Help with GA Filters - IP Addresses
-
I'm having a hard time filtering out both of the IP addresses at our office. One is easy with regular expressions, but the other one does not seem to be working.
Here are the two IP addresses:
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86
174.99.90.148I set up these two custom filters and neither worked for the longer IP address.
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148Would you please help steer me in the right direction? Thanks as always MOZ friends!
-
Figured it out fully! This is how I needed to write the filter to have both in a regular expression:
174.99.90.148|^2606:a000:4e2b:d500
Thanks again everyone for steering me in the right direction!
-
Not sure why, but it looks like we just have to have separate filters for ipv6 versus ipv4s... works that way, but not combined for whatever reason.
Thanks for the help everyone!
-
I would agree with Dmitrii again on this one. For ipv6 there shouldn't be a need for regex as there are no '.' characters and ':' does not cause a regex function. You might want to consider simply segmenting the ipv4 and ipv6 as two different filters? I know this defeats your purpose of using one filter to catch them all but the problem you are facing may be caused by trying to group ipv6 and ipv4 in the same filter.
Try doing them separately and let us know if that solves the issue of correctly filtering the ipv6 traffic while using the pipes to join multiple ipv6 in one filter.
-
If you are creating filter just for one IPv6, why to you use regular expression at all? Just input it as it is.
-
I'm no longer getting the error, but for whatever reason putting them together is not filtering them out. What it looks like I need to do is create a custom filter and determine how to put the ipv6 in as a regular expression, which I do not understand how to do. Do you know?
-
The solution Dmitrii proposed has also worked for me with no invalid IP address error.
Can you confirm that this is still not working for you and provide a screenshot if possible?
-
It worked for me. I just checked. Are you doing it in custom, rather than predefined?
-
When I put that in it tells me that it's an invalid IP address...
-
It should be
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148 -
It does work when I set up a predefined filter blocking IP, but only for that one ipv6 - when trying to add both it isn't working and I'm hoping to only have one filter that blocks multiple IPs... thoughts?
-
Again, is it working if you create a filter just for ipv6?
-
Basically, what I'm trying to do is build the functionality to have all of my IP addresses, both IPv4 and IPv6 in one GA filter. I selected a custom filter to exclude IP addresses that are equal to the below expression, but it's not working for the IPv6. Can someone tell me what's wrong with this setup?
174.99.90.148|2606:a000:4e2b:d500:8519:4fcb:8bf0:78d7
I'm pretty sure the regular expression is incorrect for the IPv6, but I don't know how to do it and cannot figure it out through research.
Thanks as always MOZ friends!
-
Well, try ipv6 by itself first. Make sure it's working, eliminate the variables, you know. If it works by itself, then you can start digging into regular expressions (even though it should be simple ipv6|ipv4 without escapes). Who knows - maybe fault is not in regular expressions, but address is wrong or something.
-
I'd like to put all of these IP addresses in one filter instead of several, which requires a regular expression. These IPs are ours, but I also want to add different partners' IP addresses on their sites. We work with about 50 different websites and I'm hoping to have this as just one of the filters. The regular expression works for the non-IPv6 (thanks!) IP, but the IPv6 one is not filtering.
Make sense? Thanks again for the help!
-
IPv6 is that long IP address.
Simply go to filters in GA, find predefined filter, choose exclude, choose "traffic from IP addresses" and paste your IP, which is 2606:a000:4e2b:d500:61d9:9d4e:c539:ea86.
-
Pardon the lack of knowing, but what is ipv6? How does that filter look in the GA filter? Thanks!
-
Hi there.
You should be able to exclude both IPs without any escaping. What I'd recommend is to create a filter just for ipv6 and see if exclusion works. Let me know if that works.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Need help Taking my Site to the Next Level
Any, and I mean ANY suggestions would be Great and Welcome, Good and Bad. Have a Good site, with what I believe good content, and just stuck at the same level for over 6 months. Please and Thank you for taking a few minute of time out of your day on this. Joe https://www.surecretedesign.com/
Reporting & Analytics | | surecreteproucts0 -
Query on google analytic event report and customized report - Please help.
