Help with GA Filters - IP Addresses
-
I'm having a hard time filtering out both of the IP addresses at our office. One is easy with regular expressions, but the other one does not seem to be working.
Here are the two IP addresses:
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86
174.99.90.148I set up these two custom filters and neither worked for the longer IP address.
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148Would you please help steer me in the right direction? Thanks as always MOZ friends!
-
Figured it out fully! This is how I needed to write the filter to have both in a regular expression:
174.99.90.148|^2606:a000:4e2b:d500
Thanks again everyone for steering me in the right direction!
-
Not sure why, but it looks like we just have to have separate filters for ipv6 versus ipv4s... works that way, but not combined for whatever reason.
Thanks for the help everyone!
-
I would agree with Dmitrii again on this one. For ipv6 there shouldn't be a need for regex as there are no '.' characters and ':' does not cause a regex function. You might want to consider simply segmenting the ipv4 and ipv6 as two different filters? I know this defeats your purpose of using one filter to catch them all but the problem you are facing may be caused by trying to group ipv6 and ipv4 in the same filter.
Try doing them separately and let us know if that solves the issue of correctly filtering the ipv6 traffic while using the pipes to join multiple ipv6 in one filter.
-
If you are creating filter just for one IPv6, why to you use regular expression at all? Just input it as it is.
-
I'm no longer getting the error, but for whatever reason putting them together is not filtering them out. What it looks like I need to do is create a custom filter and determine how to put the ipv6 in as a regular expression, which I do not understand how to do. Do you know?
-
The solution Dmitrii proposed has also worked for me with no invalid IP address error.
Can you confirm that this is still not working for you and provide a screenshot if possible?
-
It worked for me. I just checked. Are you doing it in custom, rather than predefined?
-
When I put that in it tells me that it's an invalid IP address...
-
It should be
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148 -
It does work when I set up a predefined filter blocking IP, but only for that one ipv6 - when trying to add both it isn't working and I'm hoping to only have one filter that blocks multiple IPs... thoughts?
-
Again, is it working if you create a filter just for ipv6?
-
Basically, what I'm trying to do is build the functionality to have all of my IP addresses, both IPv4 and IPv6 in one GA filter. I selected a custom filter to exclude IP addresses that are equal to the below expression, but it's not working for the IPv6. Can someone tell me what's wrong with this setup?
174.99.90.148|2606:a000:4e2b:d500:8519:4fcb:8bf0:78d7
I'm pretty sure the regular expression is incorrect for the IPv6, but I don't know how to do it and cannot figure it out through research.
Thanks as always MOZ friends!
-
Well, try ipv6 by itself first. Make sure it's working, eliminate the variables, you know. If it works by itself, then you can start digging into regular expressions (even though it should be simple ipv6|ipv4 without escapes). Who knows - maybe fault is not in regular expressions, but address is wrong or something.
-
I'd like to put all of these IP addresses in one filter instead of several, which requires a regular expression. These IPs are ours, but I also want to add different partners' IP addresses on their sites. We work with about 50 different websites and I'm hoping to have this as just one of the filters. The regular expression works for the non-IPv6 (thanks!) IP, but the IPv6 one is not filtering.
Make sense? Thanks again for the help!
-
IPv6 is that long IP address.
Simply go to filters in GA, find predefined filter, choose exclude, choose "traffic from IP addresses" and paste your IP, which is 2606:a000:4e2b:d500:61d9:9d4e:c539:ea86.
-
Pardon the lack of knowing, but what is ipv6? How does that filter look in the GA filter? Thanks!
-
Hi there.
