Help with GA Filters - IP Addresses
-
I'm having a hard time filtering out both of the IP addresses at our office. One is easy with regular expressions, but the other one does not seem to be working.
Here are the two IP addresses:
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86
174.99.90.148I set up these two custom filters and neither worked for the longer IP address.
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148Would you please help steer me in the right direction? Thanks as always MOZ friends!
-
Figured it out fully! This is how I needed to write the filter to have both in a regular expression:
174.99.90.148|^2606:a000:4e2b:d500
Thanks again everyone for steering me in the right direction!
-
Not sure why, but it looks like we just have to have separate filters for ipv6 versus ipv4s... works that way, but not combined for whatever reason.
Thanks for the help everyone!
-
I would agree with Dmitrii again on this one. For ipv6 there shouldn't be a need for regex as there are no '.' characters and ':' does not cause a regex function. You might want to consider simply segmenting the ipv4 and ipv6 as two different filters? I know this defeats your purpose of using one filter to catch them all but the problem you are facing may be caused by trying to group ipv6 and ipv4 in the same filter.
Try doing them separately and let us know if that solves the issue of correctly filtering the ipv6 traffic while using the pipes to join multiple ipv6 in one filter.
-
If you are creating filter just for one IPv6, why to you use regular expression at all? Just input it as it is.
-
I'm no longer getting the error, but for whatever reason putting them together is not filtering them out. What it looks like I need to do is create a custom filter and determine how to put the ipv6 in as a regular expression, which I do not understand how to do. Do you know?
-
The solution Dmitrii proposed has also worked for me with no invalid IP address error.
Can you confirm that this is still not working for you and provide a screenshot if possible?
-
It worked for me. I just checked. Are you doing it in custom, rather than predefined?
-
When I put that in it tells me that it's an invalid IP address...
-
It should be
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148 -
It does work when I set up a predefined filter blocking IP, but only for that one ipv6 - when trying to add both it isn't working and I'm hoping to only have one filter that blocks multiple IPs... thoughts?
-
Again, is it working if you create a filter just for ipv6?
-
Basically, what I'm trying to do is build the functionality to have all of my IP addresses, both IPv4 and IPv6 in one GA filter. I selected a custom filter to exclude IP addresses that are equal to the below expression, but it's not working for the IPv6. Can someone tell me what's wrong with this setup?
174.99.90.148|2606:a000:4e2b:d500:8519:4fcb:8bf0:78d7
I'm pretty sure the regular expression is incorrect for the IPv6, but I don't know how to do it and cannot figure it out through research.
Thanks as always MOZ friends!
-
Well, try ipv6 by itself first. Make sure it's working, eliminate the variables, you know. If it works by itself, then you can start digging into regular expressions (even though it should be simple ipv6|ipv4 without escapes). Who knows - maybe fault is not in regular expressions, but address is wrong or something.
-
I'd like to put all of these IP addresses in one filter instead of several, which requires a regular expression. These IPs are ours, but I also want to add different partners' IP addresses on their sites. We work with about 50 different websites and I'm hoping to have this as just one of the filters. The regular expression works for the non-IPv6 (thanks!) IP, but the IPv6 one is not filtering.
Make sense? Thanks again for the help!
-
IPv6 is that long IP address.
Simply go to filters in GA, find predefined filter, choose exclude, choose "traffic from IP addresses" and paste your IP, which is 2606:a000:4e2b:d500:61d9:9d4e:c539:ea86.
-
Pardon the lack of knowing, but what is ipv6? How does that filter look in the GA filter? Thanks!
-
Hi there.
