Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Using logical operators (AND / OR) in Google Analytics Goal Funnels
-
When setting up a Funnel within Google Analytics, is it possible to use logical operators (e.g. OR, AND) in the first (required) step of the funnel? For example, suppose I want to track users who visit page1.html AND page2.html before proceeding to the destination goal.
I've entered two pages separated by the OR operator, and neither the "Verify this Goal" nor "Save" produces an error message - is it safe to assume that this is working as I intend?
Thanks in advance!
-
Thanks, Peter. That's useful to know.
I ultimately found an easier solution. My situation is that I'm changing some URLs and I want to keep consistent tracking of my funnels/goals.
So if I changed a URL from say page1.htm to page2.htm, I was thinking I needed to define the associated funnel to be page1.htm OR page2.htm. However, I discovered that if I simply changed the funnel from the former to the latter, all of the historical data for page1.htm would be combined with new data collected for page2.htm. Thus, the logical operator wasn't necessary.
-
Yes - but there is one thing that you should know. Once you enable RegEx ALL your parameters in funnel should be regexed.
https://support.google.com/analytics/answer/1116091?hl=en#matchTypes
"Match Types: Begins with, Equals to, & Regular Expression
There are three diferent match types that define how Analytics identifies a URL for either a goal or a funnel. The match type that you select for your goal URL also applies to the URLs in the funnel, if you create one." -
Trenton,
Thanks for the suggestion. I'm trying it your way and will test shortly!
Best,
Akira
-
Hey Akira,
In the interest of a fast response, I have to admit I'm not 100% positive on this, that said I believe and my research (1, 2, 3) has supported the below response:
I do not believe that you can use logical operators to setup a step of the goal funnel, but you CAN use RegEx.
A simple RegEx to help here would be: (page1.html|page2.html). The () are just a grouping & the | is the OR operator.Hope that helps! Let me know if you have any issues on this. I would recommend testing your solution (make sure you haven't excluded the IP you're on) to ensure it's working properly. You should be able to see it ~2 hours after you complete the test.
Regards,
Trenton
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Whatstuffwherebot user agent messing up Google Analytics
Starting yesterday, Aug 26, 2020, I noticed a new bot crawling our site with user agent whatstuffwherebot. Google Analytics is counting these hits as human traffic, completely throwing off my numbers - yesterday, Analytics reported nearly triple my typical number of visitors. As of now, Search Console only shows data through Aug 25 so I don't know if Search Console is also affected. Is anybody else seeing something similar? Does anybody know what the whatstuffwherebot bot is? I don't get any results when I search on Google or Bing. For what it's worth, the traffic is coming from Columbus, OH, running over Amazon AWS via 278 different IP addresses so far. Also, WordFence (my WordPress security plugin) correctly identifies these hits as bot traffic.
Reporting & Analytics | | ahirai0 -
Attribution of conversions to payment gateway in Google Analytics
Hi all, We have been having a problem for a while now where most transactions are attributed to referrals from our payment gateway Sagepay. The issue started a couple of months ago, when we finally upgraded our website to https:// for logged in users and transactions. Before, when we were using http://, transactions were attributed to the correct channel. Even weirder, we upgraded 4 websites and only 2 of them have the issue now, the other two continue to attribute transactions correctly. I added Sagepay to the referral exclusion list which made no difference. Over the weekend, we upgraded to the global site tag and it seems to have improved somewhat, but yesterday 50% of transactions were still attributed to referral/sagepay. I am also seeing an odd issue, where for half of the transactions, the revenue and transaction are attributed to one channel, but the products (quantity) are attributed to another. One of the channels is always referral/sagepay and the other is the channel that the transaction should be attributed to. Has anyone seen this issue before? I'd appreciate any tips that might help us fix this issue. Thanks in advance!
Reporting & Analytics | | ViviCa10 -
Can you track two Google Analytics Accounts on one site?
If you have a site that had an old analytics account and then implemented a new one is it possible to run tracking code that records to both accounts without causing your site or data issues? We are doing this so we don't loose data at any point - ideally it wouldn't have been split between the two but making one redundant isn't an option. Ideally we would have merged the data from both accounts and had one - however the research we have done points to this not being a possibility - unless one of you guys knows different? It would be great if anyone has experience on any this.. Thanks
Reporting & Analytics | | ChrisAllbones0 -
Is there a way to find out who the admin of a Google Analytics account is?
We have a client who has been searching high and low to gain access to the GA account that is tied to their website, but previous agencies keep stating they don't have access. Is there a way to find out who the admins are on a GA account with the tracking number so we can reach out to that person and ask them to admin the client?
Reporting & Analytics | | marketingmediamanagement0 -
Tracking time spent on a section of a website in Google Analytics
Hi, I've been asked by a client to track time spent or number of pages visited on a specific section of their website using Google Analytics but can't see how to do this. For example, they have a "golf" section within their site and want to measure how many people either visit 5 page or more within the golf section or spend at least 6 minutes browsing the various golf section pages. Can anyone advise how if this can be done, and if so, how I go about it. Thanks
Reporting & Analytics | | geckonm0 -
Referral Traffic vs. Campaign Traffic in Google Analytics
I have two sites: a blog and an ecommerce site. The blog funnels people to the ecommerce site. In Analytics I'm seeing declines in referral traffic from the blog to the ecommerce site. During the same time I'm seeing an increase in campaign traffic to the ecommerce site, with most campaign traffic coming from the blog. I believe the increase in campaign traffic is largely a result of simply having installed more tracking links. This leads me to believe that the declines I'm seeing in referral traffic is simply a result of the increase in campaign traffic. In other words, what was once counted and reported as being referral traffic is now being counted and reported as campaign traffic. So my question is this: In Google Analytics is campaign traffic ALSO reported as referral traffic, or is campaign traffic reported separately and not duplicated in referral traffic reports? I'll provide a concrete example to make this more clear in case it isn't: Say site X sends 1000 visits each month to site Y. Say 50 of those visits come from a single link on X. If that link is changed so that campaign Z data info added (via the Google URL Builder), would you expect to then see 950 referral visits each month from site X to site Y plus 50 campaign visits to site Y via new campaign Z, or would you continue to see 1000 referral visits plus the new 50 campaign visits? Many thanks in advance to anyone that can shed some light on this.
Reporting & Analytics | | aaronprimal0 -
How to remove unwanted dynamic parameters from a URL in Google Analytics
Hi, Would really appreciate some help with this. I have been experimenting with RegEx to achieve this but as I’ve never used it before am currently failing miserably. We have conversion pages i need to set goals for that are formatted as below: https://www.domain.co.uk//Application_Form/(S(ewhbqp5cki0mppuzukunkqno))/enterCardDetails.aspx I need to remove the (s(xxx)) section from the URL as rather than one pages i currently have thousands of unique URL's. What’s catching me out is that as it’s not a URL parameter I can’t discount and as half way through can’t just do head matches etc to /entercarddetails Help would be much appreciated. Thanks.
Reporting & Analytics | | Sarbs0 -
Comparing % Change, Google Analytics
Hey Mozzers, Is there a simple way to compare the "% Change" in traffic when comparing two separate time periods in a single Google Analytics report? When comparing data from two separate time periods, an exported CSV doesn't include the % Change (booo!), and there's no option to sort by % Change within the GA report, essentially forcing you to scroll through all the results to pinpoint the major movers and shakers. I'm not averse to using spreadsheets to sort this data, but I'm thinking that I'd likely need a macro to make this work, something like this. However, none of the macros on that page are working (possibly because they were designed for a previous version of Analytics). All suggestions are appreciated. Thanks!
Reporting & Analytics | | dangaul0