Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Canonical issues using Screaming Frog and other tools?
-
In the Directives tab within Screaming Frog, can anyone tell me what the difference between "canonicalised", "canonical", and "no canonical" means? They're found in the filter box. I see the data but am not sure how to interpret them. Which one of these would I check to find canonical issues within a website? Are there any other easy ways to identify canonical issues?
-
Hello
I spotted this thread and was just about to reply, but Dirk has answered it all perfectly. Thanks Dirk!
Under 'reports' there's also a 'canonical errors' report which will show canonicals with various technical issues - Those that are blocked by robots.txt, have no response, 3XX redirect, 4XX or 5XX error (essentially anything other than a 200 ‘OK’ response). It will also show any URLs discovered only via a canonical, that are not linked to internally from the sites own link structure (in the ‘unlinked’ column when ‘true’).
Hope that helps anyway.
Cheers!
Dan
-
Hi,
The difference between them
-
canonical : url has a canonical url - which can be self-referencing (canonical url = url) or not
-
canonicalised: url has a canonical url which is not self-referencing (canonical url <> url)
-
no canonical : quite obvious - the url has no canonical.
Potential issues could be - url's that you would like to have a canonical don't have a canonical or url's that are canonicalised don't have the right canonical url. You can use the lists (both canonicalised & no canonical) from Screaming Frog to check them - but it's up to you to judge whether the canonical is ok or not (no automated tool can guess what your intentions are).
Typical mistakes with canonicals: all url's have the same canonical url (like the homepage), or have canonical url's that do not exist. You could also check this with Screaming Frog using the setting "respect canonicals" - this way only the canonical url's will be shown in the listing.Also keep in mind that canonical url's are merely a friendly request to Google to index the canonical rather than the normal url - but it's not an obligation for Google to do this (check https://support.google.com/webmasters/answer/139066?hl=en quote: "the search results will be more likely to show users that URL structure. (Note: We attempt to respect this, but cannot guarantee this in all cases.)"
Dirk
-
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Canonical or hreflang?
I have four English sites for four different countries, UK, Ireland, Australia and New Zealand and I want to share some content between the sites. On the pages that share the content, which is essentially exactly the same on all 4 sites, do I use the hreflang tags like: or do I add a canonical tag to the other three pointing to the "origin", which would be the UK site? I believe it is best practice to use one or the other, but I'm not sure which make sense in this situation.
Technical SEO | | andrew-mso0 -
Canonical Tag when using Ajax and PhantomJS
Hello, We have a site that is built using an AJAX application. We include the meta fragment tag in order to get a rendered page from PhantomJS. The URL that is rendered to google from PhantomJS then is www.oursite.com/?escaped_fragment= In the SERP google of course doesnt include the hashtag in the URL. So my question, with this setup, do i still need a canonical tag and if i do, would the canonical tag be the escaped fragment URL or the regular URL? Much Appreciated!
Technical SEO | | RevanaDigitalSEO0 -
PageSpeed Insights DNS Issue
Hi Anyone else having problems with Google's Pagespeed tool? I am trying to benchmark a couple of my sites but, according to Google, my sites are not loading. They will work when I run them through the test at one point but if I try again, say 15 mins later, they will present the following error message An error has occured DNS error while resolving DOMAIN. Check the spelling of the host, and ensure that the page is accessible from the public Internet. You may refresh to try again. If the problem persists, please visit the PageSpeed Insights mailing list for support. This isn't too much an issue for testing page speed but am concerned that if Google is getting this error on the speed test it will also get the error when trying to crawl and index the pages. I can confirm the sites are up and running. I the sites are pointed at the server via A-records and haven't been changed for many weeks so cannot be a dns updating issue. Am at a loss to explain. Any advice would be most welcome. Thanks.
Technical SEO | | daedriccarl0 -
Exclude status codes in Screaming Frog
I have a very large ecommerce site I'm trying to spider using screaming frog. Problem is I keep hanging even though I have turned off the high memory safeguard under configuration. The site has approximately 190,000 pages according to the results of a Google site: command. The site architecture is almost completely flat. Limiting the search by depth is a possiblity, but it will take quite a bit of manual labor as there are literally hundreds of directories one level below the root. There are many, many duplicate pages. I've been able to exclude some of them from being crawled using the exclude configuration parameters. There are thousands of redirects. I haven't been able to exclude those from the spider b/c they don't have a distinguishing character string in their URLs. Does anyone know how to exclude files using status codes? I know that would help. If it helps, the site is kodylighting.com. Thanks in advance for any guidance you can provide.
Technical SEO | | DonnaDuncan0 -
Hreflang on non-canonical pages
Hi! I've been trying to figure out what is the best way to solve this dilemma with duplicate content and multiple languages across domains. 1 product info page 2 same product but GREEN
Technical SEO | | LarsEriksson
3 same product but RED
4 same product but YELLOW **Question: ** Since pages 2,3,4 just varies slightly I use the canonical tag to indicate they are duplicates of page 1. Now I also want to indicate there are other language versions with the_ rel="alternate" hreflang="x" _element. Should I place the _rel="alternate" hreflang="x" _on the canonical page only pointing to the canonical page with "x" language. Should I place the _rel="alternate" hreflang="x" _on all pages pointing to the canonical page with the "x" language? Should I place the _rel="alternate" hreflang="x" _on all pages and then point it to the translated page (even if it is not a canonical page) ? /Lars0 -
Use of + in url good or bad?
Hi, I am working on a SEO project for a client.
Technical SEO | | MaartenvandenBos
Some of the urls have a + between the keyword.
like www.example.com/make+me+happy/ Is this good or bad for seo?
Or is it maybe better to use - ? Thanks!0 -
Duplicate canonical URLs in WordPress
Hi everyone, I'm driving myself insane trying to figure this one out and am hoping someone has more technical chops than I do. Here's the situation... I'm getting duplicate canonical tags on my pages and posts, one is inside of the WordPress SEO (plugin) commented section, and the other is elsewhere in the header. I am running the latest version of WordPress 3.1.3 and the Genesis framework. After doing some testing and adding the following filters to my functions.php: <code>remove_action('wp_head', 'genesis_canonical'); remove_action('wp_head', 'rel_canonical');</code> ... what I get is this: With the plugin active + NO "remove action" - duplicate canonical tags
Technical SEO | | robertdempsey
With the plugin disabled + NO "remove action" - a single canonical tag
With the plugin disabled + A "remove action" - no canonical tag I have tried using only one of these remove_actions at a time, and then combining them both. Regardless, as long as I have the plugin active I get duplicate canonical tags. Is this a bug in the plugin, perhaps somehow enabling the canonical functionality of WordPress? Thanks for your help everyone. Robert Dempsey0
