How Can a Page Have More Unique Pageviews than Total Pageviews?
-
The question and the attached image say it all... how is this possible?
-
tool: the asynchronous tracking code from Google Analytics
-
It seems very improbable, but it's possible (not sure how I'd check for incognito visitors... I'll try to figure this out sometime in the next few weeks).
I tell you what - this specific issue itself is confounding, but the bigger problem is the small but evolving perception that all of the analytics data behind my advice is untrustworthy (a client's growing suspicion that "if this GA data is wrong, then all GA data must be wrong; and Glenn's advice, being based on this data, is invalid". I can just show all the new rankings we get for proof in the pudding, but I just personally want to figure this out theoretically to eliminate any remaining buried seeds of insecurity.... lol!
-
I've passed this one around internally for ideas too. Is this in a subject area where many people might be visiting in incognito mode? It is a bit of a head scratcher!
-
The client never noticed, but is about to on an update report (see attached).
Still happening, still baffling... really hoping someone can help me figure this out... several dozen people I've discussed this with don't believe me, see this, then are baffled too --
-
I haven't seen this before myself, and just now saw this question. What happens if you set the date period to less than a month? Do the numbers look better then? What about if you show things by day instead of week -- is there a day that is out of whack?
Did the client ever notice this and ask?
-
Thanks - that makes a lot of sense, holycap.
Yup - This report is not for a custom segment, and is beyond a month.
Right again, this image is for an infrequently visited page -- so that low volume could lead to bigger margins of error. I would expect those margins of error to match, though, for pageviews and unique pageviews - wouldn't you? Why would such similar metrics have such varying margins of error?
-
Mad props for replying --
This screenshot is from Google Analytics. My server logs, and other analytics software (clicky) don't report the same discrepancy. Since the owners of this website only check GA, I just wanted to figure this out so I can answer their question if they ever ask).
The code is installed correctly. It hurt a little to even consider that theory - though I did review the site firsthand and check....thanks for keeping me humble, tho! This site's bounce rate is about 12%, so I'm pretty sure it's not because of the visitor pressing the backbutton before the page loads (pageload lasts 2 seconds on average, and 95%+ of visitors spend over 10 seconds).
Still unresolved.... and this question is one of the few that seems to stick with me, since this one bizarre example makes all of GA seem less trustworthy. Lemme know if any other ideas spring up ---- Until then, I'll be like the attached images.
Thanks again --hands_twiddling_thumbs_lg_clr.gif image11.gif f923589989ee7d2c47f9106d3387db29b9b2278.gif
-
Another thing he could consider is the fact that this is an Analytic pull of a date range that looks to be beyond a month, so if this is a custom segment, it might be generating a fast access report that's known to be inaccurate in its ballpark estimate at times, especially when numbers are this low, the margin of error can be much bigger.
-
Magic. Obviously.
I can't give you a definite answer but I imagine what is happening is that the data points are being pulled two different ways. Perhaps unique pageviews are being pulled from requests for a URL but total pageviews are being pulled from tracking code and the code isn't loading because the code is put in wrong or the user hits the browser's back button before the page loads.
Which tool are you using?
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
How to filter blog pageviews using segments with regex
I must be overcomplicating this. I have a website with a blog structure that includes year subfolders, so: website.com/2019/blog-title, website.com/2018/blog-title, website.com/2017/blog-title, etc. I want to create a segment that I can apply in Site Content > All Pages to get quick stats for all blogs, regardless of year. (Pageviews, time on site, etc.) Unfortunately, Content Drilldown doesn't work well here as it is grouping by each year. I have tried setting up a segment using regex, but am getting a mixture of all pages, not just blog pages. I have set up the segment the following way: Advanced > Conditions > Page, Matches Regex, /2019/(.*?)/ Advanced > Conditions > Page, Matches Regex, /2018/(.*?)/ Advanced > Conditions > Page, Matches Regex, /2017/(.*?)/ Am I going about this all wrong? Is my regex wrong? Any advice is appreciated! Side note: glaringly obvious that now is the time to clean up my URLs. But I'd still love to see the data in its current URL state. Thank you!
