Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Targeting both Dutch countries .NL & .BE --> 2 ccTLD's using rel-alternate or just one TLD?
-
We want to target both Dutch countries .NL & .BE (Belgium & Netherlands).
Should we go for the 2 ccTLD's using rel-alternate, or go for one TLD, .EU or similar?We currently have an SEO project going on where DNS.be & DNS.nl are equally important. Currently we are using the rel-alternate meta data. The .be website is doing fantastic, the .nl one seems stagnant and not really getting to target.
For a similar project, we are now wondering whether we should go for the same approach, or just pick one TLD (.EU or similar).
Note: we cannot create content that is regionally specific, since the content is just what it is and cannot be altered.
-
I would not use a .eu domain if I were you (or probably anyone else). It's too big and generic of a target when Europe is full of so many countries and languages. I'd recommend it only for a site such as Eurovision. Now, there are three ways to do it.
**1. Separate root domains.**This would be creating and using example.be and example.nl.
2. Separate subdirectories/subfolders. Take your main website at example.com and configure its targeting (in the meta data and Google Webmaster Tools) to either Belgium or the Netherlands. Then, create a subdirectory/subfolder for the other country (example.com/nl/ or example.com/be/) and configure its targeting as well.
3. Separate subdomains. This would be creating nl.example.com and be.example.com
SEOs and digital marketers will argue forever over which one is best. I'll point out some general differences and points since I don't know your specific situation.
- Separate root domains and subdomains are essentially entirely-separate sites in Google's eyes. This is good to use when you have a lot of specialized content for each domain's target audience/country/topic. It's also usually easier to use different design templates on different domains and subdomains. The bad side is that links pointing to one domain or subdomain will probably not "benefit" the other one.
- Keeping everything on one domain in a second subdirectory/subfolder can be a lot more simple to manage. Plus, all links to everywhere on the domain generally "help" everything on the domain. However, you will often be limited to using the same overall design template.
Since you cannot create country-specific content, I'd create one website and use a secondary subdirector/subfolder (number two in the main list at the top). Google says the duplicate content is not a problem as long as it is clear that the two versions are each targeting a different location.
As to why your current .nl website is not performing, it's impossible to say without taking a look at it. First, review this page of introductory guidelines and the related links. Some more detail from Google. A Webmaster Support question.
For more information on international strategy, I'd suggest this post by Moz Associate Aleyda Solís. Good luck!
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Adding Multiple Country Locations for Google Business Listings
Hi Moz community, I hope everyone is well. I would like to ask for your advice on how to show a Google Business listing in both the UK and US for our brand. I understand that you can add multiple locations to your Google listing under the 'Manage Locations' tab but I wasn't quite sure how it worked in practice. I have a couple of questions below: If we have 2 registered locations/offices (one in the UK and one in the US) are we able to create 2 separate locations that will show our business listing correctly in the right-hand margin when people search for our brand in the US and UK respectively? If so, when a user finds our business listing in the US, are we able to serve them our US website version when they click the 'Website' button, as opposed to showing them our UK website? Our US website has been created as a sub-directory from our main UK site and can be seen as: www.example.com/us/ I hope someone is able to help, and thank you in advance.
Local Listings | | Katarina-Borovska
Katarina0 -
Is it more beneficial to use Yext rather than doing the citations manually?
Our company wanted to experiment on whether it truly is more beneficial to use Yext for citations rather than to do them ourselves. The thought process here, is that when we manually do the citations, some of our listings would increase in quality. The problem we have been running into, is that Yext has exclusive deals with nearly half of the sources we were previously listed under. Is there a way around this, or is Yext truly worth the cost?
Local Listings | | rburnett1 -
How do you fix a Google My Business Location Issue if the road doesn't yet exist on Google Maps?