You should be able to exclude both IPs without any escaping. What I'd recommend is to create a filter just for ipv6 and see if exclusion works. Let me know if that works.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Help! Need to Get Traffic Back Up in Saturated Market
I was looking in one of my client's Google Analytics profiles, and noticed that they had two major drops in traffic before we started working with them—and they've never really recovered. The first, and most significant drop was around January 2015. And then the again, but not as drastic of a drop, was around September 2015. They are a heating and cooling company, but they are located out west so this shouldn't be a seasonality thing. Here is a link to what the BIG drop is traffic looks like in January 2015: http://imgur.com/a/Y1s8U To get a clearer picture, here are the numbers for the overall website traffic:
Reporting & Analytics | | BlueCorona
September 1, 2015 - September 30, 2015: 30,923 sessions
September 1, 2015 - September 30, 2016: 13,768 sessions Year over year traffic to the website dropped by 55%. Here is a link to what year over year looks like in Google Analytics: http://imgur.com/a/TPdJQ Like I said, we weren't working with them at the time so I don't know specifics about what might have caused this, but their numbers have never even come close to reaching what they used to be prior to the noticeable drop after September 2015. Does anyone have any insights into why this might be? Was there an algorithm change back then that could still be impacting them? Any ideas how to get them back to where they once were? Any input is greatly appreciated! Thanks.1 -
GA Landing Page Inaccuracies
I had seen a thread on this a while back but no solution posted. There was a link posted to someone else explaining the issue but I got a 404 when clicking. Have a client that does mostly PPC and they are getting their conversion page showing up as landing page from paid many times. This is definitely not a sitelink, etc. The only way you get to this page is if you filled out the form. There are a few other pages showing up as landing pages that don't make sense too. Can this be attributed to someone being "inactive" for 30 minutes and then coming back and performing an action on this page (leaving)? If so, does this double count the conversion if a page visit here is a conversion? Just trying to make sense of the landing page report showing so many instances of our conversion page. Thanks in advance!
Reporting & Analytics | | jeremyskillings0 -
Community Discussion - Do you think increasing word count helps content rank better?
In the online marketing community, there is a widespread belief that long-form content ranks better. In today's YouMoz post, Ryan Purthill shares how his research indicated 1,125 to be a magic number of sorts: The closer a post got to this word count, the better it ranked. Diminishing returns, however, were seen once a post exceeded 1,125 words. Does this jibe with your own data and experiences? Do you think increasing word count helps content rank better in general? What about for specific industries and types of content? Let's discuss!
Reporting & Analytics | | Christy-Correll6 -
URLS are top keywords in GA?
Hey Moz, For some reason on my father's website, michaelpadway.com, the top 2 keywords from organic are complete urls from his site. This doesn't makeugh sense to me. Any ideas?
Reporting & Analytics | | MarloSchneider1 -
Weird Math in GA Ecommerce Tracking
Hi everybody. I've recently discovered that I have a problem with the ecommerce tracking on a client's website. The client sells concert tickets at an average price of $10 per ticket. The custom ecommerce platform they use is kind of unusual; the same product often has different SKUs, but not always. This isn't associated with different seats, etc. In fact, I don't yet know why they've set it up that way. The problem that I'm facing is this: the data in Analytics is calculating the "average price" of a SKU item as the total price. If, for example, the actual average price for a SKU item is $10 and four of those SKU items were sold, Analytics will tell me the average price is $40. This means that the total revenue for that SKU shows up as $40 x 4 = $160. Needless to say, this is enormously skewing the data. Here's a screenshot. Note, it's the same product: http://screencast.com/t/JyLQkb3jzz6s The total revenue for ticket sales is way off because of this, and I'm not sure if it's a problem with the ecommerce tracking code in Analytics, or something that the ecomm platform is doing. Have any of you experienced anything like this, and if so is it a fix in Analytics? Thank you!
Reporting & Analytics | | newwhy0 -
GA Regex Help Needed!
Hi mozzers, I am just discovering the RegEx world so I need your help. I would like to create an advanced segment to track 40 specific pages that have very different URIs from each other. Can you tell me how using RegEx? The dimension would be "landing pages" then not sure... Thanks
Reporting & Analytics | | Ideas-Money-Art0 -
Tool to check GA code present on every page?
Is there a tool to check if the Google Analytics code is present on every page of a website? Thanks for your help!
Reporting & Analytics | | gerardoH0 -
Help with Analytics
Afternoon all - I hope someome might be able to help me getting some data out of Google Analytics. I want to try pull a report which will show me both what the last page before a goal completion was and the country that generated the click. Is that possible at all? When I go to look at goals, I can only pull data for the last page before the goal click ... and when I look at my goals in the Pages>Content menu, I can only view country. So is there any way of pulling the two set of data together at all? Any thoughts would be really appreciated. Thanks very much, Simon
Reporting & Analytics | | theshortstack0