Reporting & Analytics | | SoleGraphics0 -
Google Analytic - Avg load Time - Page Timing Sometimes Graph goes suddenly up why?
Hello All, I have attached the avg load time screenshot for my ecommerce site for 1 month. Screenshot is for Mobile site. If you check the graph then only one day graph gone very high. Now again I have attached that particular day graph too. My query is why graph gone high 1) Is it my site not performed well on particular one day on particular device for single visitor? because for desktop and tablet graph showing normal 2) so here if site restart or down then it can be a problem for desktop, tablet too right? Can anyone give me any clue? Z4hX1 IanuP
Reporting & Analytics | | pragnesh96390 -
I've seen 4webmasters.org/default.apsx as a referrer, but now it's showing as top page visited
I've seen 4webmasters.org/default.apsx as a referrer, but now it's showing as top page visited. How is this happening and how do I fix it?
Reporting & Analytics | | Stamats0 -
Thankyou page tag configuration while implementing enhance ecommmerce
Hello guys, Currently i am tracking conversion in google analytic via google tag manager by doing following configuration in tag manager :- "Page URL Contains thankyoupage.html" But now i am implementing Enhance Ecommerce with tag manager with following configuration : - Custom event - "Event equals Transaction" So i want to ask if i configure "Event equals Transaction" while implementing enhance ecommerce do i have to delete this configuration "Page URL Contains thankyoupage.html" which i am using currently? Thanks! Dev
Reporting & Analytics | | devdan0 -
Unique Users higher than Session on Google Analytics
How could us have a situation in Google Analytics where the unique users for given page is higher than the number of sessions?
Reporting & Analytics | | cbarron0 -
Duplicate Title Errors on Product Category Pages - The best practice?
I'm getting quite a few 'Duplicate Title Error' on category pages which span over 2 - 3 pages. E.g. http://www.partwell.com/cutting-punches http://www.partwell.com/cutting-punches?page=1 http://www.partwell.com/cutting-punches?page=2 http://www.partwell.com/cutting-punches?page=3 All 4 pages currently have the same title... <title>Steel Cutting Punches</title> I was thinking of adding Page Numbers to the title of each corresponding page, thus making them all unique and clearing the Duplicate Page Title errors. E.g. <title>Steel Cutting Punches</title> <title>Steel Cutting Punches | Page 1 of 3</title> <title>Steel Cutting Punches | Page 2 of 3</title> <title>Steel Cutting Punches | Page 3 of 3</title> Is this the best way to go around it? Or is there another way that I'm not thinking of? Would I need to use the rel=canonical tag to show that the original page is the one I want to be found? Thanks
Reporting & Analytics | | bricktech0 -
I have two campaigns that are only crawling one page, why is this?
I have a total of three campaigns running right now, and two of them are only crawling one page. I set the campaigns up the same, what is the problem?
Reporting & Analytics | | SiteVamp0 -
Why is the page title sometimes missing in the API results?
Why is the page title sometimes missing in the API results? It exists on the page and in the "keyword difficulty tool", but missing in the API. It is never returned when upa= 1For example:stdClass Object(
Reporting & Analytics | | kirza
[fmrp] => 7.05087881216
[fmrr] => 5.05983022077E-6
[pda] => 91.758307504
[ueid] => 0
[ufq] => www.yellowpages.com/
[uid] => 0
[umrp] => 0
[umrr] => 0
[upa] => 1
[upl] => yellowpages.com/
[us] => 0
[ut] =>
[uu] =>
) {"fmrp":5.679443875178763,"fmrr":2.052551993215746e-07,"pda":70.05750830306422,"ueid":0,"ufq":"education-portal.com/","uid":0,"umrp":0,"umrr":0,"upa":1,"upl":"education-portal.com/","us":0,"ut":"","uu":""}How to get the titles for these pages?0