Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Special characters in URL
-
Will registered trademark symbol within a URL be bad? I know some special characters are unsafe (#, >, etc.) but can not find anything that mentions registered trademark.
Thanks!
-
Jen - I agree with Eli. It's best not to use the TM symbol in a URL string - it will confuse the end user when it's URL encoded and scrambled. Rather, put the mark on your pages and in images.
If you have gone through the registration process with the USPTO (United States Patent and Trademark Office), you should be using the
symbol next to your mark, and not the TM symbol.
According to the Trademark FAQs on the USPTO site: http://www.uspto.gov/faq/trademarks.jsp#_Toc275426682
Do federal regulations govern the use of the designations "TM" or "SM" or the
symbol?
If you claim rights to use a mark, you may use the "TM" (trademark) or "SM" (service mark) designation to alert the public to your claim of a “common-law” mark. No registration is necessary to use a "TM" or "SM" symbol and you may continue to use these symbols even if the USPTO refuses to register your mark. Those symbols put people on notice that you claim rights in the mark, although common law doesn't give you all the rights and benefits of federal registration.
You may only use the federal registration symbol "
" after the USPTO actually registers a mark, not while an application is pending. And it may only be used on or in connection with the goods/services listed in the federal trademark registration and while the registration is still alive (you may not continue to use it if you don’t maintain the registration or it expires). Although there are no specific requirements on where the symbol should be placed relative to the mark, most businesses use the symbol in the upper right corner of the mark. Note: Because several foreign countries use “
” to indicate that a mark is registered in that country, use of the symbol by the holder of a foreign registration may be proper.
From another section_: There are no specific requirements on where the “
” symbol should be placed relative to the mark, but most businesses use the symbol in the upper right corner of the mark._
Hope this helps!
-- Jeff -
Jen,
I'm not sure if it will be bad based on research, but based on what you aim for in a URL (clarity, what the article is about, user experience, descriptive keywords, etc...) the TM Registered may not fit well.
Plus, be careful, your TM (if using symbols) will get changed to
(
) or
(
) in the URL - making it less user friendly to type in (let alone look at)..
Hope this Helps!
Eli Overbey
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Topic Cluster: URL Best Practices
I'm trying to be mature and employ the Topic Cluster strategy to my content. In doing so I realized there are a few URL options. Some more difficult to execute than others. -Is it important to call out the Pillar Topic in your subtopic URL?
Technical SEO | | dkellyagile
-Does the Pillar Topic need to have its own landing page? (As opposed to just being part of the blog.) Here's an Example: My Pillar is: Inbound vs. Outbound
My subtopic is: Marketing Platforms Here are the URL options I can think of... Option 1: https://pipelineinbound.com/blog/inbound-vs-outbound-marketing-platforms/ Option 2: https://pipelineinbound.com/blog/which-marketing-platforms/ Option 3: https://pipelineinbound.com/blog/marketing-platforms-inbound-vs-outbound/ Option 4 (Hardest): https://pipelineinbound.com/inbound-vs-outbound/marketing-platforms/ Are there some fundamental best practices for URL structure and Link Building as it pertains to Topic Clusters? Thanks!0 -
Vanity URLs are being indexed in Google
We are currently using vanity URLs to track offline marketing, the vanity URL is structured as www.clientdomain.com/publication, this URL then is 302 redirected to the actual URL on the website not a custom landing page. The resulting redirected URL looks like: www.clientdomain.com/xyzpage?utm_source=print&utm_medium=print&utm_campaign=printcampaign. We have started to notice that some of the vanity URLs are being indexed in Google search. To prevent this from happening should we be using a 301 redirect instead of a 302 and will the Google index ignore the utm parameters in the URL that is being 301 redirect to? If not, any suggestions on how to handle? Thanks,
Technical SEO | | seogirl221 -
Is it Detrimental to Repeat a Word in Our URL?
Hey guys! We run a tour company in Barcelona. Our company name is Barcelona Experience. We're customizing our URL's to include keywords which can be found in all the important areas on the page (title tage, meta descp., etc).
