Google Webmaster Tools not displaying all backlinks
-
I was asked to take a look at a site that a friend redesigned and immediately plummeted in rankings. It was a flash site where the domain redirected to a flash landing page. When the site was redesigned, they removed the flash page and put in the new site on the domain URL without changing the redirect or putting a 301 in place on the old flash landing page URL.
This site didn't have many backlinks to begin with, but it did ok for some important search phrases. Now when I look in Webmaster Tools, there are only 2 backlinks showing. Meanwhile I know there are more backlinks in existence, primarily from yellowpages and citysearch.
I've had them put a 301 on the old flash landing page pointing at the domain URL and they've added a canonical URL. What have I missed here?
-
Agreed, the point I was intending to make was that the WMT backlink info is not a definitive list, therefore it is not reliable resource of all backlinks.
I think it is a common mis-conception that because WMT is a Google product, the information in it must be 100% accurate, where as in reality that isn't the case.
Good point about the Majestic Fresh index, btw
-
A few thoughts - It can take a while for new links to be found by Google. They say it can take a couple of weeks but I've seen links that took months to be found.
Also, does the site have the proper www/non-www redirect in place? If Google thinks the www and non www are two different sites it's possible you're only getting the backlinks to one of those options.
-
Really? I often find that GWT reports a larger number of backlinks than the other tools. I agree that it takes time for the links to disappear once removed. this is where Majestic's fresh index can prove useful.
-
That sounds odd,
As William says, there isn't a tool out there that provides 100% of your backlinks. However, GWT is the most reliable source and usually provides more than any of the other tools (not surprising given Google's index).
I suspect there may be an issue with how it has been setup in GWT. I would go through this with a fine tooth comb to see if there are any issues there.
-
I've never found WMT's a reliable resource for backlink info, often it does not show all backlinks also when backlinks are removed it takes some time for them to disappear.
How recently were the yellow pages and city search links added?
Definitely run the site through OSE, majestic and AHrefs for a better picture as William suggested.
A couple of other things you could check
Go to WMT -> Health -> Crawl Errors to see if any other pages are not found
Check how many pages are being indexed to make sure there are no sitemap issues etc
Hope that helps
-
You may want to try other backlink checkers. I don't believe any tools get 100% backlinks. Use WMT, Open Site Explorer, Majestic SEO, and others to get a good number.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
404 Status Codes in Google Search Console
Hi all, I've noticed in Google Search Console under 'Crawl errors' - 1. Why does the status code '410' come up as an 'error' in the crawl report? 2. Why are some articles labelled as '404' error when they have been completely deleted and should be a '410' - there are roughly around 1000-2000 of these. Thanks!
Reporting & Analytics | | lucwiesman0 -
Google Analytics - Dashboard Question
I'm looking to set up a dashboard widget in Google Analytics that does the following but can't : Shows traffic sources in a table as the dimension, and wanting to show goal completions to a specific product page and then only show what the average time spent (by source) on just those product pages. It looks like it's showing the whole session duration for the entire source, but I want to create a secondary filter that is only showing the time spent on those specific pages. Can anyone help - or is this possible? Thanks all!
Reporting & Analytics | | ReunionMarketing0 -
Webmaster Tools and Geolocation
Our site gets a significant amount of traffic from Venezuela, about 9% based on our Google Analytics (the US being 63%). According to Webmaster Tools we get 48% of our clicks from Venezuela. That discrepancy is massive, considering we are an English site. My theory is that they are not allowed/capable of using secure search in Venezuela for some legal reason and therefore their searches are much more 'visible'. Does anyone have any insight?
Reporting & Analytics | | evansluke0 -
Google Analytics, new property or views?
Hi All We have an existing Google analytics account which was customised relatively heavily a few years back, with custom variables, e-commerce tracking and the a large number of filters. We have determined that the custom variables and e-commerce tracking, at least for now, are no longer required and actually complicating our lives. We want to simplify the account and add a fresh set of goals and events. Our initial train of thought was to create an entire new property with the usual views, raw, test, main etc. We are proposing to retain both properties (6 months) so we can still do some comparative stuff. We're now wondering if we should retain the existing property and just create new views, the downside being that whilst we can compare data with previous periods it's meaningless to some degree as the filters etc are different. The plus of more views is that we're not firing the tag twice retaining two properties. Views and opinions welcome. Thanks
Reporting & Analytics | | mde9110 -
Tracking Google places (7 pack listing) traffic in google analytics
Is there a way to see Google Places traffic (traffic from users clicking through the 7 pack listings) segmented in Google analytics ? Normally is it just lumped together with the organic traffic ? Can you see the search phrases used to find your site, or do they also show up under 'not provided' when from Google Places. Im aware i can see some limited data in the Google Places analytics, but these seem to be 2 days behind when ever i view them.
Reporting & Analytics | | Sam-P0 -
How to track in Google Analytics
Hello, I am helping a client track traffic using Google Analytics. We recently just signed an agreement with a publisher and they have given original credit using a canonical link. How can I track this? I believe it is showing up under direct/ none and I don't know to measure the success of our new partnership.
Reporting & Analytics | | rmazur0 -
How long does Google Analytics store data?
Hello All, How long analytics keep the data for one website? at least two years at least 25 months other I guess that they guarantee at least 25 months, but it might be more.
Reporting & Analytics | | CommercePundit
Anyone has any other suggestion? Thanks,0 -
Search within search? Weird google URLs
Good morning afternoon, how are you guys doing today? I'm experiencing a few Panda issues I'm trying to fix, and I was hoping I could get some help here about one of my problems. I used Google analytics to extract pages people land on after a Google search. I'm trying to identify thin pages that potentially harm my website as a whole. It turns out I have a bunch of pages in the likes of the following: /search?cd=15&hl=en&ct=clnk&gl=uk&source=www.google .co.uk, and so on for a bunch of countries (.fi, .com, .sg, .pk, and so on, maybe 50 of them) My question is: what are those pages? their stats are awful, usually 1 visitor, 100% bounce rate, and 0 links. Do you think they can explain my dramatic drop in traffic following Panda? If so, what should I do with them? NOINDEX? Deletion? What would you suggest? I also have a lot of links in the likes of the following: /google-search?cx=partner-pub-6553421918056260:armz8yts3ql&cof=FORID:10&ie=ISO-8859-1&sa=Search&siteurl=www.mysite.com/content/article They lead to custom search pages. What should I do with them? Almost two weeks ago, Dr. Pete posted an article untitled Fat Panda and Thin Content in which he deals with "search within search" and how they might be targeted by Panda. Do you think this is the issue I'm facing? Any suggestion/help would be much appreciated! Thanks a lot and have a great day 🙂
Reporting & Analytics | | Ericc220