Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Ending URLs in .html versus /
-
Hi there!
Currently all the URLs on my website, even the home page, end it .html, such as http://www,consumerbase.com/index.html
Is this bad?
Is there any benefit to this?Should I remove it and just have them end with a forward slash?
If I 301 redirect the old .html URLs to the forward slash URLs, will I lose PA?Thanks!
-
As everyone else has said, it doesn't really make a difference whether you have a file/extension as part of the URL. But if you do change your URLs and 301 redirect the old URLs to the new, you will lose some link equity (typically about 10%-15%); I'm not sure if this devaluation is reflected in OSE/Moz metrics.
That said, I would recommend showing the directory without a file extension (using consumerbase.com/ instead of consumerbase.com/index.html). If you change platforms in the future to something that runs off PHP or some other language, displaying .html file types might not be an option but you can always display the directory. If you set yourself up now to display without the doc type, you don't have to worry about these changes in the future as much.
-
In my experience you will generate more consistent inbound links to the root url - http://www.consumerbase.com/index.html - if you were to use that as the root (canonical) url and do the following
1. Ask anyone linking to /index.html to link to http://www.consumerbase.com/
2. Once completed, 301 redirect /index.html to http://www.consumerbase.com/Ask yourself this: how often do you see someone refer an audience to http://www.consumerbase.com/index.html?
There rarely, do - out of convenience and ease of use / standardization.
So, for sharing and for ensuring that all inbound link weight is organized at only one canonical url I would suggest you consider using http://www.consumerbase.com/ at the root.
All other pages can use use .html just fine.
Hope this helps,
Todd -
Hey there!
There's no benefit or negative effect of this either way - so there's really nothing to worry about here.
Furthermore, if you type in http://www.consumerbase.com/ you get redirected to the .html version and it's the same for internal pages. This means you've not got any problems with duplicate URLs or content.
In short, everything is in order and from an SEO point of view there's no reason to make the change - all is well! The only reason why you may want to make the change is from a user experience point of view - but I don't think visitors to your site will be concerned with .html extensions at all.
Hope this helps to put your mind at rest!
-
-
Not bad
-
Benefit only comes from a usability preference. Do you think your readers would rather see it without the html suffix? Some people think so.. I personally don't think it matters at all but a lot of people will say "shorter is better." It also maximizes your compatibility should you ever change your format from an html to an active server page or something of the sort. (i think that's pretty rare though.)
-
No you will not lose PA. 301s maintain link juice (for the most part.)
-
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Forwarded vanity domains, suddenly resolving to 404 with appended URL's ending in random 5 characters
We have several vanity domains that forward to various pages on our primary domain.
Intermediate & Advanced SEO | | SS.Digital
e.g. www.vanity.com (301)--> www.mydomain.com/sub-page (200) These forwards have been in place for months or even years and have worked fine. As of yesterday, we have seen the following problem. We have made no changes in the forwarding settings. Now, inconsistently, they sometimes resolve and sometimes they do not. When we load the vanity URL with Chrome Dev Tools (Network Pane) open, it shows the following redirect chains, where xxxxx represents a random 5 character string of lower and upper case letters. (e.g. VGuTD) EXAMPLE:
www.vanity.com (302, Found) -->
www.vanity.com/xxxxx (302, Found) -->
www.vanity.com/xxxxx (302, Found) -->
www.vanity.com/xxxxx/xxxxx (302, Found) -->
www.mydomain.com/sub-page/xxxxx (404, Not Found) This is just one example, the amount of redirects, vary wildly. Sometimes there is only 1 redirect, sometimes there are as many as 5. Sometimes the request will ultimately resolve on the correct mydomain.com/sub-page, but usually it does not (as in the example above). We have cross-checked across every browser, device, private/non-private, cookies cleared, on and off of our network etc... This leads us to believe that it is not at the device or host level. Our Registrar is Godaddy. They have not encountered this issue before, and have no idea what this 5 character string is from. I tend to believe them because per our analytics, we have determined that this problem only started yesterday. Our primary question is, has anybody else encountered this problem either in the last couple days, or at any time in the past? We have come up with a solution that works to alleviate the problem, but to implement it across hundreds of vanity domains will take us an inordinate amount of time. Really hoping to fix the cause of the problem instead of just treating the symptom.0 -
Breadcrumbs versus in context link
Hi, I remember reading that links within the text have more value than breadcrumbs links for example because in context links are surrounded by the right content (words) but google search engine optimisation starter guide says breadcrumbs are good, so which one is recommended ? Thank you,
Intermediate & Advanced SEO | | seoanalytics0 -
Inactive Products - Inactive URLs
Hi, In our website www.viatrading.com we have many products that might be in stock or not depending on availability. Until now, when a product was not available anymore, we took this page down (and redirected to its product category page). And, only if the product was available again, we re-activated the URL - this might be days, months or even years later. To make this more SEO-friendly, we decided now that while a product is not available, instead or deactivating/redirecting the page, we will leave it online and just add a message saying "This product is currently not available". If we do this, we will automatically re-activate about 500 products pages at once. 1. Just to make sure, is it harmful for SEO to keep activating/deactivating URLs this way? 2. Since most of these pages have been deindexed for a long time due to being redirected - have they lost all their SEO juice? 3. How can we better activate these old 500 pages - is it ok activating them all at once? Thank you,
Intermediate & Advanced SEO | | viatrading11 -
Should I disallow all URL query strings/parameters in Robots.txt?
