Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Ending URLs in .html versus /
-
Hi there!
Currently all the URLs on my website, even the home page, end it .html, such as http://www,consumerbase.com/index.html
Is this bad?
Is there any benefit to this?Should I remove it and just have them end with a forward slash?
If I 301 redirect the old .html URLs to the forward slash URLs, will I lose PA?Thanks!
-
As everyone else has said, it doesn't really make a difference whether you have a file/extension as part of the URL. But if you do change your URLs and 301 redirect the old URLs to the new, you will lose some link equity (typically about 10%-15%); I'm not sure if this devaluation is reflected in OSE/Moz metrics.
That said, I would recommend showing the directory without a file extension (using consumerbase.com/ instead of consumerbase.com/index.html). If you change platforms in the future to something that runs off PHP or some other language, displaying .html file types might not be an option but you can always display the directory. If you set yourself up now to display without the doc type, you don't have to worry about these changes in the future as much.
-
In my experience you will generate more consistent inbound links to the root url - http://www.consumerbase.com/index.html - if you were to use that as the root (canonical) url and do the following
1. Ask anyone linking to /index.html to link to http://www.consumerbase.com/
2. Once completed, 301 redirect /index.html to http://www.consumerbase.com/Ask yourself this: how often do you see someone refer an audience to http://www.consumerbase.com/index.html?
There rarely, do - out of convenience and ease of use / standardization.
So, for sharing and for ensuring that all inbound link weight is organized at only one canonical url I would suggest you consider using http://www.consumerbase.com/ at the root.
All other pages can use use .html just fine.
Hope this helps,
Todd -
Hey there!
There's no benefit or negative effect of this either way - so there's really nothing to worry about here.
Furthermore, if you type in http://www.consumerbase.com/ you get redirected to the .html version and it's the same for internal pages. This means you've not got any problems with duplicate URLs or content.
In short, everything is in order and from an SEO point of view there's no reason to make the change - all is well! The only reason why you may want to make the change is from a user experience point of view - but I don't think visitors to your site will be concerned with .html extensions at all.
Hope this helps to put your mind at rest!
-
-
Not bad
-
Benefit only comes from a usability preference. Do you think your readers would rather see it without the html suffix? Some people think so.. I personally don't think it matters at all but a lot of people will say "shorter is better." It also maximizes your compatibility should you ever change your format from an html to an active server page or something of the sort. (i think that's pretty rare though.)
-
No you will not lose PA. 301s maintain link juice (for the most part.)
-
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Looking for opinions on structuring meta title tags/page title/menu title/H1
Hi everyone I am hoping a few of you can share your opinions. I have been having conversations (okay, healthy debates) about how to write/structure meta title tag and how to compliment them with the H1, page title, menu name. To help explain the thought processes I will use a pretend keyword. How about "screwdriver". Case: (I made this up) we are redesigning a website for a construction tools manufacturing company (pretend name: ABC Tools) targeting OEMs who are interested in purchasing large quantities of tools. The product categories (to become main menu items) are Screwdrivers, Nails, Drills, and Hammers. (bear with me .... this is just an example I am making up on the fly) K. Circling back to screwdrivers - let's say we have one landing page (a primary category page and in the main menu) listing products and great details about screwdrivers. Focus keywords are screwdriver manufacturer, screwdriver supplier, construction screwdrivers Below are questions being debated. If you are willing ... how would you address these questions? And, can you explain WHY? QUESTION ONE: How would you structure the meta title tag (feel free to write one of your own) Screwdriver Manufacturer - Construction Screwdriver | ABC Tools ABC Tools - US-based Screwdriver Manufacturer Supplier Near You High-Quality Screwdrivers for Construction with ABC Tools QUESTION TWO: how would you write the H1 on the page? Would it match the meta tag? OR, would you write something different using the primary keyword? QUESTION THREE Remembering this is not a blog post ... it is a primary landing page linked to the main navigation. What would the menu title be? (remember the product categories above are how the main menu items are bucketed) Screwdrivers Screwdriver Manufacturer Typically in WordPress, the H1 and the menu title is auto-populated using the page title (not the title tag)... So, if we use Screwdrivers as the page title but we want the H1 to match the meta title tag, would we manually change the H1? Or, have the page title and title tag match, but manually change the menu item?
Intermediate & Advanced SEO | | Brenda.Haines1 -
410 or 301 after URL update?