Technical SEO | | BarcelonaExperience
We want to change "www.barcelonaexperience.com/bike-tours" to "www.barcelonaexperience.com/barcelona-bike-tours"
We're worried the repetition of "barcelona" could be a bad thing. True, or not true? Thanks!0 -
URL - Well Formed or Malformed
Hi Mozzers, I've been mulling over whether my URLs could benefit a little SEO tweaking. I'd be grateful for your opinion. For instance, we've a product, a vintage (second hand), red Chanel bag. At the moment the URL is: www.vintageheirloom.com/vintage-chanel-bags/2.55-bags/red-2.55-classic-double-flap-bag-1362483150 Broken down... vintage-chanel-bags = this is the main product category, i.e. vintage chanel bags 2.55-bags = is a sub category of the main category above. They are vintage Chanel 2.55 bags, but I've not included 'vintage' again. 2.55 bags are a type of Chanel bag. red-2.55-classic-double-flap-bag = this is the product, the bag **1362483150 **= this is a unique id, to prevent the possibility of duplicate URLs As you no doubt can see we target, in particular, the phrase **vintage. **The actual bag / product title is: Vintage Chanel Red 2.55 classic double flap bag 10” / 25cm With this in mind, would I be better off trying to match the product name with the end of the URL as closely as possible? So a close match below would involve not repeating 'chanel' again: www.vintageheirloom.com/chanel-bags/2.55-bags/vintage-red-2.55-classic-double-flap-bag or an exact match below would involve repeating 'chanel': www.vintageheirloom.com/chanel-bags/2.55-bags/vintage-chanel-red-2.55-classic-double-flap-bag This may open up more flexibility to experiment with product terms like second hand, preowned etc. Maybe this is a bad idea as I'm removing the phrase 'vintage' from the main category. But this logical extension of this looks like keyword stuffing !! www.vintageheirloom.com/vintage-chanel-bags/vintage-2.55-bags/vintage-chanel-red-2.55-classic-double-flap-bag Maybe this is over analyzing, but I doubt it? Thanks for looking. Kevin
Technical SEO | | well-its-1-louder0 -
Vanity / Short URLs 301?
Hi everyone, I'm working on a website that uses a lot of short urls eg http://www.forest.com/oaktrees. A quick check reveals these are currently 302 status. My question is should these be made 301s - a lot of them are in off-page content and looking at GA attract a lot of clicks. I've not managed to see a definitive answer to this after several Google searches. All help and advice greatly appreciated. Bw Jon
Technical SEO | | CoL-PR0 -
Optimal Structure for Forum Thread URL
For getting forum threads ranked, which is best and why? site.com**/topic/**thread-title-goes-here site.com**/t/**thread-title-goes-here site.com**/**thread-title-goes-here I'd take comfort in knowing that SEOmoz uses the middle version, except that "q" is more meaningful to a human than "t". The last option seems like the best bet overall, except that users could potentially steal urls that I may want to use in the future. My old structure was site.com/forum/topic/TOPIC_ID-thread-title-goes-here so obviously any of those would be a vast improvement, but I might as well make the best choice now so I only have to change once.
Technical SEO | | PatrickGriffith0 -
Should me URLs be uppercase or lowercase
I'm in the middle of doing a bunch of 301 redirects for me site. Should I make them Lowercase, uppercase, or does it matter? Also, do I want to be using hyphens (-), or underscores (_)? Any other tips? EX: http://www.stupid.com/golf-slippers.html OR http://www.stupid.com/Golf-Slippers.html
Technical SEO | | JustinStupid0 -
Double byte characters in the URL - best avoided?
We are doing some optimisation on sites in the APAC region, namely China, Hong Kong, Taiwan and Japan. We have set the url generator to automatically use the heading of the page in the URL which works fine for countries using Latin characters, but is causing problems, particularly in IE, when it comes to the double byte countries. For some reason, IE struggles with double byte and displays URLs in their rather ugly, coded form. Anybody got any suggestions on whether we should persist with the keyword URLs or revert to the non-descriptive URLs for the double byte countries? The reason I ask is it's a balance of SEO benefit vs not scaring IE users off with ugly URLs that look dreadful and spammy.
Technical SEO | | Red_Mud_Rookie0