Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Using logical operators (AND / OR) in Google Analytics Goal Funnels
-
When setting up a Funnel within Google Analytics, is it possible to use logical operators (e.g. OR, AND) in the first (required) step of the funnel? For example, suppose I want to track users who visit page1.html AND page2.html before proceeding to the destination goal.
I've entered two pages separated by the OR operator, and neither the "Verify this Goal" nor "Save" produces an error message - is it safe to assume that this is working as I intend?
Thanks in advance!
-
Thanks, Peter. That's useful to know.
I ultimately found an easier solution. My situation is that I'm changing some URLs and I want to keep consistent tracking of my funnels/goals.
So if I changed a URL from say page1.htm to page2.htm, I was thinking I needed to define the associated funnel to be page1.htm OR page2.htm. However, I discovered that if I simply changed the funnel from the former to the latter, all of the historical data for page1.htm would be combined with new data collected for page2.htm. Thus, the logical operator wasn't necessary.
-
Yes - but there is one thing that you should know. Once you enable RegEx ALL your parameters in funnel should be regexed.
https://support.google.com/analytics/answer/1116091?hl=en#matchTypes
"Match Types: Begins with, Equals to, & Regular Expression
There are three diferent match types that define how Analytics identifies a URL for either a goal or a funnel. The match type that you select for your goal URL also applies to the URLs in the funnel, if you create one." -
Trenton,
Thanks for the suggestion. I'm trying it your way and will test shortly!
Best,
Akira
-
Hey Akira,
In the interest of a fast response, I have to admit I'm not 100% positive on this, that said I believe and my research (1, 2, 3) has supported the below response:
I do not believe that you can use logical operators to setup a step of the goal funnel, but you CAN use RegEx.
A simple RegEx to help here would be: (page1.html|page2.html). The () are just a grouping & the | is the OR operator.Hope that helps! Let me know if you have any issues on this. I would recommend testing your solution (make sure you haven't excluded the IP you're on) to ensure it's working properly. You should be able to see it ~2 hours after you complete the test.
Regards,
Trenton
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Website excluded from indexing, google-selected canonical: N/A
The google search console revealed to me that none of my pages was indexed, all pages are listed in the 'excluded' section "duplicate, google chose different canonical than user".
Reporting & Analytics | | Fibigrus
But in the URL-inspection tab it shows me google-selected canonical: N/A Indexing and crawling is both allowed. Don't know how to get my pages to be indexed correctly. (by the way, they do NOT exist in other languages, so that can't be a reason why google might think they are a duplicate. There's definitively no other version of those pages available)0 -
Google Analytics Question - Impressions & Queries Up, Sessions Down
I'm working with a client who, according to the Google Query report, impressions and sessions are up since we've started work with them about 6 months ago, but Google sessions are down. In moz, we're seeing a gradual, but steady increase in search visibility specifically with Google. Note: this is all organic. From when we started tracking queries, the first month we were tracking there were 43,581 impressions and 690 click throughs for the month. This past month there were 98,293 queries and 1015 clicks throughs for the month (granted not year over year data) - of these 1,015 clicks, 995 of them were from web. However, for those same time periods, sessions from Google are down over 30% - 1,750 vs. 1,189. I'm not sure how to interpret this. I realize that clicks and sessions are not a straightforward comparison, but I would think that if clicks were up according to the query report that sessions would also be up. Is it that some of these clicks are bouncing and therefore not being tracked as a session? Is there a potential issue with how data is being tracked?
Reporting & Analytics | | Corporate_Communications0 -
Tracking time spent on a section of a website in Google Analytics
Hi, I've been asked by a client to track time spent or number of pages visited on a specific section of their website using Google Analytics but can't see how to do this. For example, they have a "golf" section within their site and want to measure how many people either visit 5 page or more within the golf section or spend at least 6 minutes browsing the various golf section pages. Can anyone advise how if this can be done, and if so, how I go about it. Thanks
Reporting & Analytics | | geckonm0 -
Google Analytics - Keywords (not set) or ( not provided) WHY???
In Analytics, most of my visitors are landing on my home page, but when trying to see wich keywords they use, most of them are: (not set) or ( not provided) See screencast: http://screencast.com/t/AKwPW76qLVsN Can you tell why? What is going on? Is there a way to solve this? Thank you, BigBlaze
Reporting & Analytics | | BigBlaze2050 -
Setting up Google Analytics for Subsites
I currently have one main .com site and am planning on launching geo-location subsites .co.uk, .com.au, .ru, etc... Traffic will flow between both sites and some of the content on the subsites will be duplicate and therefore include a canonical tag to the main site. I want to set up GA to capture who is going to the subsites and vice versa and correctly capture crossover traffic. Any advice on implementing advanced analytics directly (or links to sources that will direct me the right direction for this project)
Reporting & Analytics | | theLotter0 -
Setting up Google Analytics default URL
If someone has set: the default url in Google Analytics to a non-www address (http://mysite.com) then placed the UA tracking script from that GA account within the CMS framework of the website... ... and then set the permanent 301 redirect in the htaccess file to redirect to the www address (http://www.mysite.com). How less accurrate will my GA analytics measurements be considering the default url within GA is non-www and the permanent 301 redirect in htacess is to the www-address? Anyone know how reliable GA reports are until the default url in GA analytics is changed to match what is the redirected url in htaccess file? _Cindy
Reporting & Analytics | | CeCeBar0 -
Custom Variables to track Vimeo plays on website with Google Analytics?
Hello Everyone, I'm trying to track how many times a Vimeo video is played on my site via GA. Does any of you have any knowledge of how can this be achieved? I've read the documentation and came up with this: After the iframe embed i insert this: Of course the GA is loaded in the header. Does not work, at least i cant see anything in analytics. I have set up the segment as per the attached image. Thanks in advance! Alex E6XnO.png
Reporting & Analytics | | pwpaneuro0 -
AW Stats vs Google Analytics
Hey Moz Community, I am looking to get opinions on the best practice for analytics/traffic analysis. From experience I know that AW Stats reads high and Google Analytics reads low for traffic for reason in this article http://www.smartz.com/blog/2009/01/23/analytic-confusion-%E2%80%93-awstats-vs-google-analytics/ It drives me a little nuts how far off both are for some pages. I have one article that shows 100 views (GA) and AW stats shows 5 times that number of views. Any suggestions or systems you recommend? Thanks
Reporting & Analytics | | johnshearer0