Hi there, A site i'm working on atm has a thousand "not found" errors on google console (of course, I'm sure there are thousands more it's not showing us!). The issue is a lot of them seem to come from a URL change. Damage has been done, the URLs have been changed and I can't stop that... but as you can imagine, i'm keen to fix as many as humanly possible. I don't want to go mad with 301s - but for external links in, this seems like the best solution? On the other hand, Google is reading internal links that simply aren't there anymore. Is it better to hunt down the new page and 301-it anyway? OR should I 410 and grit my teeth while google crawls and recrawls it, warning me that this page really doesn't exist? Essentially I guess I'm asking, how many 301s are too many and will affect our DA? And what's the best solution for dealing with mass 404 errors - many of which aren't attached or linked to from any other pages anymore? Thanks for any insights 🙂
Intermediate & Advanced SEO | | Fubra0 -
Inactive Products - Inactive URLs
Hi, In our website www.viatrading.com we have many products that might be in stock or not depending on availability. Until now, when a product was not available anymore, we took this page down (and redirected to its product category page). And, only if the product was available again, we re-activated the URL - this might be days, months or even years later. To make this more SEO-friendly, we decided now that while a product is not available, instead or deactivating/redirecting the page, we will leave it online and just add a message saying "This product is currently not available". If we do this, we will automatically re-activate about 500 products pages at once. 1. Just to make sure, is it harmful for SEO to keep activating/deactivating URLs this way? 2. Since most of these pages have been deindexed for a long time due to being redirected - have they lost all their SEO juice? 3. How can we better activate these old 500 pages - is it ok activating them all at once? Thank you,
Intermediate & Advanced SEO | | viatrading11 -
URL Rewriting Best Practices
Hey Moz! I’m getting ready to implement URL rewrites on my website to improve site structure/URL readability. More specifically I want to: Improve our website structure by removing redundant directories. Replace underscores with dashes and remove file extensions for our URLs. Please see my example below: Old structure: http://www.widgets.com/widgets/commercial-widgets/small_blue_widget.htm New structure: https://www.widgets.com/commercial-widgets/small-blue-widget I've read several URL rewriting guides online, all of which seem to provide similar but overall different methods to do this. I'm looking for what's considered best practices to implement these rewrites. From what I understand, the most common method is to implement rewrites in our .htaccess file using mod_rewrite (which will find the old URLs and rewrite them according to the rewrites I implement). One question I can't seem to find a definitive answer to is when I implement the rewrite to remove file extensions/replace underscores with dashes in our URLs, do the webpage file names need to be edited to the new format? From what I understand the webpage file names must remain the same for the rewrites in the .htaccess to work. However, our internal links (including canonical links) must be changed to the new URL format. Can anyone shed light on this? Also, I'm aware that implementing URL rewriting improperly could negatively affect our SERP rankings. If I redirect our old website directory structure to our new structure using this rewrite, are my bases covered in regards to having the proper 301 redirects in place to not affect our rankings negatively? Please offer any advice/reliable guides to handle this properly. Thanks in advance!
Intermediate & Advanced SEO | | TheDude0 -
Question about Indexing of /?limit=all
Hi, i've got your SEO Suite Ultimate installed on my site (www.customlogocases.com). I've got a relatively new magento site (around 1 year). We have recently been doing some pr/seo for the category pages, for example /custom-ipad-cases/ But when I search on google, it seems that google has indexed the /custom-ipad-cases/?limit=all This /?limit=all page is one without any links, and only has a PA of 1. Whereas the standard /custom-ipad-cases/ without the /? query has a much higher pa of 20, and a couple of links pointing towards it. So therefore I would want this particular page to be the one that google indexes. And along the same logic, this page really should be able to achieve higher rankings than the /?limit=all page. Is my thinking here correct? Should I disallow all the /? now, even though these are the ones that are indexed, and the others currently are not. I'd be happy to take the hit while it figures it out, because the higher PA pages are what I ultimately am getting links to... Thoughts?
Intermediate & Advanced SEO | | RobAus0 -
Image URLs - best practice
Hi - I'm assuming image URL best practice follows same principles as non image URLs (not too many files and so on) - I notice alot of web devs putting photos in subdomains, so wonder if I'm missing something (I usually avoid subdomains like the plague)!
Intermediate & Advanced SEO | | McTaggart1 -
Should I disallow all URL query strings/parameters in Robots.txt?
Webmaster Tools correctly identifies the query strings/parameters used in my URLs, but still reports duplicate title tags and meta descriptions for the original URL and the versions with parameters. For example, Webmaster Tools would report duplicates for the following URLs, despite it correctly identifying the "cat_id" and "kw" parameters: /Mulligan-Practitioner-CD-ROM
Intermediate & Advanced SEO | | jmorehouse
/Mulligan-Practitioner-CD-ROM?cat_id=87
/Mulligan-Practitioner-CD-ROM?kw=CROM Additionally, theses pages have self-referential canonical tags, so I would think I'd be covered, but I recently read that another Mozzer saw a great improvement after disallowing all query/parameter URLs, despite Webmaster Tools not reporting any errors. As I see it, I have two options: Manually tell Google that these parameters have no effect on page content via the URL Parameters section in Webmaster Tools (in case Google is unable to automatically detect this, and I am being penalized as a result). Add "Disallow: *?" to hide all query/parameter URLs from Google. My concern here is that most backlinks include the parameters, and in some cases these parameter URLs outrank the original. Any thoughts?0 -
Low text-HTML ratios
Are low text-HTML ratios still a negative SEO ranking factor? Today I ran SEMRUSH site audit that showed 344 out of 345 pages on our website (www.nyc-officespace-leader.com) show an text-HTML ratio that ranges from 8% to 22%. This is characterized as a warning on SEMRUSH. This error did not exist in April when the last SEMRUSH audit was conducted. Is it worthwhile to try to externalize code in order to improve this ratio? Or to add text (major project on a site of this size)? These pages generally have 200-400 words of text. Certain URLs, for example www.nyc-officespace-leader.com/blog/nycofficespaceforlease more text, yet it still shows an text-HTML ratio of only 16%. We recently upgraded to the WordPress 4.2.1. Could this have bloated the code (CSS etcetera) to the detriment of the text-HTML ratio? If Google has become accustomed to more complex code, is this a ratio that I can ignore. Thanks, Alan
Intermediate & Advanced SEO | | Kingalan10