You should be able to exclude both IPs without any escaping. What I'd recommend is to create a filter just for ipv6 and see if exclusion works. Let me know if that works.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Help me exclude our dynamic IP addresses from GA
Hi There, I can't believe we are the first SEO Web Development company with the issue of dynamic IP addresses, for technical reasons our ISP keeps changing our IP addresses to different random IP addresses (no patterns, ranges, or reasoning to the specific changes) and we obviously need to exclude our own visits to google analytics - but I can't seem to find any simple way to do this in Google Analytics - can you help me find a simple solution for this? I did find two chrome extensions(I'll give you the links to those at the end) that I will look into if you cant help me find a simpler solution 🙂 Thanks so much!! https://chrome.google.com/webstore/detail/block-yourself-from-analy/fadgflmigmogfionelcpalhohefbnehm?hl=en https://chrome.google.com/webstore/detail/developer-cookie/lknhpplgahpbindnnocglcjonpahfikn
Reporting & Analytics | | Ruchy1 -
Need help Taking my Site to the Next Level
Any, and I mean ANY suggestions would be Great and Welcome, Good and Bad. Have a Good site, with what I believe good content, and just stuck at the same level for over 6 months. Please and Thank you for taking a few minute of time out of your day on this. Joe https://www.surecretedesign.com/
Reporting & Analytics | | surecreteproucts0 -
Spam using Hostname so filter not working
Hello, on one of our sites, we have filtered via the hostname. We have done this on other sites quite happily but on this particular new website, when we add in the hostname filter, we still get loads of direct and referral traffic which is junk - and the hostname of these junk referrals are the website's domain. So it seems that this filter is not working or the spam are now using the hostname? Not sure what is going on or how to solve this?
Reporting & Analytics | | AL123al0 -
Huge Analytics discrepancy when I turned off Analytics Module & Turned on GA via GTM
Hello, I was running universal GA via a GA Drupal module. We setup Google Tag Manager and setup a GA tag to run through GTM. When we pushed the GTM container live our Real Time was at around 1900 and when we turned off the Drupal module the Real Time was reporting around 1100. After 24 hours the sessions for that day were about 100k lower than what they usually are. Any ideas Why the larger discrepancy? Any places that are obvious to look? *I didn't setup the original Drupal GA module, nor do I know who did. Thanks
Reporting & Analytics | | JJLWeber0 -
Why do WMT's Search Analytics & GA's Real Time Keywords Differ?
I took a screen shot of the keywords from Google Analytics Real Time Keywords for Google / Organic. Then I waited a week and filtered Google Webmaster Tools' Search Analytics for queries with those keywords. None of them showed up. Why not? What I missing? Why do some keywords show up in Google Analytics RT for Google / Organic while most others are in Not Provided? I see WMT's Search Analytics says that it doesn't always show queries that "are made a very small number of times or those that contain personal or sensitive information." But most of my queries are like that. Anybody know any patterns / criteria that leads WMT to show some but not others? Thanks
Reporting & Analytics | | GilReich0 -
How to FILTER in Google Analytics an ad campaign from linkedin?
Hi mozzers We are setting up an a linkedin ad campaign for our agency and want to track its traffic and conversions. The linkedin ad will carry UTMs for each link. For tracking this campaign accurately I thought about creating a new GA View with a specific filter. So my question is about the filtering, should i use the INCLUDE, REFERRAL with pattern LINKEDIN.COM (see image)? if not what would be the best way to track this campaign? My other concern is that we are also running other a job ad on linkedin and I feel these hits will be tracked as well. Is there a way to separate those 2 campaigns? Thanks guys! MzE5hqE.png
Reporting & Analytics | | Ideas-Money-Art0 -
Has GA changed how it calculates bounce rate?
Updated website from Magento backend to Wordpress and since the redeploy, my bounce rate has dropped from 40% to 4%. I did check to see if there was duplicate GA tracking code but only one call. I checked reports under "visitor flow" and one page visits seem inline with the previous bounce rate. Weird. Never experienced this before.
Reporting & Analytics | | Timmmmy0 -
How to see traffic for specific keywords in GA
Hell guys, What i want to achieve is to generate a list of specific keywords showing traffic for a certain periode of time. I also want so be able to compare this time period with historical data. I want a list as shown in: Traffic sources -> sources -> search -> organic. This shows a list of keywords generating traffic out of the organic search results. When you use a filter you can only use one word so it seems. I just want to create that list but with the specific keywords i choose to display. I tried advanced reports and advanced segments but that doesn't really give me what i want. The idea behind this whole thing is that i want to give my client an overview of the traffic received on the words we are optimizing for. this traffic has to be compared to the previous month so they can see clearly if there were changes. Thx !
Reporting & Analytics | | 5MMedia0