Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
How to exclude traffic for a specific mobile device in Google Analytics view?
-
Hi,
Need help on how to exclude traffic for a specific mobile device in Google Analytics view. I have been searching and the only information available is excluding IP address of internal traffic. Is there any way to exclude traffic through a mobile MAC address?
-
Hi Martijn,
Thank you. Could you direct me to useful resources/reading material on this? I will need to understand this in depth before I could implement.
Really appreciate your time on this.
-
Hi Khadija,
You have to be a bit technical to get what I mean here, but you give the user a specific parameter and based on that you set a cookie or keep on pushing that user to pages with that parameter. Based on the cookie or the parameter you can excluding your tracking code from that user so it doesn't end up in your reports.
Martijn.
-
Hi Martijn,
Thanks. The challenge about excluding specific device is that - the client uses an iphone 6S and most of our relevant traffic and few orders have also come from an iphone 6S, hence if I exclude this model, I will also be excluding a lot of relevant traffic.
When you say identify the user in a specific way - could you give me some examples. What metrics should I look at, how do I identify this?
-
Excluding a specific model is going to be pretty hard as that information is coming from information that is aggregated and then defined as a certain mobile device model. What you could do is apply a segment and make sure it's excluding that specific device. Otherwise I would make sure to identify that specific user in another way and make sure it's excluded through a proper filter on view level.
-
Hi Alick,
Thank you. I wouldn't want to exclude an entire mobile model. I actually just want to exclude the client's mobile for GA to be more relevant and not be skewed in time/session and number of sessions due to the client.
-
Hi,
Apart from excluding internal traffic by IP address you can also exclude/include traffic by mobile brand name, mobile model name but not particular mobile device. You can do this by creating custom filter at view level.
Thanks
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Website excluded from indexing, google-selected canonical: N/A
The google search console revealed to me that none of my pages was indexed, all pages are listed in the 'excluded' section "duplicate, google chose different canonical than user".
Reporting & Analytics | | Fibigrus
But in the URL-inspection tab it shows me google-selected canonical: N/A Indexing and crawling is both allowed. Don't know how to get my pages to be indexed correctly. (by the way, they do NOT exist in other languages, so that can't be a reason why google might think they are a duplicate. There's definitively no other version of those pages available)0 -
Is there a way to filter all computers on a specific IPv6 network in Google Analytics?
Is there a quick way of filtering the IP addresses for all the computers on a network that's using IPv6? I want to filter out visits to our websites from the devices on our office network, but each computer (and phone and tablet) seems to have a different address. It _looks _like they all start the same way, though. One computer is xxxx:xxxx:xxxx:xxxx:aaaa:aaaa:aaaa:aaaa, another is xxxx:xxxx:xxxx:xxxx:bbbb:bbbb:bbbb:bbbb, my phone is xxxx:xxxx:xxxx:xxxx:cccc:cccc:cccc:cccc, etc. Does this mean that xxxx:xxxx:xxxx:xxxx is the address for our network as a whole, and I can just set up a Google Analytics filter for "IP addresses starting with..."? Or would doing that also filter out hits from, like, every visitor within a 20 mile radius of our office? If I need to simply put in the individual addresses for each and every device, I will. I'm just hoping it doesn't come to that. Thanks!
Reporting & Analytics | | BrianAlpert780 -
UTM Links Showing Up as Separate Pages in Google Analytics
Hey everyone, I was just looking at landing pages in Google Analytics, and in addition to just the URL of the landing page, the UTM links are being listed as separate pages. Is this normal? I anticipated seeing the landing page URL and then using the secondary dimension to see source/medium. If this isn't normal, what would I check next?
Reporting & Analytics | | rachelmeyer0 -
Should Google Trends Match Organic Traffic to My Site?
When looking at Google Trends and my Organic Traffic (using GA) as percentages of their total yearly values I have a correlation of .47. This correlation doesn't seem right when you consider that Google Trends (which is showing relative search traffic data) should match up pretty strongly to your Organic Traffic. Any thoughts on what might be going on? Why isn't Google Trends correlating with Organic Traffic? Shouldn't they be pulling from the same data set? Thanks, Jacob
Reporting & Analytics | | jacob.young.cricut0 -
Tracking time spent on a section of a website in Google Analytics
Hi, I've been asked by a client to track time spent or number of pages visited on a specific section of their website using Google Analytics but can't see how to do this. For example, they have a "golf" section within their site and want to measure how many people either visit 5 page or more within the golf section or spend at least 6 minutes browsing the various golf section pages. Can anyone advise how if this can be done, and if so, how I go about it. Thanks
Reporting & Analytics | | geckonm0 -
Organic Traffic From...Mountain View, CA?
I've noticed something a little odd in my organic search traffic lately. Looking at several websites that target the Minneapolis area, I'm seeing some organic searches come in (typically using head keywords - no geo-modifier) from Mountain View, CA. There's no way we are truly ranking well on these terms in California, so it certainly feels like Google sniffing around. I was worried that perhaps they were checking into penalizing us or something, but we've actually seen upticks in search traffic lately. This traffic is not showing up in Google Analytics, just Adobe SiteCatalyst. In the past, spikes from random locations were probably some sort of crawler, like the preview bot, but these are coming in as searches with (for now) keyword data. Has anyone else seen anything like this?
Reporting & Analytics | | SarahLK0 -
Localhost:4444 Showing Up in Google Analytics
Hello All, Lately in my Google Analytics account I have noticed a referral source labelled: localhost:4444 The number of visits is really high from this source, but I have no idea (no clue!) what it actually means. Can anyone shed some light on what this is about? Should I be creating some sort of filter to screen out this as a referral source (assuming it is not legitimate)? Many thanks in advance. Cheers!
Reporting & Analytics | | Robert-B0 -
Comparing % Change, Google Analytics
Hey Mozzers, Is there a simple way to compare the "% Change" in traffic when comparing two separate time periods in a single Google Analytics report? When comparing data from two separate time periods, an exported CSV doesn't include the % Change (booo!), and there's no option to sort by % Change within the GA report, essentially forcing you to scroll through all the results to pinpoint the major movers and shakers. I'm not averse to using spreadsheets to sort this data, but I'm thinking that I'd likely need a macro to make this work, something like this. However, none of the macros on that page are working (possibly because they were designed for a previous version of Analytics). All suggestions are appreciated. Thanks!
Reporting & Analytics | | dangaul0