Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Special characters in URL
-
Will registered trademark symbol within a URL be bad? I know some special characters are unsafe (#, >, etc.) but can not find anything that mentions registered trademark.
Thanks!
-
Jen - I agree with Eli. It's best not to use the TM symbol in a URL string - it will confuse the end user when it's URL encoded and scrambled. Rather, put the mark on your pages and in images.
If you have gone through the registration process with the USPTO (United States Patent and Trademark Office), you should be using the
symbol next to your mark, and not the TM symbol.According to the Trademark FAQs on the USPTO site: http://www.uspto.gov/faq/trademarks.jsp#_Toc275426682
Do federal regulations govern the use of the designations "TM" or "SM" or the
symbol?If you claim rights to use a mark, you may use the "TM" (trademark) or "SM" (service mark) designation to alert the public to your claim of a “common-law” mark. No registration is necessary to use a "TM" or "SM" symbol and you may continue to use these symbols even if the USPTO refuses to register your mark. Those symbols put people on notice that you claim rights in the mark, although common law doesn't give you all the rights and benefits of federal registration.
You may only use the federal registration symbol "
" after the USPTO actually registers a mark, not while an application is pending. And it may only be used on or in connection with the goods/services listed in the federal trademark registration and while the registration is still alive (you may not continue to use it if you don’t maintain the registration or it expires). Although there are no specific requirements on where the symbol should be placed relative to the mark, most businesses use the symbol in the upper right corner of the mark. Note: Because several foreign countries use “
” to indicate that a mark is registered in that country, use of the symbol by the holder of a foreign registration may be proper.From another section_: There are no specific requirements on where the “
” symbol should be placed relative to the mark, but most businesses use the symbol in the upper right corner of the mark._Hope this helps!
-- Jeff -
Jen,
I'm not sure if it will be bad based on research, but based on what you aim for in a URL (clarity, what the article is about, user experience, descriptive keywords, etc...) the TM Registered may not fit well.
Plus, be careful, your TM (if using symbols) will get changed to
(
) or
(
) in the URL - making it less user friendly to type in (let alone look at)..Hope this Helps!
Eli Overbey
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
How do I customize Magento product urls?
I would like my product urls to be /category/manufacturer/name/part#. This would be the only url the item uses and how the product is accessed. It would also be used for product feeds. My first attempt was to use https://amasty.com/magento-unique-product-url.html This creates a single url but I can not customize it. Sometimes it selects the manufacturer and sometimes the category. My second attempt was with https://www.magentocommerce.com/magento-connect/custom-product-urls-seo.html I have it installed but it doesn't change the urls. Has anyone been able to do this successfully?
Technical SEO | | Tylerj0 -
Vanity URLs are being indexed in Google
We are currently using vanity URLs to track offline marketing, the vanity URL is structured as www.clientdomain.com/publication, this URL then is 302 redirected to the actual URL on the website not a custom landing page. The resulting redirected URL looks like: www.clientdomain.com/xyzpage?utm_source=print&utm_medium=print&utm_campaign=printcampaign. We have started to notice that some of the vanity URLs are being indexed in Google search. To prevent this from happening should we be using a 301 redirect instead of a 302 and will the Google index ignore the utm parameters in the URL that is being 301 redirect to? If not, any suggestions on how to handle? Thanks,
Technical SEO | | seogirl221 -
How do I deindex url parameters
Google indexed a bunch of our URL parameters. I'm worried about duplicate content. I used the URL parameter tool in webmaster to set it so future parameters don't get indexed. What can I do to remove the ones that have already been indexed? For example, Site.com/products and site.com/products?campaign=email have both been indexed as separate pages even though they are the same page. If I use a no index I'm worried about de indexing the product page. What can I do to just deindexed the URL parameter version? Thank you!
Technical SEO | | BT20090 -
Should the date be included in news URLs
My website is not a news or magazine site, but we do have a news section updated 2-3 times a week with industry related news. We are working on a new structure for the URLs.
Technical SEO | | theLotter
Should the date be included in the URL? From this article from Google I understand that as long as we submit a news sitemap it doesnt matter whether or not numbers are included in the URL, correct? https://support.google.com/news/publisher/answer/68323?topic=116650 -
Landing Page URL Structure
We are finally setting up landing pages to support our PPC campaigns. There has been some debate internally about the URL structure. Originally we were planning on URL's like: domain.com /california /florida /ny I would prefer to have the URL's for each state inside a "state" folder like: domain.com /state /california /florida /ny I like having the folders and pages for each state under a parent folder to keep the root folder as clean as possible. Having a folder or file for each state in the root will be very messy. Before you scream URL rewriting :-). Our current site is still running under Classic ASP which doesn't support URL rewriting. We have tried to use HeliconTech's ISAPI rewrite module for IIS but had to remove it because of too many configuration issues. Next year when our coding to MVC is complete we will use URL rewriting. So the question for now: Is there any advantage or disadvantage to one URL structure over the other?
Technical SEO | | briankb0 -
Ok to Put a Decimal in a URL?
I'm in the process of creating new product specific URLs for my company. Some of our products have decimals in them for their names as a unit of measurement. For example - .The URL for a 050" widget would be something like: http://www.example.com/product/category/.050-inch-widget My question is - Can I use a decimal in the URL without ticking off the search engines, and/or causing any other unexpected effects?
Technical SEO | | CodyWheeler0 -
Double byte characters in the URL - best avoided?
We are doing some optimisation on sites in the APAC region, namely China, Hong Kong, Taiwan and Japan. We have set the url generator to automatically use the heading of the page in the URL which works fine for countries using Latin characters, but is causing problems, particularly in IE, when it comes to the double byte countries. For some reason, IE struggles with double byte and displays URLs in their rather ugly, coded form. Anybody got any suggestions on whether we should persist with the keyword URLs or revert to the non-descriptive URLs for the double byte countries? The reason I ask is it's a balance of SEO benefit vs not scaring IE users off with ugly URLs that look dreadful and spammy.
Technical SEO | | Red_Mud_Rookie0 -
Why google index my IP URL
hi guys, a question please. if site:112.65.247.14 , you can see google index our website IP address, this could duplicate with our darwinmarketing.com content pages. i am not quite sure why google index my IP pages while index domain pages, i understand this could because of backlink, internal link and etc, but i don't see obvious issues there, also i have submit request to google team to remove ip address index, but seems no luck. Please do you have any other suggestion on this? i was trying to do change of address setting in Google Webmaster Tools, but didn't allow as it said "Restricted to root level domains only", any ideas? Thank you! boson
Technical SEO | | DarwinChinaSEO0