How to re-follow using the WPSEO plugin
-
Hello,
I unindexed numerous blog low quality blog posts and nofollowed them at the same time using the Advanced meta tab for the Yoast WPSEO plugin. I am trying to reindex them, which I figured out and can successfully do,
What I cannot figure out is these posts will not return to follow status and remain nofollow. I have been recreating the blog posts, but this is very time consuming.
Is there some way to do this without have to reduplicate a new blog post?
I Googled this and searched MOZ with no luck.
thank you
Mike
-
Hi Mike
That is odd for sure. I could see this being tricky to diagnose over a Q&A so I'll suggest some more things and ultimately you might want to try to see if someone can help.
These are just guesses / possibilities;
- Do you have any caching plugins etc? Try disabling those
- Try disabling / enabling Yoast. Your settings should remain.
- Try one by one disabling other plugins and seeing if it changes.
- Are you using a theme that could conflicting? Check your theme settings.
- You may want to try Yoast support directly - he typically will claim it's not his plugin causing an issue (and 99% of the time it isn't) - so might be tough to get help, but that would be the ultimate source I think of a solution.
Beyond getting hands on with it, that's what I could offer as some other guesses. It does sound like something possibly simple. I would keep exploring all options! If you do find the cause feel free to write back and let us know.
-
Dan,
Yes, I had low quality content and as I fix it up I am trying to add it back. I unfortunately noindexed, nofollowed about 100 posts. After I changed to noindex/follow, which is what I wish I had done with all of them.
To set the posts to get re-indexed I have to select - "index" "always include" and when it comes to the Meta Robots Advanced I select "None" and change nofollow to follow and the post changes to allow it to be indexed turning the little color ball from blue to green, but the nofollow does not change and it remains noarchive as well. I have tried this over and over and still will not let me follow with the post again. I did check the source code as well and verified that is shows nofollow,noarchive.
I am using the latest version of WP and the WPSEO plugin as well.
I have attached a screenshot of what my settings are after trying to save a noindex,nofollow blog post.
thank you
Mike
-
Hi Mike
Yep it's clearer, thanks You had noindexed/nofollowed a lot of low quality pages, since improved them and want to return them to index/follow.
Just to check, do you have this option when editing each individual post in the Yoast box?
--> http://screencast.com/t/epjFCpGl8hT
Or do you mean you are selecting nofollow and it keeps switching back? Is Yoast and WordPress updated to the latest version?
Also, you are seeing "nofollow" in the HTML source? I know this is probably what you mean, just confirming to not miss a detail.
-Dan
-
Dan,
No this issue is still not resolved and I am hoping at this point I am not missing a small detail.
I noindexed and nofollowed numerous low quality pages. I have been fixing them up and when I go back to change the settings in the WPSEO tab I can successfully select the index portion of meta robots. But, I cannot get the nofollow to return to follow.
I realize Google has to crawl the site to reindex and the Google Link submission tool is faster, but that isn't the problem. It is getting those pages to show as wanting to be "followed."
I have no robots.txt file or am using the default WP file and my WP reading settings is allowing search engines to index the site.
I also have default WPSEO blog post settings as index/follow
I hope this makes my issue clearer?
thank you for your response.
Mike
-
thank you.
But the issue is I have used the Yoast meta advanced to noindex/nofollow numerous blog posts. Now that I have corrected them, I can reindex them with the same SEO tab in each blog post. But, the nofollow will not go back to follow or default.
I was trying to figure this out and the only solution was to copy the post to a new blog using the original url and delete the old post once I am done.
Not a great work around, but not sure how to get the advanced tab to show that I want to follow a post again.
Yes, bought the yearly subscription to ScreamingFrog and using it to fix issues on your site.
thank you again
Mike
-
Hey There
Just seeing if you still need help with this? Just to clarify, having a "nofollow" meta tag on the post does not prevent it from being indexed, that would be a "nopindex" tag - perhaps we're using the two terms interchangeably here?