Webmaster Tools correctly identifies the query strings/parameters used in my URLs, but still reports duplicate title tags and meta descriptions for the original URL and the versions with parameters. For example, Webmaster Tools would report duplicates for the following URLs, despite it correctly identifying the "cat_id" and "kw" parameters: /Mulligan-Practitioner-CD-ROM
Intermediate & Advanced SEO | | jmorehouse
/Mulligan-Practitioner-CD-ROM?cat_id=87
/Mulligan-Practitioner-CD-ROM?kw=CROM Additionally, theses pages have self-referential canonical tags, so I would think I'd be covered, but I recently read that another Mozzer saw a great improvement after disallowing all query/parameter URLs, despite Webmaster Tools not reporting any errors. As I see it, I have two options: Manually tell Google that these parameters have no effect on page content via the URL Parameters section in Webmaster Tools (in case Google is unable to automatically detect this, and I am being penalized as a result). Add "Disallow: *?" to hide all query/parameter URLs from Google. My concern here is that most backlinks include the parameters, and in some cases these parameter URLs outrank the original. Any thoughts?0 -
Low text-HTML ratios
Are low text-HTML ratios still a negative SEO ranking factor? Today I ran SEMRUSH site audit that showed 344 out of 345 pages on our website (www.nyc-officespace-leader.com) show an text-HTML ratio that ranges from 8% to 22%. This is characterized as a warning on SEMRUSH. This error did not exist in April when the last SEMRUSH audit was conducted. Is it worthwhile to try to externalize code in order to improve this ratio? Or to add text (major project on a site of this size)? These pages generally have 200-400 words of text. Certain URLs, for example www.nyc-officespace-leader.com/blog/nycofficespaceforlease more text, yet it still shows an text-HTML ratio of only 16%. We recently upgraded to the WordPress 4.2.1. Could this have bloated the code (CSS etcetera) to the detriment of the text-HTML ratio? If Google has become accustomed to more complex code, is this a ratio that I can ignore. Thanks, Alan
Intermediate & Advanced SEO | | Kingalan10 -
If I own a .com url and also have the same url with .net, .info, .org, will I want to point them to the .com IP address?
I have a domain, for example, mydomain.com and I purchased mydomain.net, mydomain.info, and mydomain.org. Should I point the host @ to the IP where the .com is hosted in wpengine? I am not doing anything with the .org, .info, .net domains. I simply purchased them to prevent competitors from buying the domains.
Intermediate & Advanced SEO | | djlittman0 -
Where to put a page ID in a URL?
Hello, My company is going to change URLs to example.com/category or example.com/product. When we will change the URLs to product or category pages somehow we have to check whether the requested page is from category table in DB or from products table (this gives much speed to page load time). So we have to choose how to make the different product and category pages.
Intermediate & Advanced SEO | | komeksimas
Programmers said that we need to insert id to URL. So the question is: Which is the better way to place an id to an URL? example.com/product-name?id=111 example.com/product-name/111 example.com/product_name-111 Or maybe we should use some other punctuation mark to separate id from product name? p.s. I have read Dynamic URLs vs. static URLs by Google and it still didn't answered which is the best for all of the pages. Somehow others solve this problem by typing only the names to the URL, but could anyone tell what that technology should be?0 -
How To 301 Redirect .html pages
I need to redirect a page/URL that is purely .html to a new location. I don't know how to do this. All the redirects I can find are for server side code pages .php/.aspx etc. From my understanding I can't put a server side redirect in a .html file. I am hosting on a microsoft server, however the new page I am redirecting to is .php. I am running some WordPress (.php) files on the server. I need to make it redirect before the old page loads so visitors don't start reading something that is about to get redirected Can someone please help me?
Intermediate & Advanced SEO | | MyNet0