My core question is just: How do you fix a Google My Business Location Issue if the road doesn't yet exist on Google Maps? Do I have any other options other than to just wait on Google to catch up with reality? Here's the background: I work for a hospital. We just opened a clinic on a street that is real and has a U.S. Postal Address, but Google Maps doesn't recognize it, and redirects people to a house . This is our postal address: 8343 S 168th Ave Omaha NE 68136-1677 If a patient enters the following into google maps, 8343 S 168th Ave, the location the map autofills the wrong zip code, and sends them to a home that is on S 168th Ave. (where in theory a home would exist if it had that home number). The road does exist in that portion of town. If a patient enters 8343 S 168th Ave, Omaha NE 68136, google maps takes you to the correct location, but it automatically changes Ave to St. The verified Google My Business listing also lists it as Street, even though on the back end I've put in the word Avenue, and it shows up in the right place. If however someone just searches by name "Chalco Clinic" the right Google My Business comes up. This is the Google My Business page I'm referring to: https://www.google.com/maps/place/Nebraska+Medicine+-+Chalco/@41.1754796,-96.1787153,15z/data=!4m5!3m4!1s0x0:0xf77aefb4e27f865!8m2!3d41.1754796!4d-96.1787153 And even though it says it's on a Street, on the back end of the claimed listing I've used "Avenue". In case it matters, this is the landing page for the location: https://www.nebraskamed.com/chalco
Local Listings | | Patrick_at_Nebraska_Medicine0 -
Geo targeting option in GWT
eCommerce site rendering their services globally but primary market is India. Below approximate traffic coming for countries India - 50% USA & Canda -20% Europe -20% Rest of the world - 10% We are not in a position to go for country specific TLD. What would be the appropriate option to be selected in Google Webmaster tools from the following? Enable Geo-targetting and select "India" Enable Geo targeting and select "Unlisted" Disable Geo targeting (uncheck checkbox) Please note that the site runs on Shopify hence server located in Canada and there are no plans to shift the server or platform.
Local Listings | | riyaaaz0 -
For Google's Structured Data, should I change my listings from Product schema to Local Business schema?
I was reading Google's Structured Data spec, and I'm considering changing the schema of our listing pages from the Product schema to the Local Business schema. Is this a good idea? To give you a little more info, the pages that I'm classifying are listings for physical spaces that our website rents out for activities, such as meetings. Here's an example of a listing: https://www.peerspace.com/pages/listings/550ddcde2f352d0800fc186b Our goal is to add the proper schema.org tags to the page so that our spaces show up in local searches, such as "meeting space in San Francisco." The problem is that when we add location microdata (addressLocality, addressRegion, etc.) to our current "Product" schema, Google tells us that "Products" can't have a location. However, we aren't quite a "Local Business" either, since we don't publicly share our space's street addresses—only the space's neighborhood/city/state for privacy reasons. As a result, we get an error from Google's Structured Data Tool as a "Local Business" page because "streetAddress" is required for Local Businesses. Should we switch to the Local Business schema anyway, even though we get structured data errors for streetAddress? Or is it better not to include the location information in the microdata so that we don't have errors? Does Google penalize you for incomplete tags? Any input is appreciated!
Local Listings | | stuartstein0 -
Geo-targeting Schema Codes
Hello Moz, I have a couple of questions about the wonderful world of schema.org. I understand basically how everything works, but I have a client that has multiple locations and operates as a bowling alley/restaurant/entertainment venue. My questions are as follows: 1. What is the difference between the Place, LocalBusiness, and Restaurant Schema Codes? Can I geo-target these codes to come up in the areas of the different locations? 2. With the Restaurant Schema Code, will the menu populate in google the way other restaurants do? Do I just need this code on pages that relate to their menu/restaurant? 3. Is there some sort of cheat sheet somewhere where I can see examples of codes and how to use them? Thanks!
Local Listings | | ColeBField0 -
Yext Listings: Why don't I see new inbound links?
The company I work for recently switched over to Yext to manage the local listings for our 275+ locations. Our listings have now been live with Yext for over 3 weeks and I'm wondering A. when should I expect to see new inbound links from these yext listings? and B. In what ways can I expedite the process? I've already re-crawled our site, but is there anything else I can do? This is my first experience with Yext so any thoughts or suggests about how to get the most out of the product would also be appreciated. Thanks,
Local Listings | | AaronPC0 -
Google Maps redirect notice on track-able URL's (how do I track maps visits in analytics?)
We've been using trackable URL's to track Google My Business visits in analytics for years.
Local Listings | | RedNovaLabs91
Example: ?utm_source=GoogleLocal&utm_medium=example&utm_campaign=example In the past month I've noticed Google showing a redirect notice on any listing with a trackable URL. It happened for a day or so a few weeks ago - and then it's been a more permanent situation since this past week. Redirect Notice
The previous page is sending you to: www.example.com
If you do not want to visit that page, you can return to the previous page. I'm fine with removing the trackable URL's - however - I'm not sure how to track maps visits via analytics without using them. I can't find any updated information on options. The last post on moz was in 2011 (http://moz.com/blog/tracking-traffic-from-google-places-in-google-analytics). The alternate tactics in that post no longer work. So my question is:
- How do I track Google Maps (My Business) visits through analytics without using tracking URLs?1