To get the posts indexed again, you want three things to be true;
- There is no "noindex" present in the html meta tags
- There is nothing blocking the content in robots.txt
- You are linking to the posts from the block so they are crawled.
If those three things are all true, Google does need to crawl the page again to then reindex it. Thomas is correct in that you can "fetch as Googlebot" in webmaster tools to speed up this process and you can then submit that page, or even the whole site to the index.
Let us know if you still need help!
-Dan
-
Mike
try this as well.
http://www.feedthebot.com/tools/linkcount/
http://www.feedthebot.com/tools/spider/
http://www.feedthebot.com/tools/
read this
http://www.zemanta.com/blog/technical-seo-audit-for-publishers/
All the best,
Thomas
-
Hi Mike,
if the source code still shows no follow & no index then unfortunately Google bot will not change that.
the easiest way to tell is to use the Moz bar if you use Google Chrome or Firefox you can download it for free here
http://moz.com/tools/seo-toolbar
whenever you're on the page you think is blocked simply click the tool and it will tell you.
However if you have the no follow and no index removed then you have to wait for Google bot to index your site prior to any changes in Google.
Try running your site through one of the 3 tools here.
The Moz crawl test is pretty awesome it sometimes can take a while for the results come in. If your site is very large I would use it because the other free tools below will not go over a set amount of pages for instance Internet marketing ninjas 1000 pages is the max in the case of screaming frog 500 pages is the max.
https://moz.com/researchtools/crawl-test
One thing I would do is download this tool it is free to crawl your site up to 500 pages and works on Mac, PC and Linux
http://www.screamingfrog.co.uk/seo-spider/
It will show you very clearly if you have any pages that are no follow , no index
if you run that tool then export all the no follow no index pages or export the crawl report I can use the Pro version and I will change your tags to no longer say no follow no index
I'd also be interested in seeing what your robots.txt file says by putting a URL of mine into this tool below I was able to get this information
http://www.internetmarketingninjas.com/seo-tools/robots-txt-generator/
User-agent: *
Disallow: /wp-content/plugins/
Disallow: /wp-admin/
Disallow: /wp-includes/Sitemap: http://app.wistia.com/sitemaps/23283.xml
I can now see that as long as anything that says Disallow with the / is going to be blocked
its a very simple way to check for things that could be causing problems that would replicate identical symptoms.
The same company that makes that robots.txt tool makes another tool that could help you quite a bit. Similar to screaming frog however this one will crawl your site up to 1000 pages at no cost.
http://www.internetmarketingninjas.com/seo-tools/google-sitemap-generator/
I know it says site map generator however in addition to doing that it will show you every single blocked page and for what reason it's blocked. In addition you don't have to download software it's right on the web. After which it will e-mail you the results or you can watch them come in.
Here's some more information that might be of help to you
Kristina Kledzik works for distilled however she wrote this great quick audit guide right here.
http://www.zemanta.com/blog/technical-seo-audit-for-publishers/
https://www.distilled.net/blog/seo/7-technical-seo-wins-for-web-developers/
If you don't feel comfortable sharing your URL for more than welcome to private message me here.
Sincerely,
Thomas
-
Thomas,
I have the meta setup correctly in the plugin. I guess I was confused that the follow would automatically apply once I reversed the meta robots to index, always, but it still shows as nofollow. I have all blog posts as default index, follow.
I think you are saying Google Bot actually has to crawl to change the nofollow to follow?
thank you
Mike
-
in order to see what I was referencing before you can simply no index no follow from this part of the admin panel as well
https://yoast.com/wordpress-seo-1-2/
I think your problem is going to be in here
-
have you reversed everything that you've done inside the Yoast plug-in?
You say that you keep creating new blog posts, and they are all no follow, no index. is this correct?
have you looked at the main rules in
Robots Meta configuration
https://yoast.com/wordpress/plugins/seo/
you could also have no index selected for categories, tags, etc. whatever you could've easily just click the button, and no indexed your entire blog if it is a category.
How familiar are you with this plug-in?
