Analytics shows most referrers as "Direct" -- What are some better tools?
Very often Google Analytics will show 50-90% of our referrers as (direct) which is not very helpful. Are there other tools out there that will provide a clearer breakdown of what other websites are sending us our traffic? Specifically, I want to be able to be able to tell who are the top traffic referrers to my top performing pages on my site for the last 30 days. (I want to be able to study this on a per-page basis.) Thanks in advance!
Reporting & Analytics | | Brand_Psychic0 -
Referral Traffic vs. Campaign Traffic in Google Analytics
I have two sites: a blog and an ecommerce site. The blog funnels people to the ecommerce site. In Analytics I'm seeing declines in referral traffic from the blog to the ecommerce site. During the same time I'm seeing an increase in campaign traffic to the ecommerce site, with most campaign traffic coming from the blog. I believe the increase in campaign traffic is largely a result of simply having installed more tracking links. This leads me to believe that the declines I'm seeing in referral traffic is simply a result of the increase in campaign traffic. In other words, what was once counted and reported as being referral traffic is now being counted and reported as campaign traffic. So my question is this: In Google Analytics is campaign traffic ALSO reported as referral traffic, or is campaign traffic reported separately and not duplicated in referral traffic reports? I'll provide a concrete example to make this more clear in case it isn't: Say site X sends 1000 visits each month to site Y. Say 50 of those visits come from a single link on X. If that link is changed so that campaign Z data info added (via the Google URL Builder), would you expect to then see 950 referral visits each month from site X to site Y plus 50 campaign visits to site Y via new campaign Z, or would you continue to see 1000 referral visits plus the new 50 campaign visits? Many thanks in advance to anyone that can shed some light on this.
Reporting & Analytics | | aaronprimal0 -
Why is Google Analytics showing index.php after every page URL?
Hi, My client's site has GA tracking code gathering correct data on the site, but the pages are listed in GA as having /index.php at the end of every URL, although this does not appear when you visit the site pages. Even if there is a redirect happening for site visitors, shouldn't GA be showing the pages as their redirect destination, i.e. the URL that visitors actually see? Could this discrepancy be adversely affecting my search performance? Example page: http://freshstarttax.com/innocent-spouse/ shows up in GA as http://freshstarttax.com/innocent-spouse/index.php thanks
Reporting & Analytics | | JMagary0 -
How to remove unwanted dynamic parameters from a URL in Google Analytics
Hi, Would really appreciate some help with this. I have been experimenting with RegEx to achieve this but as I’ve never used it before am currently failing miserably. We have conversion pages i need to set goals for that are formatted as below: https://www.domain.co.uk//Application_Form/(S(ewhbqp5cki0mppuzukunkqno))/enterCardDetails.aspx I need to remove the (s(xxx)) section from the URL as rather than one pages i currently have thousands of unique URL's. What’s catching me out is that as it’s not a URL parameter I can’t discount and as half way through can’t just do head matches etc to /entercarddetails Help would be much appreciated. Thanks.
Reporting & Analytics | | Sarbs0 -
How can I verify if someone is Google Analytics certified?
I am looking to hire an IC to help with analytics. I need to know how I can verify if they are GA certified. They gave me a link to a http://www.starttest.com profile. Is that legit?
Reporting & Analytics | | inhouseseo0 -
Setting Up Google Analytic with Sub Folder Sites
What is the best way of setting up Google Analytic for a website that has many sub folders? The main site is example.com and it has 40 sub folder sites like example.com/uk example.com/France etc etc Would it be advised to track a single domain in Google Analytic then create filters for the sub folder sites. Filters > Include traffic from > Sub directories Also with this method is it possible to view overall incoming website stats for everything? Previous experience would be great with this thanks 🙂
Reporting & Analytics | | daracreative0