For my site I placed Black Friday offer.Now I have highlighted one product at homepage banner and tracking that with event. I am sharing with you actual figures of 1 day from Google analytic. Your proper response on this query will really really really helpful to me for understanding google analytic deeply and properly. So pls give your precious time for answering me, I will be thankful to you from bottom of my heart. I am checking event report from behavior, following is report for by that product event - Sessions - 30
Reporting & Analytics | | pragnesh9639
Unique Events - 30
Total Events - 34
Ecommerce Conversion Rate - 3.33% I am checking now report from All pages via Behaviour section - Page views - 97, Unique Page Views - 62, Entrances - 7, Bounce Rate - 57.14%, %Exit - 17.53% Now I create customize report for the same by adding
session -7
Ecommerce conversion rate - 0
unique events -4 MY query - when I added session in customized report then it is different from Event session why (7 and 30) ? same way Ecommerce conversion rate in customized report showing 0% why ( 0% and 3.33% ) ? same way unique events 4 and 30 ? do you suggest what is the best way to analysis such page or what will be best customize report for such analysis? Thanks0 -
Days to transaction - GA
Hi We have noticed a trend with days to transaction being high for May - June for Organic for 28+ days. Does anyone have any helpful articles or ideas on why this is happening for organic?
Reporting & Analytics | | BeckyKey0 -
How is this site being tracked in GA?
Hi, Bit of an unusual one this, so please bear with me. This site http://www.hayesandhurst.com/ is being tracked in Google Analytics but we're unsure as to how. To the best of our knowledge we haven't inserted the tracking ID into the theme options or the tracking code into the source - and yet it appears to be tracking successfully! I did send some instructions to the client to set up the Analytics account in their name - I fear they have added the code somewhere to the site, but we cannot see where! Perhaps via Google tag Manager?? As I say, an odd one this, but if anyone can shed any light on this mystery i'd be hugely grateful. The tracking ID is UA-64505394-1 for the record. Regards,
Reporting & Analytics | | nathangdavidson
Nathan0 -
URL String Tracking Question--Need help!
I am doing some research for a freelance project and found a URL receiving a decent amount of traffic from search with this url string after the normal page url (xxx.com/credit-card-counseling.aspx?match=e&query=debthelper.com&id=22097628847&id=1810807655) Is this some sort of GA tracking code? Why would it be used on that page to track organic search hits if that happens automatically? Would love some help figuring this out! Thanks,
Reporting & Analytics | | RickyShockley0 -
Google Webmaster Tools is showing wrong data - help?
Hey all, I'm seeing some weird problems with Webmaster Tools. Specifically: We've submitted a sitemap with 174k URLs. According to the WMT dashboard, only 21 are indexed, though if you search our site via site:sitename.com blah blah, there are thousands of pages returned. Why is WMT only showing 21 indexed pages? Yet if I go to Health -> Index Status, it's showing nearly 199k URLs indexed. This seems consistent with searching Google site:sitename.com blah blah. Under "Search Queries", it's showing "no data available". Not sure why as it's linked to the proper Google Analytics account, which has keyword data. Any ideas what I'm doing wrong here? Thanks.
Reporting & Analytics | | chimptech0 -
Filter out IP address of Site Search analytics
Hi Mozzers, I have a filter that excludes all internal traffic from my sites. But this does not seem to work on site search > Search Terms See here:- http://productforums.google.com/forum/#!searchin/analytics/filter$20site$20search/analytics/pO18L31hEO4/tJ3lKVNT3YYJ Any ideas? Or is it a bug, etc Thanks S
Reporting & Analytics | | Metropolis0 -
Help with Analytics
Afternoon all - I hope someome might be able to help me getting some data out of Google Analytics. I want to try pull a report which will show me both what the last page before a goal completion was and the country that generated the click. Is that possible at all? When I go to look at goals, I can only pull data for the last page before the goal click ... and when I look at my goals in the Pages>Content menu, I can only view country. So is there any way of pulling the two set of data together at all? Any thoughts would be really appreciated. Thanks very much, Simon
Reporting & Analytics | | theshortstack0