Should I use always the highest bid?
-
In google adwords the highest bid apparently gets more impressions, but always more clicks?
I wonder if I can save money by not targeting the 1st position, but from example 3-6, the ad will still be visible once the search results come in.
how do you guys usually set the bid?
-
It really depends on whether you are looking for a higher CTR or a lower CPA. This will vary depending on what your goal is. If you are just trying to drive any and all traffic, then generally higher bids and first position will almost always result in more raw traffic.
If you are driving to a landing page though, and your goal is to get qualified traffic to not only click on the add but convert through some sort of call to action, often a lower average ad position can pay off quite well for you. Especially if there are a lot of ads and you have 3 ads on top of the organic listing and several more on the right side of the SERP. In those cases, I often find a lot of success in qualified clicks with an average position of 4.5.
Of course it does depend on your vertical, and B2B and B2C often act very differently.
-
How much time/data do you have in Adwords?
We've lowered our highest bid and seen the same amount of traffic/conversions even though we aren't the "top bid" anymore.
I suspect this will vary greatly depending on what niche you are in and how much you mess with your bid (i..e top bid gets a LOT of eyeballs, middle bid gets some, low bid may not even display).
you have to decide if that sweet spot where the ad displays in the middle generates a better bid price and conversion against the "paying full price" for the top spot.
so in short, test both over a period of time and then go back and check the conversion data! :>)
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
We changed our domain, I used the move tool in Google Search Console and I am having our site redirected and go daddy, and now I spoke with someone who suggest we do a 301 redirect for all pages on our site and I’m not sure that’s the correct move.
We just changed our domain name after 15 years. when I bought the new domain name I called Go Daddy and they instructed me to contact my google G sweet admin account and change all of our emails over which I did and then I went into Shopify who is my host and changed my primary domain there and then I went back to Go Daddy and had my old website forwarded to my new site. since then there has been nothing but problems with Google. my product feed from my merchant center account has been suspended three or four times now, I tried to rename and move all of my Google accounts from my old domain to my new one, but I am not an SEO person... after making the changes I have started google chats with analytics department with the merchant center with Google as they all keep saying that it looks fine but I’m not convinced because the product feed keeps getting disapproved. So I posted an ad for help and the Guy I spoke with suggested I do a 301 redirect for every single page on my old site, But I’m concerned that might confuse things further? I’ve already started the move in Google Search console And in Shopify I added the old domain back into the domains section and am having it redirectEd that way too... I guess I’m just looking to know which way I should proceed, any and all advice is warmly welcome thank you in advance Maureen
Conversion Rate Optimization | | TooFast130 -
Using Anchor Link in the Main Navigation
Has anyone ever used anchor links as a drop-down in a sub-collection from the main navigation and does it have any negative impact on link equity? My client has large product collections and sub-collections, these are then separated into further subsections which are open within the same page (see attached). What I want to do ideally is in the main navigation feature 'Mad Hatter Costumes and Accessories'. This will obviously have a # in the URL though and I am was wondering if this might hurt the chance of the page ranking? If anyone has any experience in this it would be really helpful!! Thanks in advance 🙂 m5Qd5VO
Conversion Rate Optimization | | BAO.Agency0 -
Should Mobile Header Design Use Big White Area for Large Male Thumbs when 65% + of Visitors are Male?
About 65% of our visitors are male. Consultant "A" produced design "A" (see attached). This design incorporates large white areas so there there is sufficient space for male visitors with larger fingers. Consultant "A" also was of the opinion that the menu "hamburger" bar should have the word "menu" under it and that displaying it would increase conversions. Consultant "B" is of the opinion that displaying as much content above the fold is key to maximizing conversions. They believe that we don't have to use so much space between elements and that the word "Menu" is not necessary to display beneath the hamburger. I have enclosed design "B" from consultant "B". Personally I prefer the 2nd design, however I understand that conversion is down to a science and there are certain accepted protocols and standards that serve to increase conversions. Does anyone have opinion as to which of the 2 attached designs would work best for conversions? Thanks,
Conversion Rate Optimization | | Kingalan1
Alan UOf1rKo eQRWToZ0 -
Use "Brand Name" or things like "Free Shipping" in Ecommerce Product Title Tags?
Given the current industry best practices and changes to Google algorithms, should I be using "Product name...Brand Name" or something like "Product Name...Free Shipping (or similar)" in my ecommerce title tags? Thanks!
Conversion Rate Optimization | | jeffbstratton0 -
Using my Adwords budget
Hi, I have a huge budget for adwords but I only seem to be using about 1/10 of it daily. How to I go about using more budget but also keeping my conversion costs and % around the same? And should each campaign have its own set of unique keywords? Should these keywords never appear in more than 1 campaign? Any tips on maximising budget and increasing conversions would be great. Thanks
Conversion Rate Optimization | | YNWA1 -
How to use a large budget
Hi All, This is more of an open discussion to gather some advice / strategy tips for a large spending client - so looking for some experts tips here. Potentially, there is a large client on the horizon, with a budget for 'SEO' starting at the 15k PM region. My question is- in what way would you personally begin to utilise this budget in absolute benefit of the client. What would you propose strategy-wise to begin with, what else would you incorporate along the line? How would you generate results not just from SEO, but from additional channels? PS - They have a separate budget for PPC. An open discussion and plenty of ideas would be fantastic.
Conversion Rate Optimization | | Webrevolve0 -
Any providers offering a/b testing using JS callbacks?
Hi all, I am looking to test the impact of buy button wording on conversion rate. The website in question has a few thousand products on non-dynamic URLs. The common a/b testing products on the market restrict tests to a single URL, or you have to enter all the URLs being tested which isn't practical. Ideal Solution What I'd really like to do is: use the provider's web app to configure an experiment with a name and a description of the variations; use some JS code to run the experiment with a callback to carry out the variation. This would allow me to easily put this code on the product details page template. I've written example code below for how this would look. When the experiment is run, the provider's framework would a) tell my code what variation to run, and b) handle the measuring of conversion rate. Questions Are there any providers which work like this? Is there an alternative solution on the market? If there isn't someone already doing this, would it be useful to anyone else? Joel // Loads the provider's framework. // Setting the experiment to run when doc is ready.
Conversion Rate Optimization | | switchplane
// Assumes jQuery environment.0 -
Difficulty Using GWO?
I've tried several times to use GWO, and I can handle copy-pasting some code etc... yet despite this, it seems that I can't get GWO right. Furthermore, it appears to me that a lot of the things you'd like to test require fancier manipulation of GWO than the standard setup allows for. Do you guys also find GWO to lack user-friendliness? Are other platforms easier to use and get right?
Conversion Rate Optimization | | Gab-Goldenberg0