I should Have started with this 1st however have you pulled your robots.txt file?
in this tool it will tell you to put "Existing robots.txt URL (optional)" _______________________
put your URL in their and then hit upload it will show you everything in your robots.txt file rather you have one or 4. It's possible because of plug-ins I'm not saying that's the issue but check it.
http://www.internetmarketingninjas.com/seo-tools/robots-txt-generator/
If you need more help with it sending your URL I will figured out.
Sincerely,
Thomas
-
You must wait for Google Bot
you can ask Google to crawl it.
Useing
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Can we use "top 10" in title?
Hi All, This is a query regarding title tag.I have a listing page with list of hotels in each city. To improve CTR, I used "Top 10 hotels in Boston" as title even though I am showing 25 hotels per page. The page takes about "hotels" but I didn't use "top 10" term anywhere in the page. Is this called keyword stuffing? Should I use "top 10" somewhere in the page as my title says so? Thanks for your help!
On-Page Optimization | | Avinash_12340 -
Can i use hard innerlinks on my blog to my landingspages ?
Hello, Ihave a website and also on the same domain a blog with a lot of posts. Is it possible in each blogpost put 2 innerlinks 1. innerlink to other blogpost with keyword or combination 2. hard link like "Design Sauna" and link to the landingspage of the webshop ? Is this the right way ? thanks 🙂 Regards, Marcel
On-Page Optimization | | Bossie720 -
Product Landing page- Key Words used too often.
Hi There to everyone. I'm very new at SEO so I appreciate all the help I can get! Question: on my e-commerce website, one heading is "USB KEYS", then when you click on that, you get a page full of products with the word "USB KEYS" on the title, such as "4gig black USB KEY".. So then I do the MOZ Page grader and get a low score because on the product landing page it thinks I've used the word "USB KEYS" too much, like 72 times,.. But I have to use it- Cause it has to be in the product title! Is this ok!? thanks
On-Page Optimization | | cowhidesdirect0 -
How to view all 'followed internal links' on a page
I am trying to view all the followed internal links on a few pages of my website. The MOZ toolbar just gives me the total number of internal followed links. What is the best way to actually see all the internal links that are followed by the google bot from any particular page? Thanks in advance.
On-Page Optimization | | rjchugh0 -
Should links on a family bar be no follows?
I have a network of sites that we use a family bar for to get the user to where they want to go but as I am looking at my link profile, i keep on seeing these links everywhere. (DUH, of course) Question is, should these links be no follow? Could these links hurt me?
On-Page Optimization | | SBRMarketing0 -
Best Way to Use Date in Title
Hi, I do most of the current copy for our blog which you can find here http://appointedd.com/blog/ I believe having a regular blog structure with a mix of irregular ad hoc posts to go in around these. So, for this blog, I write an article on "Beauty Industry News" every week. Now, I don't want to use the same title for each post, so I've peen butting in the date after each one i.e. "Beauty Industry News - 24/04/13". Is this best practice or is there a better way of naming regular posts? Thanks in advance!
On-Page Optimization | | LeahHutcheon0 -
Using Transcription Service For Videos - Have Question Around Search and Spiders
Hi All, So I have put together a weekly video series on security topics. I have read an SEOmoz post around how you can boost SEO by adding the transcription to the page, which makes perfectly good sense. My question is, can I include the first couple of paragraphs and then have a "read the full transcription" so when the user clicks, the rest of the content appears? Do the search engine spiders only crawl the first two paragraphs in this instance or do they crawl the whole thing even though the entire content is not on the page? I dont mind making the page longer and including the entire transcription if it is easier for SEO but if there is no difference, than I think the first option would be the best user experience. Thanks for the help Pat
On-Page Optimization | | PatBausemer0 -
Why isn't SEOMoz using File Extensions (*.html etc) on any of their web page URLs?
...and what is the SEO benefit of this? This video from Matt Cutts suggests using file extentions, except for a directory.
On-Page Optimization | | magicrob0